| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <AM5PR04MB313903036E0DF277FEC45722880CA@AM5PR04MB3139.eurprd04.prod.outlook.com>
Date: Mon, 7 Aug 2023 10:30:34 +0000
From: Wei Fang <wei.fang@....com>
To: Jesper Dangaard Brouer <hawk@...nel.org>,
Jesper Dangaard Brouer <jbrouer@...hat.com>,
Jakub Kicinski <kuba@...nel.org>
CC: "brouer@...hat.com" <brouer@...hat.com>,
"davem@...emloft.net" <davem@...emloft.net>,
"edumazet@...gle.com" <edumazet@...gle.com>,
"pabeni@...hat.com" <pabeni@...hat.com>,
Shenwei Wang <shenwei.wang@....com>,
Clark Wang <xiaoning.wang@....com>,
"ast@...nel.org" <ast@...nel.org>,
"daniel@...earbox.net" <daniel@...earbox.net>,
"john.fastabend@...il.com" <john.fastabend@...il.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
dl-linux-imx <linux-imx@....com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"bpf@...r.kernel.org" <bpf@...r.kernel.org>,
Andrew Lunn <andrew@...n.ch>
Subject: RE: [PATCH V3 net-next] net: fec: add XDP_TX feature support
> > The flow-control was not disabled before, so according to your
> > suggestion, I disable the flow-control on the both boards and run the
> > test again, the performance is slightly improved, but still can not
> > see a clear difference between the two methods. Below are the results.
>
> Something else must be stalling the CPU.
> When looking at fec_main.c code, I noticed that
> fec_enet_txq_xmit_frame() will do a MMIO write for every xdp_frame (to
> trigger transmit start), which I believe will stall the CPU.
> The ndo_xdp_xmit/fec_enet_xdp_xmit does bulking, and should be the
> function that does the MMIO write to trigger transmit start.
>
We'd better keep a MMIO write for every xdp_frame on txq, as you know,
the txq will be inactive when no additional ready descriptors remain in the
tx-BDR. So it may increase the delay of the packets if we do a MMIO write
for multiple packets.
> $ git diff
> diff --git a/drivers/net/ethernet/freescale/fec_main.c
> b/drivers/net/ethernet/freescale/fec_main.c
> index 03ac7690b5c4..57a6a3899b80 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -3849,9 +3849,6 @@ static int fec_enet_txq_xmit_frame(struct
> fec_enet_private *fep,
>
> txq->bd.cur = bdp;
>
> - /* Trigger transmission start */
> - writel(0, txq->bd.reg_desc_active);
> -
> return 0;
> }
>
> @@ -3880,6 +3877,9 @@ static int fec_enet_xdp_xmit(struct net_device
> *dev,
> sent_frames++;
> }
>
> + /* Trigger transmission start */
> + writel(0, txq->bd.reg_desc_active);
> +
> __netif_tx_unlock(nq);
>
> return sent_frames;
>
>
> > Result: use "sync_dma_len" method
> > root@...8mpevk:~# ./xdp2 eth0
>
> The xdp2 (and xdp1) program(s) have a performance issue (due to using
>
> Can I ask you to test using xdp_rxq_info, like:
>
> sudo ./xdp_rxq_info --dev mlx5p1 --action XDP_TX
>
Yes, below are the results, the results are also basically the same.
Result 1: current method
./xdp_rxq_info --dev eth0 --action XDP_TX
Running XDP on dev:eth0 (ifindex:2) action:XDP_TX options:swapmac
XDP stats CPU pps issue-pps
XDP-RX CPU 0 259,102 0
XDP-RX CPU total 259,102
RXQ stats RXQ:CPU pps issue-pps
rx_queue_index 0:0 259,102 0
rx_queue_index 0:sum 259,102
Running XDP on dev:eth0 (ifindex:2) action:XDP_TX options:swapmac
XDP stats CPU pps issue-pps
XDP-RX CPU 0 259,498 0
XDP-RX CPU total 259,498
RXQ stats RXQ:CPU pps issue-pps
rx_queue_index 0:0 259,496 0
rx_queue_index 0:sum 259,496
Running XDP on dev:eth0 (ifindex:2) action:XDP_TX options:swapmac
XDP stats CPU pps issue-pps
XDP-RX CPU 0 259,408 0
XDP-RX CPU total 259,408
Result 2: dma_sync_len method
Running XDP on dev:eth0 (ifindex:2) action:XDP_TX options:swapmac
XDP stats CPU pps issue-pps
XDP-RX CPU 0 258,254 0
XDP-RX CPU total 258,254
RXQ stats RXQ:CPU pps issue-pps
rx_queue_index 0:0 258,254 0
rx_queue_index 0:sum 258,254
Running XDP on dev:eth0 (ifindex:2) action:XDP_TX options:swapmac
XDP stats CPU pps issue-pps
XDP-RX CPU 0 259,316 0
XDP-RX CPU total 259,316
RXQ stats RXQ:CPU pps issue-pps
rx_queue_index 0:0 259,318 0
rx_queue_index 0:sum 259,318
Running XDP on dev:eth0 (ifindex:2) action:XDP_TX options:swapmac
XDP stats CPU pps issue-pps
XDP-RX CPU 0 259,554 0
XDP-RX CPU total 259,554
RXQ stats RXQ:CPU pps issue-pps
rx_queue_index 0:0 259,553 0
rx_queue_index 0:sum 259,553
>
> > proto 17: 258886 pkt/s
> > proto 17: 258879 pkt/s
>
> If you provide numbers for xdp_redirect, then we could better evaluate if
> changing the lock per xdp_frame, for XDP_TX also, is worth it.
