lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <325df39c-8c98-1719-8460-7d9ff7bca549@ti.com>
Date:   Mon, 7 Aug 2023 11:04:04 +0530
From:   Dhruva Gole <d-gole@...com>
To:     Andrew Davis <afd@...com>, Nishanth Menon <nm@...com>,
        Vignesh Raghavendra <vigneshr@...com>,
        Tero Kristo <kristo@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        <linux-arm-kernel@...ts.infradead.org>
CC:     <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 08/13] arm64: dts: ti: k3-j721e: Enable GPIO nodes at the
 board level



On 03/08/23 02:23, Andrew Davis wrote:
> GPIO nodes defined in the top-level J721e SoC dtsi files are incomplete
> and may not be functional unless they are extended with pinmux and
> device information.
> 
> Disable the GPIO nodes in the dtsi files and only enable the ones that
> are actually pinned out on a given board.
> 
> Signed-off-by: Andrew Davis <afd@...com>
> ---
>   .../boot/dts/ti/k3-j721e-beagleboneai64.dts   | 42 ++++---------------
>   .../dts/ti/k3-j721e-common-proc-board.dts     | 35 ++++------------
>   arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     |  8 ++++
>   .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |  2 +
>   arch/arm64/boot/dts/ti/k3-j721e-sk.dts        | 31 +++-----------
>   5 files changed, 31 insertions(+), 87 deletions(-)
> 

