[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230807081725.fmjvdp3gxjs2ijee@intel.intel>
Date: Mon, 7 Aug 2023 10:17:25 +0200
From: Andi Shyti <andi.shyti@...nel.org>
To: "Liao, Chang" <liaochang1@...wei.com>
Cc: florian.fainelli@...adcom.com,
bcm-kernel-feedback-list@...adcom.com, rjui@...adcom.com,
sbranden@...adcom.com, yangyicong@...ilicon.com,
aisheng.dong@....com, shawnguo@...nel.org, s.hauer@...gutronix.de,
kernel@...gutronix.de, festevam@...il.com, linux-imx@....com,
kblaiech@...dia.com, asmaa@...dia.com, loic.poulain@...aro.org,
rfoss@...nel.org, ardb@...nel.org, gcherian@...vell.com,
linux-i2c@...r.kernel.org, linux-rpi-kernel@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org
Subject: Re: [PATCH 8/9] i2c: imx-lpi2c: Use dev_err_probe in probe function
On Mon, Aug 07, 2023 at 10:13:30AM +0800, Liao, Chang wrote:
> Hi, Andi
>
> 在 2023/8/5 6:16, Andi Shyti 写道:
> > On Wed, Aug 02, 2023 at 05:57:36PM +0800, Liao Chang wrote:
> >> Use the dev_err_probe function instead of dev_err in the probe function
> >> so that the printed messge includes the return value and also handles
> >> -EPROBE_DEFER nicely.
> >>
> >> Signed-off-by: Liao Chang <liaochang1@...wei.com>
> >> ---
> >> drivers/i2c/busses/i2c-imx-lpi2c.c | 12 ++++--------
> >> 1 file changed, 4 insertions(+), 8 deletions(-)
> >>
> >> diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
> >> index c3287c887c6f..bfa788b3775b 100644
> >> --- a/drivers/i2c/busses/i2c-imx-lpi2c.c
> >> +++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
> >> @@ -569,10 +569,8 @@ static int lpi2c_imx_probe(struct platform_device *pdev)
> >> sizeof(lpi2c_imx->adapter.name));
> >>
> >> ret = devm_clk_bulk_get_all(&pdev->dev, &lpi2c_imx->clks);
> >> - if (ret < 0) {
> >> - dev_err(&pdev->dev, "can't get I2C peripheral clock, ret=%d\n", ret);
> >> - return ret;
> >> - }
> >> + if (ret < 0)
> >> + return dev_err_probe(&pdev->dev, ret, "can't get I2C peripheral clock\n");
> >
> > you cut on this because the line was going over 100 characters? :)
> >
> > In theory you shouldn't change the print message when doing such
> > changes and you can still split it as:
> >
> > return dev_err_probe(&pdev->dev, ret,
> > "can't get I2C peripheral clock, ret=%d\n",
> > ret);
> >
> > and you're even within the 80 characters.
>
> Since dev_err_probe always print the second parameter that happens to be the return value,
> I remove the "ret=%d" from the original message to avoid a redundant error message.
>
> So is it better to keep the original message unchanged, even though dev_err_probe also prints
> the return error value? Or is it better to make this change so that all error messages printed
> in the probe function include the return value in a consistent style?
yes, you are right! Then please ignore this comment, but...
> > ret = devm_request_irq(&pdev->dev, irq, lpi2c_imx_isr, 0,
> > pdev->name, lpi2c_imx);
> > - if (ret) {
> > - dev_err(&pdev->dev, "can't claim irq %d\n", irq);
> > - return ret;
> > - }
> > + if (ret)
> > + return dev_err_probe(&pdev->dev, ret, "can't claim irq %d\n", irq);
please make it coherent to this second part, as well, where the
error number is printed.
Thank you,
Andi
Powered by blists - more mailing lists