>
For XDP_REDIRECT, the performance show as follow.
root@...8mpevk:~# ./xdp_redirect eth1 eth0
Redirecting from eth1 (ifindex 3; driver st_gmac) to eth0 (ifindex 2; driver fec)
eth1->eth0 221,642 rx/s 0 err,drop/s 221,643 xmit/s
eth1->eth0 221,761 rx/s 0 err,drop/s 221,760 xmit/s
eth1->eth0 221,793 rx/s 0 err,drop/s 221,794 xmit/s
eth1->eth0 221,825 rx/s 0 err,drop/s 221,825 xmit/s
eth1->eth0 221,823 rx/s 0 err,drop/s 221,821 xmit/s
eth1->eth0 221,815 rx/s 0 err,drop/s 221,816 xmit/s
eth1->eth0 222,016 rx/s 0 err,drop/s 222,016 xmit/s
eth1->eth0 222,059 rx/s 0 err,drop/s 222,059 xmit/s
eth1->eth0 222,085 rx/s 0 err,drop/s 222,089 xmit/s
eth1->eth0 221,956 rx/s 0 err,drop/s 221,952 xmit/s
eth1->eth0 222,070 rx/s 0 err,drop/s 222,071 xmit/s
eth1->eth0 222,017 rx/s 0 err,drop/s 222,017 xmit/s
eth1->eth0 222,069 rx/s 0 err,drop/s 222,067 xmit/s
eth1->eth0 221,986 rx/s 0 err,drop/s 221,987 xmit/s
eth1->eth0 221,932 rx/s 0 err,drop/s 221,936 xmit/s
eth1->eth0 222,045 rx/s 0 err,drop/s 222,041 xmit/s
eth1->eth0 222,014 rx/s 0 err,drop/s 222,014 xmit/s
Packets received : 3,772,908
Average packets/s : 221,936
Packets transmitted : 3,772,908
Average transmit/s : 221,936
> And also find out of moving the MMIO write have any effect.
>
I move the MMIO write to fec_enet_xdp_xmit(), the result shows as follow,
the performance is slightly improved.
root@...8mpevk:~# ./xdp_redirect eth1 eth0
Redirecting from eth1 (ifindex 3; driver st_gmac) to eth0 (ifindex 2; driver fec)
eth1->eth0 222,666 rx/s 0 err,drop/s 222,668 xmit/s
eth1->eth0 221,663 rx/s 0 err,drop/s 221,664 xmit/s
eth1->eth0 222,743 rx/s 0 err,drop/s 222,741 xmit/s
eth1->eth0 222,917 rx/s 0 err,drop/s 222,923 xmit/s
eth1->eth0 221,810 rx/s 0 err,drop/s 221,808 xmit/s
eth1->eth0 222,891 rx/s 0 err,drop/s 222,888 xmit/s
eth1->eth0 222,983 rx/s 0 err,drop/s 222,984 xmit/s
eth1->eth0 221,655 rx/s 0 err,drop/s 221,653 xmit/s
eth1->eth0 222,827 rx/s 0 err,drop/s 222,827 xmit/s
eth1->eth0 221,728 rx/s 0 err,drop/s 221,728 xmit/s
eth1->eth0 222,790 rx/s 0 err,drop/s 222,789 xmit/s
eth1->eth0 222,874 rx/s 0 err,drop/s 222,874 xmit/s
eth1->eth0 221,888 rx/s 0 err,drop/s 221,887 xmit/s
eth1->eth0 223,057 rx/s 0 err,drop/s 223,056 xmit/s
eth1->eth0 222,219 rx/s 0 err,drop/s 222,220 xmit/s
Packets received : 3,336,711
Average packets/s : 222,447
Packets transmitted : 3,336,710
Average transmit/s : 222,447
> I also noticed driver does a MMIO write (on rxq) for every RX-packet in
> fec_enet_rx_queue() napi-poll loop. This also looks like a potential
> performance stall.
>
The same as txq, the rxq will be inactive if the rx-BDR has no free BDs, so we'd
better do a MMIO write when we recycle a BD, so that the hardware can timely
attach the received pakcets on the rx-BDR.
In addition, I also tried to avoid using xdp_convert_buff_to_frame(), but the
performance of XDP_TX is still not improved. :(
After these days of testing, I think it's best to keep the solution in V3, and then
make some optimizations on the V3 patch.
Powered by blists - more mailing lists