| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CA+rHWAJuO0D3Km+cuyG2FQX45N=q546iVF6n78RV60onqOBKsA@mail.gmail.com>
Date: Fri, 4 Aug 2023 17:14:05 +0800
From: You-Sheng Yang <vicamo.yang@...onical.com>
To: max.chou@...ltek.com
Cc: marcel@...tmann.org, johan.hedberg@...il.com, luiz.dentz@...il.com,
linux-bluetooth@...r.kernel.org, linux-kernel@...r.kernel.org,
alex_lu@...lsil.com.cn, hildawu@...ltek.com, karenhsu@...ltek.com,
kidman@...ltek.com, juerg.haefliger@...onical.com,
Riley.Kao@...l.com
Subject: Re: [PATCH] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C
By the way, what will you do to linux-firmware commit 53e48f93f
("rtl_bt: Add firmware and config files for RTL8851B")? It is also a
V2 firmware. If it's not subjected to the rename here, there will be
some V2 firmware blobs with V1 names, which may add some more troubles
in the future.
$ hexdump -C rtl_bt/rtl8851bu_fw.bin | head -n1
00000000 52 54 42 54 43 6f 72 65 41 b0 34 01 44 ba 01 00 |RTBTCoreA.4.D...|
On Fri, Aug 4, 2023 at 1:54 PM <max.chou@...ltek.com> wrote:
>
> From: Max Chou <max.chou@...ltek.com>
>
> In the commit of linux-firmware project, rtl8852cu_fw.bin is updated as
> FW v2 format[1]. Consider the case that if driver did not be updated for
> FW v2 supported[2], it can not use FW v2.
> By Canonical's suggestion, older driver should be able to load FW v1,
> so rtl8852cu_fw.bin will be revert to the previous commit as FW v1 and
> add rtl8852cu_fw_v2.bin as FW v2. This item will be started on
> linux-firmware project.
>
> In this commit, the driver prefers to load FW v2 if available. Fallback to
> FW v1 otherwise.
>
> To do on linux-firmware project.
> rtl_bt/rtl8852cu_fw.bin: FW v1 (stay at ver. 0xD7B8_FABF)
> rtl_bt/rtl8852cu_fw_v2.bin: FW v2 (to be maintained)
>
> [1]'9a24ce5e29b1 ("Bluetooth: btrtl: Firmware format v2 support")'
> [2]'55e7448533e7 ("rtl_bt: Update RTL8852C BT USB firmware
> to 0x040D_7225")'
>
> Suggested-by: Juerg Haefliger <juerg.haefliger@...onical.com>
> Tested-by: Hilda Wu <hildawu@...ltek.com>
> Signed-off-by: Max Chou <max.chou@...ltek.com>
> ---
> drivers/bluetooth/btrtl.c | 68 +++++++++++++++++++++++++--------------
> 1 file changed, 44 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
> index ddae6524106d..8bfa86dd12f7 100644
> --- a/drivers/bluetooth/btrtl.c
> +++ b/drivers/bluetooth/btrtl.c
> @@ -104,7 +104,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8723A, 0xb, 0x6, HCI_USB),
> .config_needed = false,
> .has_rom_version = false,
> - .fw_name = "rtl_bt/rtl8723a_fw.bin",
> + .fw_name = "rtl_bt/rtl8723a_fw",
> .cfg_name = NULL,
> .hw_info = "rtl8723au" },
>
> @@ -112,7 +112,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_UART),
> .config_needed = true,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723bs_fw.bin",
> + .fw_name = "rtl_bt/rtl8723bs_fw",
> .cfg_name = "rtl_bt/rtl8723bs_config",
> .hw_info = "rtl8723bs" },
>
> @@ -120,7 +120,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_USB),
> .config_needed = false,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723b_fw.bin",
> + .fw_name = "rtl_bt/rtl8723b_fw",
> .cfg_name = "rtl_bt/rtl8723b_config",
> .hw_info = "rtl8723bu" },
>
> @@ -132,7 +132,7 @@ static const struct id_table ic_id_table[] = {