Reviewed-by: Dhruva Gole <d-gole@...com>

> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
> index 0b89977351c98..99536765939d9 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
> @@ -647,52 +647,24 @@ eeprom@50 {
>   	};
>   };
>   
> -&main_gpio2 {
> -	/* Unused */
> -	status = "disabled";
> -};
> -
> -&main_gpio3 {
> -	/* Unused */
> -	status = "disabled";
> -};
> -
> -&main_gpio4 {
> -	/* Unused */
> -	status = "disabled";
> -};
> -
> -&main_gpio5 {
> -	/* Unused */
> -	status = "disabled";
> -};
> -
> -&main_gpio6 {
> -	/* Unused */
> -	status = "disabled";
> -};
> -
> -&main_gpio7 {
> -	/* Unused */
> -	status = "disabled";
> -};
> -
>   &wkup_gpio0 {
> +	status = "okay";
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&mcu_adc0_pins_default>, <&mcu_adc1_pins_default>,
>   		    <&mikro_bus_pins_default>;
>   };
>   
> -&wkup_gpio1 {
> -	/* Unused */
> -	status = "disabled";
> -};
> -
>   &main_gpio0 {
> +	status = "okay";
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&csi1_gpio_pins_default>, <&csi0_gpio_pins_default>;
>   };
>   
> +&main_gpio1 {
> +	status = "okay";
> +	/* default pins */
> +};
> +
>   &usb_serdes_mux {
>   	idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */
>   };
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> index e9b84d2c64b26..2fd940893eb5f 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> @@ -469,37 +469,20 @@ &main_uart4 {
>   	pinctrl-0 = <&main_uart4_pins_default>;
>   };
>   
> -&main_gpio2 {
> -	status = "disabled";
> -};
> -
> -&main_gpio3 {
> -	status = "disabled";
> -};
> -
> -&main_gpio4 {
> -	status = "disabled";
> -};
> -
> -&main_gpio5 {
> -	status = "disabled";
> -};
> -
> -&main_gpio6 {
> -	status = "disabled";
> -};
> -
> -&main_gpio7 {
> -	status = "disabled";
> -};
> -
>   &wkup_gpio0 {
> +	status = "okay";
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&wkup_gpio_pins_default>;
>   };
>   
> -&wkup_gpio1 {
> -	status = "disabled";
> +&main_gpio0 {
> +	status = "okay";
> +	/* default pins */
> +};
> +
> +&main_gpio1 {
> +	status = "okay";
> +	/* default pins */
>   };
>   
>   &main_sdhci0 {
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> index 0ca31186b9b74..7f663d9280b57 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> @@ -1339,6 +1339,7 @@ main_gpio0: gpio@...000 {
>   		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
>   		clocks = <&k3_clks 105 0>;
>   		clock-names = "gpio";
> +		status = "disabled";
>   	};
>   
>   	main_gpio1: gpio@...000 {
> @@ -1355,6 +1356,7 @@ main_gpio1: gpio@...000 {
>   		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
>   		clocks = <&k3_clks 106 0>;
>   		clock-names = "gpio";
> +		status = "disabled";
>   	};
>   
>   	main_gpio2: gpio@...000 {
> @@ -1372,6 +1374,7 @@ main_gpio2: gpio@...000 {
>   		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
>   		clocks = <&k3_clks 107 0>;
>   		clock-names = "gpio";
> +		status = "disabled";
>   	};
>   
>   	main_gpio3: gpio@...000 {
> @@ -1388,6 +1391,7 @@ main_gpio3: gpio@...000 {
>   		power-domains = <&k3_pds 108 TI_SCI_PD_EXCLUSIVE>;
>   		clocks = <&k3_clks 108 0>;
>   		clock-names = "gpio";
> +		status = "disabled";
>   	};
>   
>   	main_gpio4: gpio@...000 {
> @@ -1405,6 +1409,7 @@ main_gpio4: gpio@...000 {
>   		power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
>   		clocks = <&k3_clks 109 0>;
>   		clock-names = "gpio";
> +		status = "disabled";
>   	};
>   
>   	main_gpio5: gpio@...000 {
> @@ -1421,6 +1426,7 @@ main_gpio5: gpio@...000 {
>   		power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
>   		clocks = <&k3_clks 110 0>;
>   		clock-names = "gpio";
> +		status = "disabled";
>   	};
>   
>   	main_gpio6: gpio@...000 {
> @@ -1438,6 +1444,7 @@ main_gpio6: gpio@...000 {
>   		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
>   		clocks = <&k3_clks 111 0>;
>   		clock-names = "gpio";
> +		status = "disabled";
>   	};
>   
>   	main_gpio7: gpio@...000 {
> @@ -1454,6 +1461,7 @@ main_gpio7: gpio@...000 {
>   		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
>   		clocks = <&k3_clks 112 0>;
>   		clock-names = "gpio";
> +		status = "disabled";
>   	};
>   
>   	main_sdhci0: mmc@...0000 {
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> index 0c01bdd9656f1..4d107eee9b341 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> @@ -281,6 +281,7 @@ wkup_gpio0: gpio@...10000 {
>   		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
>   		clocks = <&k3_clks 113 0>;
>   		clock-names = "gpio";
> +		status = "disabled";
>   	};
>   
>   	wkup_gpio1: gpio@...00000 {
> @@ -297,6 +298,7 @@ wkup_gpio1: gpio@...00000 {
>   		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
>   		clocks = <&k3_clks 114 0>;
>   		clock-names = "gpio";
> +		status = "disabled";
>   	};
>   
>   	mcu_i2c0: i2c@...00000 {
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
> index 4cd5346f2dd59..dfb6af60482e7 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
> @@ -731,41 +731,20 @@ &main_i2c5 {
>   };
>   
>   &main_gpio0 {
> +	status = "okay";
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&rpi_header_gpio0_pins_default>;
>   };
>   
>   &main_gpio1 {
> +	status = "okay";
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&rpi_header_gpio1_pins_default>;
>   };
>   
> -&main_gpio2 {
> -	status = "disabled";
> -};
> -
> -&main_gpio3 {
> -	status = "disabled";
> -};
> -
> -&main_gpio4 {
> -	status = "disabled";
> -};
> -
> -&main_gpio5 {
> -	status = "disabled";
> -};
> -
> -&main_gpio6 {
> -	status = "disabled";
> -};
> -
> -&main_gpio7 {
> -	status = "disabled";
> -};
> -
> -&wkup_gpio1 {
> -	status = "disabled";
> +&wkup_gpio0 {
> +	status = "okay";
> +	/* default pins */
>   };
>   
>   &usb_serdes_mux {

-- 
Thanks and Regards,
Dhruva Gole

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