Message-ID: <b31c10fd01614414b01728db4b7330ba@realtek.com>
Date:   Fri, 4 Aug 2023 10:15:59 +0000
From:   Max Chou <max.chou@...ltek.com>
To:     Linux regressions mailing list <regressions@...ts.linux.dev>,
        "marcel@...tmann.org" <marcel@...tmann.org>
CC:     "johan.hedberg@...il.com" <johan.hedberg@...il.com>,
        "luiz.dentz@...il.com" <luiz.dentz@...il.com>,
        "linux-bluetooth@...r.kernel.org" <linux-bluetooth@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "alex_lu@...lsil.com.cn" <alex_lu@...lsil.com.cn>,
        Hilda Wu <hildawu@...ltek.com>,
        Karen Hsu <karenhsu@...ltek.com>,
        KidmanLee <kidman@...ltek.com>,
        "juerg.haefliger@...onical.com" <juerg.haefliger@...onical.com>,
        "vicamo.yang@...onical.com" <vicamo.yang@...onical.com>,
        "Riley.Kao@...l.com" <Riley.Kao@...l.com>,
        "Josh Boyer" <jwboyer@...nel.org>,
        "David S. Miller" <davem@...emloft.net>,
        "Eric Dumazet" <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>
Subject: RE: [PATCH] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C

Dear All,
Please check my comment inline. Thanks.

BRs,
Max


> -----Original Message-----
> From: Linux regression tracking (Thorsten Leemhuis)
> <regressions@...mhuis.info>
> Sent: Friday, August 4, 2023 4:55 PM
> To: Max Chou <max.chou@...ltek.com>; marcel@...tmann.org
> Cc: johan.hedberg@...il.com; luiz.dentz@...il.com;
> linux-bluetooth@...r.kernel.org; linux-kernel@...r.kernel.org;
> alex_lu@...lsil.com.cn; Hilda Wu <hildawu@...ltek.com>; Karen Hsu
> <karenhsu@...ltek.com>; KidmanLee <kidman@...ltek.com>;
> juerg.haefliger@...onical.com; vicamo.yang@...onical.com;
> Riley.Kao@...l.com; Josh Boyer <jwboyer@...nel.org>; David S. Miller
> <davem@...emloft.net>; Eric Dumazet <edumazet@...gle.com>; Jakub
> Kicinski <kuba@...nel.org>; Paolo Abeni <pabeni@...hat.com>; Linux kernel
> regressions list <regressions@...ts.linux.dev>
> Subject: Re: [PATCH] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for
> RTL8852C
> 
> 
> External mail.
> 
> 
> 
> [CCing the linux-firmware maintainer, the network maintainers, and the
> regressions lists]
> 
> On 04.08.23 07:54, max.chou@...ltek.com wrote:
> > From: Max Chou <max.chou@...ltek.com>
> >
> > In the commit of linux-firmware project, rtl8852cu_fw.bin is updated
> > as FW v2 format[1]. Consider the case that if driver did not be updated fo>
> FW v2 supported[2], it can not use FW v2.
> >
> > By Canonical's suggestion, older driver should be able to load FW v1,
> 
> Well, that's not only Canonical suggestion, that is how things are supposed to
> be handled in general. See
> Documentation/driver-api/firmware/firmware-usage-guidelines.rst (alt:
> https://docs.kernel.org/driver-api/firmware/firmware-usage-guidelines.html
> ) for details.
> 
> We had a similar situation in March already with a Wifi driver:
> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/c
> ommit/?id=416a66cae796939d7d096988c72c641656c81c5a
> 
> Makes me wonder: is there a problem here we should try harder to avoid?
> Especially as the problem in this case would have been simple to predict by
> reading the changelog of the linux-firmware change. To quote from
> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/c
> ommit/?id=55e7448533e7
> 
> ```
> Note: This firmware patch needs to be used with driver
> "btrtl: Firmware format v2 support". Please update the driver with this commit:
> 9a24ce5e29b15c4c6b0c89c04f9df6ce14addefa
> ```


Actually, we thought this note is enough. If users update linux-firmware,
backport will be work.
However, the commit avoid the firmware guideline.
"At the same time updated firmware files must not cause any regressions for
users of older kernel releases."
We will revert the commit and send a new commit for rtl8852cu_fw_v2.bin




> 
> > so rtl8852cu_fw.bin will be revert to the previous commit as FW v1 and
> > add rtl8852cu_fw_v2.bin as FW v2. This item will be started on
> > linux-firmware project.
> >
> > In this commit, the driver prefers to load FW v2 if available.
> > Fallback to FW v1 otherwise.
> >
> > To do on linux-firmware project.
> > rtl_bt/rtl8852cu_fw.bin: FW v1 (stay at ver. 0xD7B8_FABF)
> > rtl_bt/rtl8852cu_fw_v2.bin: FW v2 (to be maintained)
> >
> > [1]'9a24ce5e29b1 ("Bluetooth: btrtl: Firmware format v2 support")'
> > [2]'55e7448533e7 ("rtl_bt: Update RTL8852C BT USB firmware
> >     to 0x040D_7225")'
> 
> You seem to have mixed up [1] and [2] here, or did my brain go sideways
> somewhere?

