[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1691414091-2260697-1-git-send-email-radhey.shyam.pandey@amd.com>
Date: Mon, 7 Aug 2023 18:44:51 +0530
From: Radhey Shyam Pandey <radhey.shyam.pandey@....com>
To: <nicolas.ferre@...rochip.com>, <claudiu.beznea@...rochip.com>,
<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <linux@...linux.org.uk>,
<robert.hancock@...ian.com>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<git@....com>, Radhey Shyam Pandey <radhey.shyam.pandey@....com>
Subject: [PATCH net] net: macb: In ZynqMP resume always configure PS GTR for non-wakeup source
On Zynq UltraScale+ MPSoC ubuntu platform when systemctl issues suspend,
network manager bring down the interface and goes into suspend. When it
wakes up it again enables the interface.
This leads to xilinx-psgtr "PLL lock timeout" on interface bringup, as
the power management controller power down the entire FPD (including
SERDES) if none of the FPD devices are in use and serdes is not
initialized on resume.
$ sudo rtcwake -m no -s 120 -v
$ sudo systemctl suspend <this does ifconfig eth1 down>
$ ifconfig eth1 up
xilinx-psgtr fd400000.phy: lane 0 (type 10, protocol 5): PLL lock timeout
phy phy-fd400000.phy.0: phy poweron failed --> -110
macb driver is called in this way:
1. macb_close: Stop network interface. In this function, it
reset MACB IP and disables PHY and network interface.
2. macb_suspend: It is called in kernel suspend flow. But because
network interface has been disabled(netif_running(ndev) is
false), it does nothing and returns directly;
3. System goes into suspend state. Some time later, system is
waken up by RTC wakeup device;
4. macb_resume: It does nothing because network interface has
been disabled;
5. macb_open: It is called to enable network interface again. ethernet
interface is initialized in this API but serdes which is power-off
by PMUFW during FPD-off suspend is not initialized again and so
we hit GT PLL lock issue on open.
To resolve this PLL timeout issue always do PS GTR initialization
when ethernet device is configured as non-wakeup source.
Fixes: f22bd29ba19a ("net: macb: Fix ZynqMP SGMII non-wakeup source resume failure")
Fixes: 8b73fa3ae02b ("net: macb: Added ZynqMP-specific initialization")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@....com>
---
drivers/net/ethernet/cadence/macb_main.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index f6a0f12a6d52..82929ee76739 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -5194,6 +5194,9 @@ static int __maybe_unused macb_suspend(struct device *dev)
unsigned int q;
int err;
+ if (!device_may_wakeup(&bp->dev->dev))
+ phy_exit(bp->sgmii_phy);
+
if (!netif_running(netdev))
return 0;
@@ -5254,7 +5257,6 @@ static int __maybe_unused macb_suspend(struct device *dev)
if (!(bp->wol & MACB_WOL_ENABLED)) {
rtnl_lock();
phylink_stop(bp->phylink);
- phy_exit(bp->sgmii_phy);
rtnl_unlock();
spin_lock_irqsave(&bp->lock, flags);
macb_reset_hw(bp);
@@ -5284,6 +5286,9 @@ static int __maybe_unused macb_resume(struct device *dev)
unsigned int q;
int err;
+ if (!device_may_wakeup(&bp->dev->dev))
+ phy_init(bp->sgmii_phy);
+
if (!netif_running(netdev))
return 0;
@@ -5344,8 +5349,6 @@ static int __maybe_unused macb_resume(struct device *dev)
macb_set_rx_mode(netdev);
macb_restore_features(bp);
rtnl_lock();
- if (!device_may_wakeup(&bp->dev->dev))
- phy_init(bp->sgmii_phy);
phylink_start(bp->phylink);
rtnl_unlock();
--
2.34.1
Powered by blists - more mailing lists