lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230804234553.3egec5i5tyfyg4hz@intel.intel>
Date:   Sat, 5 Aug 2023 01:45:53 +0200
From:   Andi Shyti <andi.shyti@...nel.org>
To:     Michał Mirosław <mirq-linux@...e.qmqm.pl>
Cc:     Svyatoslav Ryhel <clamor95@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Wolfram Sang <wsa@...nel.org>, linux-i2c@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 2/2] i2c: Add GPIO-based hotplug gate

On Tue, Aug 01, 2023 at 01:01:43AM +0200, Michał Mirosław wrote:
> On Mon, Jul 31, 2023 at 12:11:47AM +0200, Michał Mirosław wrote:
> > On Sun, Jul 30, 2023 at 10:25:07PM +0200, Andi Shyti wrote:
> > > On Sat, Jul 29, 2023 at 07:08:57PM +0300, Svyatoslav Ryhel wrote:
> > > > +static int i2c_hotplug_activate(struct i2c_hotplug_priv *priv)
> > [...]
> > > > +{
> > > > +	int ret;
> > > > +
> > > > +	if (priv->adap.algo_data)
> > > > +		return 0;
> > [...]
> > > > +	ret = i2c_add_adapter(&priv->adap);
> > > > +	if (!ret)
> > > > +		priv->adap.algo_data = (void *)1;
> > > 
> > > You want to set algo_data to "1" in order to keep the
> > > activate/deactivate ordering.
> > > 
> > > But if we fail to add the adapter, what's the point to keep it
> > > active?
> > 
> > The code above does "if we added the adapter, remember we did so".
> > IOW, if we failed to add the adapter we don't set the mark so that
> > the next interrupt edge can trigger another try. Also we prevent
> > trying to remove an adapter we didn't successfully add.
> 
> Maybe the function's name is misleading? We could find a better one.
> Activation/deactivation in this driver means "initialize/shutdown the
> hotplugged bus" and is done in response to an edge (triggering an
> interrupt) of the hotplug-detect signal.

So that algo_data is randomly chosen as a boolean value given the
fact that this particular driver doesn't have its own algorithms
but it's using the ones from the parent. Right?

If so, can we have a different and more meaningful boolean value
for this?

And... thinking aloud... are there race conditions here? I
mean... you can't attach two docking stations, but are there
other scenarios?

Thanks,
Andi

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