We will revert '55e7448533e7 ("rtl_bt: Update RTL8852C BT USB firmware 
to 0x040D_7225")' and add a new commit for rtl8852cu_fw_v2.bin.

> 
> > Suggested-by: Juerg Haefliger <juerg.haefliger@...onical.com>
> > Tested-by: Hilda Wu <hildawu@...ltek.com>
> 
> All that sounds like this should also have these tags to to ensure this makes it
> back too all trees that applied 9a24ce5e29b:
> 
>  Fixes: 9a24ce5e29b ("Bluetooth: btrtl: Firmware format v2 support")
>  Cc: stable@...r.kernel.org
> 

Roger that

> Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
> --
> Everything you wanna know about Linux kernel regression tracking:
> https://linux-regtracking.leemhuis.info/about/#tldr
> If I did something stupid, please tell me, as explained on that page.
> 
> > Signed-off-by: Max Chou <max.chou@...ltek.com>
> > ---
> >  drivers/bluetooth/btrtl.c | 68
> > +++++++++++++++++++++++++--------------
> >  1 file changed, 44 insertions(+), 24 deletions(-)
> >
> > diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
> > index ddae6524106d..8bfa86dd12f7 100644
> > --- a/drivers/bluetooth/btrtl.c
> > +++ b/drivers/bluetooth/btrtl.c
> > @@ -104,7 +104,7 @@ static const struct id_table ic_id_table[] = {
> >       { IC_INFO(RTL_ROM_LMP_8723A, 0xb, 0x6, HCI_USB),
> >         .config_needed = false,
> >         .has_rom_version = false,
> > -       .fw_name = "rtl_bt/rtl8723a_fw.bin",
> > +       .fw_name = "rtl_bt/rtl8723a_fw",
> >         .cfg_name = NULL,
> >         .hw_info = "rtl8723au" },
> >
> > @@ -112,7 +112,7 @@ static const struct id_table ic_id_table[] = {
> >       { IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_UART),
> >         .config_needed = true,
> >         .has_rom_version = true,
> > -       .fw_name  = "rtl_bt/rtl8723bs_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8723bs_fw",
> >         .cfg_name = "rtl_bt/rtl8723bs_config",
> >         .hw_info  = "rtl8723bs" },
> >
> > @@ -120,7 +120,7 @@ static const struct id_table ic_id_table[] = {
> >       { IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_USB),
> >         .config_needed = false,
> >         .has_rom_version = true,
> > -       .fw_name  = "rtl_bt/rtl8723b_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8723b_fw",
> >         .cfg_name = "rtl_bt/rtl8723b_config",
> >         .hw_info  = "rtl8723bu" },
> >
> > @@ -132,7 +132,7 @@ static const struct id_table ic_id_table[] = {
> >         .hci_bus = HCI_UART,
> >         .config_needed = true,
> >         .has_rom_version = true,
> > -       .fw_name  = "rtl_bt/rtl8723cs_cg_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8723cs_cg_fw",
> >         .cfg_name = "rtl_bt/rtl8723cs_cg_config",
> >         .hw_info  = "rtl8723cs-cg" },
> >
> > @@ -144,7 +144,7 @@ static const struct id_table ic_id_table[] = {
> >         .hci_bus = HCI_UART,
> >         .config_needed = true,
> >         .has_rom_version = true,
> > -       .fw_name  = "rtl_bt/rtl8723cs_vf_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8723cs_vf_fw",
> >         .cfg_name = "rtl_bt/rtl8723cs_vf_config",
> >         .hw_info  = "rtl8723cs-vf" },
> >
> > @@ -156,7 +156,7 @@ static const struct id_table ic_id_table[] = {
> >         .hci_bus = HCI_UART,
> >         .config_needed = true,
> >         .has_rom_version = true,
> > -       .fw_name  = "rtl_bt/rtl8723cs_xx_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8723cs_xx_fw",
> >         .cfg_name = "rtl_bt/rtl8723cs_xx_config",
> >         .hw_info  = "rtl8723cs" },
> >
> > @@ -164,7 +164,7 @@ static const struct id_table ic_id_table[] = {
> >       { IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_USB),
> >         .config_needed = true,
> >         .has_rom_version = true,
> > -       .fw_name  = "rtl_bt/rtl8723d_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8723d_fw",
> >         .cfg_name = "rtl_bt/rtl8723d_config",
> >         .hw_info  = "rtl8723du" },
> >
> > @@ -172,7 +172,7 @@ static const struct id_table ic_id_table[] = {
> >       { IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_UART),
> >         .config_needed = true,
