| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230804115037.754994-2-d-gole@ti.com>
Date: Fri, 4 Aug 2023 17:20:34 +0530
From: Dhruva Gole <d-gole@...com>
To: Nishanth Menon <nm@...com>, Tero Kristo <kristo@...nel.org>,
"Santosh Shilimkar" <ssantosh@...nel.org>
CC: <linux-pm@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-omap@...r.kernel.org>,
"Kevin Hilman" <khilman@...libre.com>, Vignesh R <vigneshr@...com>,
Dave Gerlach <d-gerlach@...com>, Dhruva Gole <d-gole@...com>
Subject: [PATCH V7 1/4] firmware: ti_sci: Introduce Power Management Ops
From: Dave Gerlach <d-gerlach@...com>
Introduce TISCI_MSG_PREPARE_SLEEP power management op supported by the
TISCI Low Power Mode API [1]. This message is currently supported only on
AM62x platforms.
It can prepare the SOC for entering into a low power mode and
provide details to firmware about the state being entered.
While at it, update the Copyright date as well for ti_sci
[1] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/pm/lpm.html
Signed-off-by: Dave Gerlach <d-gerlach@...com>
Signed-off-by: Dhruva Gole <d-gole@...com>
---
drivers/firmware/ti_sci.c | 64 +++++++++++++++++++++++++-
drivers/firmware/ti_sci.h | 30 +++++++++++-
include/linux/soc/ti/ti_sci_protocol.h | 15 ++++++
3 files changed, 107 insertions(+), 2 deletions(-)
diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index 26a37f47f4ca..fc35d78b7e42 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -2,7 +2,7 @@
/*
* Texas Instruments System Control Interface Protocol Driver
*
- * Copyright (C) 2015-2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2015-2023 Texas Instruments Incorporated - https://www.ti.com/
* Nishanth Menon
*/
@@ -1664,6 +1664,65 @@ static int ti_sci_cmd_clk_get_freq(const struct ti_sci_handle *handle,
return ret;
}
+/**
+ * ti_sci_cmd_prepare_sleep() - Prepare system for system suspend
+ * @handle: pointer to TI SCI handle
+ * @mode: Device identifier
+ * @ctx_lo: Low part of address for context save
+ * @ctx_hi: High part of address for context save
+ * @debug_flags: Debug flags to pass to firmware
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_prepare_sleep(const struct ti_sci_handle *handle, u8 mode,
+ u32 ctx_lo, u32 ctx_hi, u32 debug_flags)
+{
+ struct ti_sci_info *info;
+ struct ti_sci_msg_req_prepare_sleep *req;
+ struct ti_sci_msg_hdr *resp;
+ struct ti_sci_xfer *xfer;
+ struct device *dev;
+ int ret = 0;
+
+ if (IS_ERR(handle))
+ return PTR_ERR(handle);
+ if (!handle)
+ return -EINVAL;
+
+ info = handle_to_ti_sci_info(handle);
+ dev = info->dev;
+
+ xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_PREPARE_SLEEP,
+ TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+ sizeof(*req), sizeof(*resp));
+ if (IS_ERR(xfer)) {
+ ret = PTR_ERR(xfer);
+ dev_err(dev, "Message alloc failed(%d)\n", ret);
+ return ret;
+ }
+
+ req = (struct ti_sci_msg_req_prepare_sleep *)xfer->xfer_buf;
+ req->mode = mode;
+ req->ctx_lo = ctx_lo;
+ req->ctx_hi = ctx_hi;
+ req->debug_flags = debug_flags;
+
+ ret = ti_sci_do_xfer(info, xfer);
+ if (ret) {
+ dev_err(dev, "Mbox send fail %d\n", ret);
+ goto fail;
+ }
+
+ resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+
+ ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+ ti_sci_put_one_xfer(&info->minfo, xfer);
+
+ return ret;
+}
+
static int ti_sci_cmd_core_reboot(const struct ti_sci_handle *handle)
{
struct ti_sci_info *info;
@@ -2806,6 +2865,7 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
struct ti_sci_core_ops *core_ops = &ops->core_ops;
struct ti_sci_dev_ops *dops = &ops->dev_ops;
struct ti_sci_clk_ops *cops = &ops->clk_ops;
