| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230806-pll-mipi_set_rate_parent-v5-0-db4f5ca33fc3@oltmanns.dev>
Date: Sun, 06 Aug 2023 15:06:45 +0200
From: Frank Oltmanns <frank@...manns.dev>
To: Maxime Ripard <mripard@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Samuel Holland <samuel@...lland.org>,
Andre Przywara <andre.przywara@....com>,
Roman Beranek <me@...y.cz>
Cc: linux-clk@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-sunxi@...ts.linux.dev, linux-kernel@...r.kernel.org,
Frank Oltmanns <frank@...manns.dev>
Subject: [PATCH v5 00/11] clk: sunxi-ng: Consider alternative parent rates
when determining NKM clock rate
This patchset enables NKM clocks to consider alternative parent rates
and utilize this new feature to adjust the pll-video0 clock on Allwinner
A64.
Furthermore, with this patchset pll-video0 considers rates that are
higher than the requested rate when finding the closest rate. In
consequence, higher rates are also considered by pll-video0's
descandents. In total, after applying this patchset, finding the closest
rate is supported by:
- ccu_nm
- ccu_nkm
- ccu_mux
- ccu_div
This allows us to achieve an optimal rate for driving the board's panel.
To provide some context, the clock structure involved in this process is
as follows:
clock clock type
--------------------------------------
pll-video0 ccu_nm
pll-mipi ccu_nkm
tcon0 ccu_mux
tcon-data-clock sun4i_dclk
The divider between tcon0 and tcon-data-clock is fixed at 4. Therefore,
in order to achieve a rate that closely matches the desired rate of the
panel, pll-mipi needs to operate at a specific rate.
Tests
=====
So far, this has been successfully tested on the A64-based Pinephone
using three different panel rates:
1. A panel rate that can be matched exactly by pll-video0.
2. A panel rate that requires pll-video0 to undershoot to get the
closest rate.
3. A panel rate that requires pll-video0 to overshoot to get the
closest rate.
Test records:
Re 1:
-----
Panel requests tcon-data-clock of 103500000 Hz, i.e., pll-mipi needs to
run at 414000000 Hz. This results in the following clock rates:
clock rate
-------------------------------------
pll-video0 207000000
hdmi-phy-clk 51750000
hdmi 207000000
tcon1 207000000
pll-mipi 414000000
tcon0 414000000
tcon-data-clock 103500000
The results of the find_best calls:
ccu_nkm_find_best_with_parent_adj: rate=414000000, best_rate=414000000, best_parent_rate=207000000, n=1, k=2, m=1
ccu_nkm_find_best_with_parent_adj: rate=414000000, best_rate=414000000, best_parent_rate=207000000, n=1, k=2, m=1
ccu_nkm_find_best_with_parent_adj: rate=414000000, best_rate=414000000, best_parent_rate=207000000, n=1, k=2, m=1
ccu_nkm_find_best_with_parent_adj: rate=414000000, best_rate=414000000, best_parent_rate=207000000, n=1, k=2, m=1
ccu_nkm_find_best: rate=414000000, best_rate=414000000, parent_rate=207000000, n=1, k=2, m=1
Re 2:
-----
Panel requests tcon-data-clock of 103650000 Hz, i.e., pll-mipi needs to
run at 414600000 Hz. This results in the following clock rates:
clock rate
-------------------------------------
pll-video0 282666666
hdmi-phy-clk 70666666
hdmi 282666666
tcon1 282666666
pll-mipi 414577776
tcon0 414577776
tcon-data-clock 103644444
The results of the find_best calls:
ccu_nkm_find_best_with_parent_adj: rate=414600000, best_rate=414577776, best_parent_rate=282666666, n=11, k=2, m=15
ccu_nkm_find_best_with_parent_adj: rate=414600000, best_rate=414577776, best_parent_rate=282666666, n=11, k=2, m=15
ccu_nkm_find_best_with_parent_adj: rate=414577776, best_rate=414577776, best_parent_rate=282666666, n=11, k=2, m=15
ccu_nkm_find_best_with_parent_adj: rate=414577776, best_rate=414577776, best_parent_rate=282666666, n=11, k=2, m=15
ccu_nkm_find_best: rate=414577776, best_rate=414577776, parent_rate=282666666, n=11, k=2, m=15
Re 3:
-----
Panel requests tcon-data-clock of 112266000 Hz, i.e., pll-mipi needs to
run at 449064000 Hz. This results in the following clock rates:
clock rate
-------------------------------------
pll-video0 207272727
hdmi-phy-clk 51818181
hdmi 207272727
tcon1 207272727
pll-mipi 449090908
tcon0 449090908
tcon-data-clock 112272727
The results of the find_best calls:
ccu_nkm_find_best_with_parent_adj: rate=449064000, best_rate=449090908, best_parent_rate=207272727, n=13, k=2, m=12
ccu_nkm_find_best_with_parent_adj: rate=449064000, best_rate=449090908, best_parent_rate=207272727, n=13, k=2, m=12
ccu_nkm_find_best_with_parent_adj: rate=449090908, best_rate=449090908, best_parent_rate=207272727, n=13, k=2, m=12
ccu_nkm_find_best_with_parent_adj: rate=449090908, best_rate=449090908, best_parent_rate=207272727, n=13, k=2, m=12
ccu_nkm_find_best: rate=449090908, best_rate=449090908, parent_rate=207272727, n=13, k=2, m=12
Changelog:
----------
Changes in v5:
- Remove the dedicated function for calculating the optimal parent rate
for nkm clocks that was introduced in v2 and again in v4. Instead use
a simple calculation and require the parent clock to select the
closest rate to achieve optimal results.