> >         .has_rom_version = true,
> > -       .fw_name  = "rtl_bt/rtl8723ds_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8723ds_fw",
> >         .cfg_name = "rtl_bt/rtl8723ds_config",
> >         .hw_info  = "rtl8723ds" },
> >
> > @@ -180,7 +180,7 @@ static const struct id_table ic_id_table[] = {
> >       { IC_INFO(RTL_ROM_LMP_8821A, 0xa, 0x6, HCI_USB),
> >         .config_needed = false,
> >         .has_rom_version = true,
> > -       .fw_name  = "rtl_bt/rtl8821a_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8821a_fw",
> >         .cfg_name = "rtl_bt/rtl8821a_config",
> >         .hw_info  = "rtl8821au" },
> >
> > @@ -189,7 +189,7 @@ static const struct id_table ic_id_table[] = {
> >         .config_needed = false,
> >         .has_rom_version = true,
> >         .has_msft_ext = true,
> > -       .fw_name  = "rtl_bt/rtl8821c_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8821c_fw",
> >         .cfg_name = "rtl_bt/rtl8821c_config",
> >         .hw_info  = "rtl8821cu" },
> >
> > @@ -198,7 +198,7 @@ static const struct id_table ic_id_table[] = {
> >         .config_needed = true,
> >         .has_rom_version = true,
> >         .has_msft_ext = true,
> > -       .fw_name  = "rtl_bt/rtl8821cs_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8821cs_fw",
> >         .cfg_name = "rtl_bt/rtl8821cs_config",
> >         .hw_info  = "rtl8821cs" },
> >
> > @@ -206,7 +206,7 @@ static const struct id_table ic_id_table[] = {
> >       { IC_INFO(RTL_ROM_LMP_8761A, 0xa, 0x6, HCI_USB),
> >         .config_needed = false,
> >         .has_rom_version = true,
> > -       .fw_name  = "rtl_bt/rtl8761a_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8761a_fw",
> >         .cfg_name = "rtl_bt/rtl8761a_config",
> >         .hw_info  = "rtl8761au" },
> >
> > @@ -215,7 +215,7 @@ static const struct id_table ic_id_table[] = {
> >         .config_needed = false,
> >         .has_rom_version = true,
> >         .has_msft_ext = true,
> > -       .fw_name  = "rtl_bt/rtl8761b_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8761b_fw",
> >         .cfg_name = "rtl_bt/rtl8761b_config",
> >         .hw_info  = "rtl8761btv" },
> >
> > @@ -223,7 +223,7 @@ static const struct id_table ic_id_table[] = {
> >       { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
> >         .config_needed = false,
> >         .has_rom_version = true,
> > -       .fw_name  = "rtl_bt/rtl8761bu_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8761bu_fw",
> >         .cfg_name = "rtl_bt/rtl8761bu_config",
> >         .hw_info  = "rtl8761bu" },
> >
> > @@ -232,7 +232,7 @@ static const struct id_table ic_id_table[] = {
> >         .config_needed = true,
> >         .has_rom_version = true,
> >         .has_msft_ext = true,
> > -       .fw_name  = "rtl_bt/rtl8822cs_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8822cs_fw",
> >         .cfg_name = "rtl_bt/rtl8822cs_config",
> >         .hw_info  = "rtl8822cs" },
> >
> > @@ -241,7 +241,7 @@ static const struct id_table ic_id_table[] = {
> >         .config_needed = true,
> >         .has_rom_version = true,
> >         .has_msft_ext = true,
> > -       .fw_name  = "rtl_bt/rtl8822cs_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8822cs_fw",
> >         .cfg_name = "rtl_bt/rtl8822cs_config",
> >         .hw_info  = "rtl8822cs" },
> >
> > @@ -250,7 +250,7 @@ static const struct id_table ic_id_table[] = {
> >         .config_needed = false,
> >         .has_rom_version = true,
> >         .has_msft_ext = true,
> > -       .fw_name  = "rtl_bt/rtl8822cu_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8822cu_fw",
> >         .cfg_name = "rtl_bt/rtl8822cu_config",
> >         .hw_info  = "rtl8822cu" },
> >
> > @@ -259,7 +259,7 @@ static const struct id_table ic_id_table[] = {
> >         .config_needed = true,
> >         .has_rom_version = true,
> >         .has_msft_ext = true,
> > -       .fw_name  = "rtl_bt/rtl8822b_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8822b_fw",
> >         .cfg_name = "rtl_bt/rtl8822b_config",
> >         .hw_info  = "rtl8822bu" },
> >