+ struct ti_sci_pm_ops *pmops = &ops->pm_ops;
struct ti_sci_rm_core_ops *rm_core_ops = &ops->rm_core_ops;
struct ti_sci_rm_irq_ops *iops = &ops->rm_irq_ops;
struct ti_sci_rm_ringacc_ops *rops = &ops->rm_ring_ops;
@@ -2845,6 +2905,8 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
cops->set_freq = ti_sci_cmd_clk_set_freq;
cops->get_freq = ti_sci_cmd_clk_get_freq;
+ pmops->prepare_sleep = ti_sci_cmd_prepare_sleep;
+
rm_core_ops->get_range = ti_sci_cmd_get_resource_range;
rm_core_ops->get_range_from_shost =
ti_sci_cmd_get_resource_range_from_shost;
diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h
index ef3a8214d002..9c9b4dae9521 100644
--- a/drivers/firmware/ti_sci.h
+++ b/drivers/firmware/ti_sci.h
@@ -6,7 +6,7 @@
* The system works in a message response protocol
* See: http://processors.wiki.ti.com/index.php/TISCI for details
*
- * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2015-2023 Texas Instruments Incorporated - https://www.ti.com/
*/
#ifndef __TI_SCI_H
@@ -35,6 +35,9 @@
#define TI_SCI_MSG_QUERY_CLOCK_FREQ 0x010d
#define TI_SCI_MSG_GET_CLOCK_FREQ 0x010e
+/* Low Power Mode Requests */
+#define TI_SCI_MSG_PREPARE_SLEEP 0x0300
+
/* Resource Management Requests */
#define TI_SCI_MSG_GET_RESOURCE_RANGE 0x1500
@@ -545,6 +548,31 @@ struct ti_sci_msg_resp_get_clock_freq {
u64 freq_hz;
} __packed;
+#define TISCI_MSG_VALUE_SLEEP_MODE_DEEP_SLEEP 0x0
+
+/**
+ * struct tisci_msg_prepare_sleep_req - Request for TISCI_MSG_PREPARE_SLEEP.
+ *
+ * @hdr TISCI header to provide ACK/NAK flags to the host.
+ * @mode Low power mode to enter.
+ * @ctx_lo Low 32-bits of physical pointer to address to use for context save.
+ * @ctx_hi High 32-bits of physical pointer to address to use for context save.
+ * @debug_flags Flags that can be set to halt the sequence during suspend or
+ * resume to allow JTAG connection and debug.
+ *
+ * This message is used as the first step of entering a low power mode. It
+ * allows configurable information, including which state to enter to be
+ * easily shared from the application, as this is a non-secure message and
+ * therefore can be sent by anyone.
+ */
+struct ti_sci_msg_req_prepare_sleep {
+ struct ti_sci_msg_hdr hdr;
+ u8 mode;
+ u32 ctx_lo;
+ u32 ctx_hi;
+ u32 debug_flags;
+} __packed;
+
#define TI_SCI_IRQ_SECONDARY_HOST_INVALID 0xff
/**
diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h
index bd0d11af76c5..566e442b6a43 100644
--- a/include/linux/soc/ti/ti_sci_protocol.h
+++ b/include/linux/soc/ti/ti_sci_protocol.h
@@ -195,6 +195,20 @@ struct ti_sci_clk_ops {
u64 *current_freq);
};
+/**
+ * struct ti_sci_pm_ops - Low Power Mode (LPM) control operations
+ * @prepare_sleep: Prepare to enter low power mode
+ * - mode: Low power mode to enter.
+ * - ctx_lo: Low 32-bits of physical address for context save.
+ * - ctx_hi: High 32-bits of physical address for context save.
+ * - ctx_lo: 'true' if frequency change is desired.
+ * - debug_flags: JTAG control flags for debug.
+ */
+struct ti_sci_pm_ops {
+ int (*prepare_sleep)(const struct ti_sci_handle *handle, u8 mode,
+ u32 ctx_lo, u32 ctx_hi, u32 flags);
+};
+
/**
* struct ti_sci_resource_desc - Description of TI SCI resource instance range.
* @start: Start index of the first resource range.
@@ -539,6 +553,7 @@ struct ti_sci_ops {
struct ti_sci_core_ops core_ops;
struct ti_sci_dev_ops dev_ops;
struct ti_sci_clk_ops clk_ops;
+ struct ti_sci_pm_ops pm_ops;
struct ti_sci_rm_core_ops rm_core_ops;
struct ti_sci_rm_irq_ops rm_irq_ops;
struct ti_sci_rm_ringacc_ops rm_ring_ops;
--
2.34.1
Powered by blists - more mailing lists