[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CANAwSgTBmLKknkWDUyZ2Byr15Oy6jbNxEYYjKGNr=2cOn5Wowg@mail.gmail.com>
Date: Sun, 6 Aug 2023 09:33:14 +0530
From: Anand Moon <linux.amoon@...il.com>
To: Ben Wolsieffer <benwolsieffer@...il.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Neil Armstrong <neil.armstrong@...aro.org>,
Kevin Hilman <khilman@...libre.com>,
Jerome Brunet <jbrunet@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
linux-amlogic@...ts.infradead.org,
Matthias Kaehlcke <mka@...omium.org>,
Alexander Stein <alexander.stein@...tq-group.com>,
Johan Hovold <johan@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 3/9] arm64: dts: amlogic: Used onboard usb hub reset on
odroid c2
Hi Ben,
On Sun, 6 Aug 2023 at 05:35, Ben Wolsieffer <benwolsieffer@...il.com> wrote:
>
> On Sat, Aug 05, 2023 at 11:30:21PM +0200, Krzysztof Kozlowski wrote:
> > On 02/08/2023 23:06, Ben Wolsieffer wrote:
> > >
> > > Hello,
> > >
> > > This patch breaks USB support on the ODROID-C2. As soon as the
> > > onboard_usb_hub module is loaded, all USB devices disconnect.
> > > Blacklisting onboard_usb_hub makes USB work as expected.
> > >
> > > I tried to reproduce the problem by manually toggling the reset line,
> > > but the problem seems to be specific to this driver. When reset is
> > > asserted manually, the devices disconnect, but they all enumerate again
> > > as soon as reset is released.
> > >
> > > Also, I have been unable to make USB work again (until the next reboot)
> > > even after unloading onboard_usb_hub.
> >
> > Wasn't this patch made exactly to fix USB support, not break it? I might
> > be missing something but maybe this was not tested at all?
> >
> > Best regards,
> > Krzysztof
> >
>
> I have been using USB on the ODROID-C2 for several years without issues.
> It looks to me that this patch was designed to make reset control for
> the hub more elegant, rather than fix a specific issue. The same change
> was applied to several devices, so it seems plausible that it was not
> tested on all of them.
>
We tried to fix quite a few issues in the past but still, we could not
resolve core issues.
Will try to resolve these issues in the future.
I have tested these changes at my end on Odroid C1+, Odroid C2, and Odroid C4,
> Thanks, Ben
Thanks
-Anand
Powered by blists - more mailing lists