[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6aa6947865795fc534b61f5b8a80b3c42fd5a0cd.camel@mediatek.com>
Date: Thu, 3 Aug 2023 07:20:15 +0000
From: Jiaxin Yu (俞家鑫) <Jiaxin.Yu@...iatek.com>
To: "broonie@...nel.org" <broonie@...nel.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-mediatek@...ts.infradead.org"
<linux-mediatek@...ts.infradead.org>,
"ajye_huang@...pal.corp-partner.google.com"
<ajye_huang@...pal.corp-partner.google.com>,
Chunxu Li (李春旭) <Chunxu.Li@...iatek.com>,
Allen-KH Cheng (程冠勲)
<Allen-KH.Cheng@...iatek.com>,
"dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
"kuninori.morimoto.gx@...esas.com" <kuninori.morimoto.gx@...esas.com>,
"andrzej.hajda@...el.com" <andrzej.hajda@...el.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Project_Global_Chrome_Upstream_Group
<Project_Global_Chrome_Upstream_Group@...iatek.com>,
"robert.foss@...aro.org" <robert.foss@...aro.org>,
"Laurent.pinchart@...asonboard.com"
<Laurent.pinchart@...asonboard.com>,
"neil.armstrong@...aro.org" <neil.armstrong@...aro.org>,
"angelogioacchino.delregno@...labora.com"
<angelogioacchino.delregno@...labora.com>,
"nfraprado@...labora.com" <nfraprado@...labora.com>,
"alsa-devel@...a-project.org" <alsa-devel@...a-project.org>
Subject: Re: [v3 2/3] ASoC: mediatek: mt8186: correct the HDMI widgets
On Wed, 2023-08-02 at 17:38 +0100, Mark Brown wrote:
> On Wed, Aug 02, 2023 at 02:52:57PM +0000, Jiaxin Yu (俞家鑫) wrote:
> > On Mon, 2023-07-31 at 12:50 +0100, Mark Brown wrote:
> > > On Mon, Jul 31, 2023 at 02:08:02AM +0800, Jiaxin Yu wrote:
> > > > Use SND_SOC_DAPM_LINE instead of SND_SOC_DAPM_OUTPUT to trigger
> > > > DAPM events to hdmi-codec when userspace control the DPAM pin.
> > > Why?
> > I have defined an SOC_DAPM_PIN_SWITCH that named as "HDMI1", if I
> > use
> > SND_SOC_DAPM_OUTPUT, it can't be controlled by HDMI1's PIN_SWITCH.
>
> ...
>
> > 2762 if (w->dapm->card->fully_routed)
> > 2763 return;
> > 2764 ep = SND_SOC_DAPM_EP_SINK;
> > 2765 snd_soc_dapm_widget_for_each_sink_path(w, p) {
> > 2766 if (p->sink->id == snd_soc_dapm_spk ||
> > 2767 p->sink->id == snd_soc_dapm_hp
> > ||
> > 2768 p->sink->id ==
> > snd_soc_dapm_line
> > > >
> >
> > 2769 p->sink->id ==
> > snd_soc_dapm_input)
> > {
> > 2770 ep = 0;
>
> The expectation here is that you'll connect the output to a widget
> that
> corresponds to the physical output on your board and put the pin
> switch
> on that, ideally with a label that corresponds to case markings or
> what
> the physical output is called on the board.
Dear brown,
I agree with you, in fact the speaker is indeed doing this way. But
about the hdmi that on the board, I did not find a defination link
snd_soc_dapm_hdmi, so I use snd_soc_dapm_line to replace. The purpose
is to control it link speaker. Or what do you suggest I should do?
Thank you very much.
Powered by blists - more mailing lists