> > @@ -268,7 +268,7 @@ static const struct id_table ic_id_table[] = {
> >         .config_needed = false,
> >         .has_rom_version = true,
> >         .has_msft_ext = true,
> > -       .fw_name  = "rtl_bt/rtl8852au_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8852au_fw",
> >         .cfg_name = "rtl_bt/rtl8852au_config",
> >         .hw_info  = "rtl8852au" },
> >
> > @@ -277,7 +277,7 @@ static const struct id_table ic_id_table[] = {
> >         .config_needed = true,
> >         .has_rom_version = true,
> >         .has_msft_ext = true,
> > -       .fw_name  = "rtl_bt/rtl8852bs_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8852bs_fw",
> >         .cfg_name = "rtl_bt/rtl8852bs_config",
> >         .hw_info  = "rtl8852bs" },
> >
> > @@ -286,7 +286,7 @@ static const struct id_table ic_id_table[] = {
> >         .config_needed = false,
> >         .has_rom_version = true,
> >         .has_msft_ext = true,
> > -       .fw_name  = "rtl_bt/rtl8852bu_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8852bu_fw",
> >         .cfg_name = "rtl_bt/rtl8852bu_config",
> >         .hw_info  = "rtl8852bu" },
> >
> > @@ -295,7 +295,7 @@ static const struct id_table ic_id_table[] = {
> >         .config_needed = false,
> >         .has_rom_version = true,
> >         .has_msft_ext = true,
> > -       .fw_name  = "rtl_bt/rtl8852cu_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8852cu_fw",
> >         .cfg_name = "rtl_bt/rtl8852cu_config",
> >         .hw_info  = "rtl8852cu" },
> >
> > @@ -304,7 +304,7 @@ static const struct id_table ic_id_table[] = {
> >         .config_needed = false,
> >         .has_rom_version = true,
> >         .has_msft_ext = false,
> > -       .fw_name  = "rtl_bt/rtl8851bu_fw.bin",
> > +       .fw_name  = "rtl_bt/rtl8851bu_fw",
> >         .cfg_name = "rtl_bt/rtl8851bu_config",
> >         .hw_info  = "rtl8851bu" },
> >       };
> > @@ -1045,10 +1045,12 @@ struct btrtl_device_info *btrtl_initialize(struct
> hci_dev *hdev,
> >       struct sk_buff *skb;
> >       struct hci_rp_read_local_version *resp;
> >       struct hci_command_hdr *cmd;
> > +     char fw_name[40];
> >       char cfg_name[40];
> >       u16 hci_rev, lmp_subver;
> >       u8 hci_ver, lmp_ver, chip_type = 0;
> >       int ret;
> > +     int fw_load_retry = 0;
> >       u8 reg_val[2];
> >
> >       btrtl_dev = kzalloc(sizeof(*btrtl_dev), GFP_KERNEL); @@ -1154,9
> > +1156,26 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
> >                       goto err_free;
> >       }
> >
> > -     btrtl_dev->fw_len = rtl_load_file(hdev, btrtl_dev->ic_info->fw_name,
> > +fw_name_load:
> > +     if (btrtl_dev->ic_info->fw_name) {
> > +             if (lmp_subver == RTL_ROM_LMP_8852A && hci_rev ==
> 0x000c &&
> > +                               fw_load_retry == 0) {
> > +                     fw_load_retry = 1;
> > +                     snprintf(fw_name, sizeof(fw_name), "%s_v2.bin",
> > +                              btrtl_dev->ic_info->fw_name);
> > +             } else {
> > +                     fw_load_retry = 0;
> > +                     snprintf(fw_name, sizeof(fw_name), "%s.bin",
> > +                              btrtl_dev->ic_info->fw_name);
> > +             }
> > +             btrtl_dev->fw_len = rtl_load_file(hdev, fw_name,
> >                                         &btrtl_dev->fw_data);
> > +     }
> > +
> >       if (btrtl_dev->fw_len < 0) {
> > +             if (fw_load_retry == 1)
> > +                     goto fw_name_load;
> > +
> >               rtl_dev_err(hdev, "firmware file %s not found",
> >                           btrtl_dev->ic_info->fw_name);
> >               ret = btrtl_dev->fw_len; @@ -1491,4 +1510,5 @@
> > MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin");
> >  MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
> >  MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
> >  MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
> > +MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw_v2.bin");
> >  MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");

Powered by blists - more mailing lists