> .hci_bus = HCI_UART,
> .config_needed = true,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723cs_cg_fw.bin",
> + .fw_name = "rtl_bt/rtl8723cs_cg_fw",
> .cfg_name = "rtl_bt/rtl8723cs_cg_config",
> .hw_info = "rtl8723cs-cg" },
>
> @@ -144,7 +144,7 @@ static const struct id_table ic_id_table[] = {
> .hci_bus = HCI_UART,
> .config_needed = true,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723cs_vf_fw.bin",
> + .fw_name = "rtl_bt/rtl8723cs_vf_fw",
> .cfg_name = "rtl_bt/rtl8723cs_vf_config",
> .hw_info = "rtl8723cs-vf" },
>
> @@ -156,7 +156,7 @@ static const struct id_table ic_id_table[] = {
> .hci_bus = HCI_UART,
> .config_needed = true,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723cs_xx_fw.bin",
> + .fw_name = "rtl_bt/rtl8723cs_xx_fw",
> .cfg_name = "rtl_bt/rtl8723cs_xx_config",
> .hw_info = "rtl8723cs" },
>
> @@ -164,7 +164,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_USB),
> .config_needed = true,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723d_fw.bin",
> + .fw_name = "rtl_bt/rtl8723d_fw",
> .cfg_name = "rtl_bt/rtl8723d_config",
> .hw_info = "rtl8723du" },
>
> @@ -172,7 +172,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_UART),
> .config_needed = true,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723ds_fw.bin",
> + .fw_name = "rtl_bt/rtl8723ds_fw",
> .cfg_name = "rtl_bt/rtl8723ds_config",
> .hw_info = "rtl8723ds" },
>
> @@ -180,7 +180,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8821A, 0xa, 0x6, HCI_USB),
> .config_needed = false,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8821a_fw.bin",
> + .fw_name = "rtl_bt/rtl8821a_fw",
> .cfg_name = "rtl_bt/rtl8821a_config",
> .hw_info = "rtl8821au" },
>
> @@ -189,7 +189,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8821c_fw.bin",
> + .fw_name = "rtl_bt/rtl8821c_fw",
> .cfg_name = "rtl_bt/rtl8821c_config",
> .hw_info = "rtl8821cu" },
>
> @@ -198,7 +198,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = true,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8821cs_fw.bin",
> + .fw_name = "rtl_bt/rtl8821cs_fw",
> .cfg_name = "rtl_bt/rtl8821cs_config",
> .hw_info = "rtl8821cs" },
>
> @@ -206,7 +206,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8761A, 0xa, 0x6, HCI_USB),
> .config_needed = false,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8761a_fw.bin",
> + .fw_name = "rtl_bt/rtl8761a_fw",
> .cfg_name = "rtl_bt/rtl8761a_config",
> .hw_info = "rtl8761au" },
>
> @@ -215,7 +215,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8761b_fw.bin",
> + .fw_name = "rtl_bt/rtl8761b_fw",
> .cfg_name = "rtl_bt/rtl8761b_config",
> .hw_info = "rtl8761btv" },
>
> @@ -223,7 +223,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
> .config_needed = false,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8761bu_fw.bin",
> + .fw_name = "rtl_bt/rtl8761bu_fw",
> .cfg_name = "rtl_bt/rtl8761bu_config",
> .hw_info = "rtl8761bu" },
>
> @@ -232,7 +232,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = true,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8822cs_fw.bin",
> + .fw_name = "rtl_bt/rtl8822cs_fw",
> .cfg_name = "rtl_bt/rtl8822cs_config",
> .hw_info = "rtl8822cs" },
>