- Change the order of parameters of nkm_best_rate and
nkm_best_rate_with_parent_adj as requested my Maxime Ripard.
- Prefer to not reset the rate of the nkm clock's parent if the ideal
rate can be reached using the parent's current rate, copying the
behavior of ccu_mp.
- Link to v4: https://lore.kernel.org/r/20230717-pll-mipi_set_rate_parent-v4-0-04acf1d39765@oltmanns.dev
Changes in v4:
- Re-introduce a dedicated function for calculating the optimal parent
rate for nkm clocks that was introduced in v2 and removed in v3. It
turned out that not having this functionality introduces a bug when
the parent does not support finding the closest rate:
https://lore.kernel.org/all/87pm4xg2ub.fsf@oltmanns.dev/
- Incorporate review remarks:
- Correcting the parameter name for ccu_nkm_round_rate()'s parent HW
is now in a separate patch.
- Use correct parameter order in ccu_nkm_find_best_with_parent_adj.
- Add ccu_is_better_rate() and use it for determining the best rate
for nm and nkm, as well as ccu_mux_helper_determine_rate.
- Consistently introduce new macros for clock variants that support
finding the closest rate instead of updating existing macros.
- Use wrapper function for determining a ccu_mux's rate in order to
support finding the closest rate.
- Link to v3: https://lore.kernel.org/r/20230702-pll-mipi_set_rate_parent-v3-0-46dcb8aa9cbc@oltmanns.dev
Changes in v3:
- Use dedicated function for finding the best rate in cases where an
nkm clock supports setting its parent's rate, streamlining it with
the structure that is used in other sunxi-ng ccus such as ccu_mp
(PATCH 1).
- Therefore, remove the now obsolete comments that were introduced in
v2 (PATCH 1).
- Remove the dedicated function for calculating the optimal parent rate
for nkm clocks that was introduced in v2. Instead use a simple
calculation and require the parent clock to select the closest rate to
achieve optimal results (PATCH 1).
- Therefore, add support to set the closest rate for nm clocks (because
pll-mipi's parent pll-video0 is an nm clock) and all clock types that
are descendants of a64's pll-video0, i.e., nkm, mux, and div (PATCH 3
et. seq.).
- Link to v2: https://lore.kernel.org/all/20230611090143.132257-1-frank@oltmanns.dev/
Changes in V2:
- Move optimal parent rate calculation to dedicated function
- Choose a parent rate that does not to overshoot requested rate
- Add comments to ccu_nkm_find_best
- Make sure that best_parent_rate stays at original parent rate in the unlikely
case that all combinations overshoot.
Link to V1:
https://lore.kernel.org/lkml/20230605190745.366882-1-frank@oltmanns.dev/
---
Frank Oltmanns (11):
clk: sunxi-ng: nkm: Use correct parameter name for parent HW
clk: sunxi-ng: nkm: consider alternative parent rates when determining rate
clk: sunxi-ng: a64: allow pll-mipi to set parent's rate
clk: sunxi-ng: Add feature to find closest rate
clk: sunxi-ng: Add helper function to find closest rate
clk: sunxi-ng: nm: Support finding closest rate
clk: sunxi-ng: nkm: Support finding closest rate
clk: sunxi-ng: mux: Support finding closest rate
clk: sunxi-ng: div: Support finding closest rate
clk: sunxi-ng: a64: select closest rate for pll-video0
clk: sunxi-ng: nkm: Prefer current parent rate
drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 36 ++++++++++------------
drivers/clk/sunxi-ng/ccu_common.c | 12 ++++++++
drivers/clk/sunxi-ng/ccu_common.h | 6 ++++
drivers/clk/sunxi-ng/ccu_div.h | 30 +++++++++++++++++++
drivers/clk/sunxi-ng/ccu_mux.c | 15 ++++++++--
drivers/clk/sunxi-ng/ccu_mux.h | 38 +++++++++++++++++-------
drivers/clk/sunxi-ng/ccu_nkm.c | 56 ++++++++++++++++++++++++++++++-----
drivers/clk/sunxi-ng/ccu_nm.c | 13 ++++----
drivers/clk/sunxi-ng/ccu_nm.h | 48 ++++++++++++++++++++++++++++--
9 files changed, 203 insertions(+), 51 deletions(-)
---
base-commit: 6995e2de6891c724bfeb2db33d7b87775f913ad1
change-id: 20230626-pll-mipi_set_rate_parent-3363fc0d6e6f
Best regards,
--
Frank Oltmanns <frank@...manns.dev>
Powered by blists - more mailing lists