| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 4 Aug 2023 08:04:48 +0000
From: Al Grant <Al.Grant@....com>
To: Anshuman Khandual <Anshuman.Khandual@....com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
CC: Anshuman Khandual <Anshuman.Khandual@....com>,
Mike Leach <mike.leach@...aro.org>,
"coresight@...ts.linaro.org" <coresight@...ts.linaro.org>,
"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH] coresight: etm: Make cycle count threshold user
configurable
> -----Original Message-----
> From: Anshuman Khandual <anshuman.khandual@....com>
> Sent: Friday, August 4, 2023 5:47 AM
> To: linux-arm-kernel@...ts.infradead.org
> Cc: Anshuman Khandual <Anshuman.Khandual@....com>; Mike Leach
> <mike.leach@...aro.org>; coresight@...ts.linaro.org; linux-doc@...r.kernel.org;
> linux-kernel@...r.kernel.org
> Subject: [PATCH] coresight: etm: Make cycle count threshold user configurable
>
> Cycle counting is enabled, when requested and supported but with a default
> threshold value ETM_CYC_THRESHOLD_DEFAULT i.e 0x100 getting into
> TRCCCCTLR, representing the minimum interval between cycle count trace
> packets.
>
> This makes cycle threshold user configurable, from the user space via perf event
> attributes. Although it falls back using ETM_CYC_THRESHOLD_DEFAULT, in case
> no explicit request. As expected it creates a sysfs file as well.
>
> /sys/bus/event_source/devices/cs_etm/format/cc_threshold
>
> New 'cc_threshold' uses 'event->attr.config3' as no more space is available in
> 'event->attr.config1' or 'event->attr.config2'.
>
> Cc: Suzuki K Poulose <suzuki.poulose@....com>
> Cc: Mike Leach <mike.leach@...aro.org>
> Cc: James Clark <james.clark@....com>
> Cc: Leo Yan <leo.yan@...aro.org>
> Cc: coresight@...ts.linaro.org
> Cc: linux-arm-kernel@...ts.infradead.org
> Cc: linux-doc@...r.kernel.org
> Cc: linux-kernel@...r.kernel.org
> Signed-off-by: Anshuman Khandual <anshuman.khandual@....com>
> ---
> Documentation/trace/coresight/coresight.rst | 2 ++
> drivers/hwtracing/coresight/coresight-etm-perf.c | 2 ++
> drivers/hwtracing/coresight/coresight-etm4x-core.c | 12 ++++++++++--
> 3 files changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/trace/coresight/coresight.rst
> b/Documentation/trace/coresight/coresight.rst
> index 4a71ea6cb390..b88d83b59531 100644
> --- a/Documentation/trace/coresight/coresight.rst
> +++ b/Documentation/trace/coresight/coresight.rst
> @@ -624,6 +624,8 @@ They are also listed in the folder
> /sys/bus/event_source/devices/cs_etm/format/
> * - timestamp
> - Session local version of the system wide setting:
> :ref:`ETMv4_MODE_TIMESTAMP
> <coresight-timestamp>`
> + * - cc_treshold
Spelling: cc_threshold
> + - Cycle count treshhold value
>
> How to use the STM module
> -------------------------
> diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c
> b/drivers/hwtracing/coresight/coresight-etm-perf.c
> index 5ca6278baff4..09f75dffae60 100644
> --- a/drivers/hwtracing/coresight/coresight-etm-perf.c
> +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
> @@ -68,6 +68,7 @@ PMU_FORMAT_ATTR(preset, "config:0-3");
> PMU_FORMAT_ATTR(sinkid, "config2:0-31");
> /* config ID - set if a system configuration is selected */
> PMU_FORMAT_ATTR(configid, "config2:32-63");
> +PMU_FORMAT_ATTR(cc_threshold, "config3:0-11");
>
>
> /*
> @@ -101,6 +102,7 @@ static struct attribute *etm_config_formats_attr[] = {
> &format_attr_preset.attr,
> &format_attr_configid.attr,
> &format_attr_branch_broadcast.attr,
> + &format_attr_cc_threshold.attr,
> NULL,
> };
>
> diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c
> b/drivers/hwtracing/coresight/coresight-etm4x-core.c
> index 9d186af81ea0..9a2766f68416 100644
> --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
> +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
> @@ -644,7 +644,7 @@ static int etm4_parse_event_config(struct
> coresight_device *csdev,
> struct etmv4_config *config = &drvdata->config;
> struct perf_event_attr *attr = &event->attr;
> unsigned long cfg_hash;
> - int preset;
> + int preset, cc_threshold;
>
> /* Clear configuration from previous run */
> memset(config, 0, sizeof(struct etmv4_config)); @@ -667,7 +667,15 @@
> static int etm4_parse_event_config(struct coresight_device *csdev,
> if (attr->config & BIT(ETM_OPT_CYCACC)) {
> config->cfg |= TRCCONFIGR_CCI;
> /* TRM: Must program this for cycacc to work */
> - config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT;
> + cc_treshold = attr->config3 & ETM_CYC_THRESHOLD_MASK;
Spelling again
> + if (cc_treshold) {
> + if (cc_treshold < drvdata->ccitmin)
> + config->ccctlr = drvdata->ccitmin;
> + else
> + config->ccctlr = cc_threshold;
> + } else {
> + config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT;
> + }
Consider dropping the check against CCITMIN. There are CPUs where
CCITMIN is incorrect, e.g. see published errata 1490853 where the
value 0x100 should be 0b100 i.e. 4. On these ETMs it is possible to
set the timing threshold to four cycles instead of 256 cycles, providing
much better timing resolution. The kernel currently does not work
around this errata and uses the incorrect value of ccitmin. If you drop
the check, and trust the value provided by userspace, you allow
userspace to work around it.
Al
> }
> if (attr->config & BIT(ETM_OPT_TS)) {
> /*
> --
> 2.25.1
>
> _______________________________________________
> CoreSight mailing list -- coresight@...ts.linaro.org To unsubscribe send an email to
> coresight-leave@...ts.linaro.org
Powered by blists - more mailing lists