> @@ -241,7 +241,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = true,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8822cs_fw.bin",
> + .fw_name = "rtl_bt/rtl8822cs_fw",
> .cfg_name = "rtl_bt/rtl8822cs_config",
> .hw_info = "rtl8822cs" },
>
> @@ -250,7 +250,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8822cu_fw.bin",
> + .fw_name = "rtl_bt/rtl8822cu_fw",
> .cfg_name = "rtl_bt/rtl8822cu_config",
> .hw_info = "rtl8822cu" },
>
> @@ -259,7 +259,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = true,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8822b_fw.bin",
> + .fw_name = "rtl_bt/rtl8822b_fw",
> .cfg_name = "rtl_bt/rtl8822b_config",
> .hw_info = "rtl8822bu" },
>
> @@ -268,7 +268,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8852au_fw.bin",
> + .fw_name = "rtl_bt/rtl8852au_fw",
> .cfg_name = "rtl_bt/rtl8852au_config",
> .hw_info = "rtl8852au" },
>
> @@ -277,7 +277,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = true,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8852bs_fw.bin",
> + .fw_name = "rtl_bt/rtl8852bs_fw",
> .cfg_name = "rtl_bt/rtl8852bs_config",
> .hw_info = "rtl8852bs" },
>
> @@ -286,7 +286,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8852bu_fw.bin",
> + .fw_name = "rtl_bt/rtl8852bu_fw",
> .cfg_name = "rtl_bt/rtl8852bu_config",
> .hw_info = "rtl8852bu" },
>
> @@ -295,7 +295,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8852cu_fw.bin",
> + .fw_name = "rtl_bt/rtl8852cu_fw",
> .cfg_name = "rtl_bt/rtl8852cu_config",
> .hw_info = "rtl8852cu" },
>
> @@ -304,7 +304,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = false,
> - .fw_name = "rtl_bt/rtl8851bu_fw.bin",
> + .fw_name = "rtl_bt/rtl8851bu_fw",
> .cfg_name = "rtl_bt/rtl8851bu_config",
> .hw_info = "rtl8851bu" },
> };
> @@ -1045,10 +1045,12 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
> struct sk_buff *skb;
> struct hci_rp_read_local_version *resp;
> struct hci_command_hdr *cmd;
> + char fw_name[40];
> char cfg_name[40];
> u16 hci_rev, lmp_subver;
> u8 hci_ver, lmp_ver, chip_type = 0;
> int ret;
> + int fw_load_retry = 0;
> u8 reg_val[2];
>
> btrtl_dev = kzalloc(sizeof(*btrtl_dev), GFP_KERNEL);
> @@ -1154,9 +1156,26 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
> goto err_free;
> }
>
> - btrtl_dev->fw_len = rtl_load_file(hdev, btrtl_dev->ic_info->fw_name,
> +fw_name_load:
> + if (btrtl_dev->ic_info->fw_name) {
> + if (lmp_subver == RTL_ROM_LMP_8852A && hci_rev == 0x000c &&
> + fw_load_retry == 0) {
> + fw_load_retry = 1;
> + snprintf(fw_name, sizeof(fw_name), "%s_v2.bin",
> + btrtl_dev->ic_info->fw_name);
> + } else {
> + fw_load_retry = 0;
> + snprintf(fw_name, sizeof(fw_name), "%s.bin",
> + btrtl_dev->ic_info->fw_name);
> + }
> + btrtl_dev->fw_len = rtl_load_file(hdev, fw_name,
> &btrtl_dev->fw_data);
> + }
> +
> if (btrtl_dev->fw_len < 0) {
> + if (fw_load_retry == 1)
> + goto fw_name_load;
> +
> rtl_dev_err(hdev, "firmware file %s not found",
> btrtl_dev->ic_info->fw_name);
> ret = btrtl_dev->fw_len;
> @@ -1491,4 +1510,5 @@ MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
> +MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw_v2.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");
> --
> 2.34.1
>
--
Regards,
You-Sheng Yang
Powered by blists - more mailing lists