[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230807141833.564479-1-Frank.Li@nxp.com>
Date: Mon, 7 Aug 2023 10:18:30 -0400
From: Frank Li <Frank.Li@....com>
To: helgaas@...nel.org
Cc: Frank.li@....com, bhelgaas@...gle.com, devicetree@...r.kernel.org,
gustavo.pimentel@...opsys.com, imx@...ts.linux.dev, kw@...ux.com,
leoyang.li@....com, linux-arm-kernel@...ts.infradead.org,
linux-imx@....com, linux-kernel@...r.kernel.org,
linux-pci@...r.kernel.org, lorenzo.pieralisi@....com,
lpieralisi@...nel.org, mani@...nel.org,
manivannan.sadhasivam@...aro.org, minghuan.lian@....com,
mingkai.hu@....com, robh+dt@...nel.org, roy.zang@....com,
shawnguo@...nel.org, zhiqiang.hou@....com
Subject: [PATCH v9 0/3] dwc general suspend/resume functionality
Change log
- Change from v9 to v10
min change according to Mani's feedback
Add Mani's ACK tag
- Change from v8 to v9
Reported-by: kernel test robot <lkp@...el.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308042251.yGAFqeDw-lkp@intel.com/
- Change from v7 to v8
Add new patch to add common PCIE_PME_TO_L2_TIMEOUT_US define.
timeout value using PCIE_PME_TO_L2_TIMEOUT_US.
- Chnage from v6 to v7
Remove local varible struct dw_pcie *pci = pcie->pci
Change according to Manivannan's feedback
remove unused lut_off and lut_base
fixed 100 to 1000(for 1ms)
using dev_err for timeout
refine commit message
fix sleep value 100 (should be 1000 for 1ms).
use dev_err when timeout
- Change from v5 to v6
change to NOIRQ_SYSTEM_SLEEP_PM_OPS to remove #ifdef PM_CONFIG
refine commit message
change according to Manivannan's comments.
remove reduncate step dw_pcie_set_dstate()
return 0 when .pme_turn_off is zero
call host_deinit() in suspend
check .host_deinit and .host_init point before call.
- Change from v4 to v5
Closes: https://lore.kernel.org/oe-kbuild-all/202307211904.zExw4Q8H-lkp@intel.com/
- Change from v3 to v4
change according to Manivannan's comments.
- change at v2 to v3
Basic rewrite whole patch according rob herry suggestion.
put common function into dwc, so more soc can share the same logic.
Frank Li (2):
PCI: Add macro PCIE_PME_TO_L2_TIMEOUT_US
PCI: dwc: Implement general suspend/resume functionality for L2/L3
transitions
Hou Zhiqiang (1):
PCI: layerscape: Add power management support for ls1028a
drivers/pci/controller/dwc/pci-layerscape.c | 130 ++++++++++++++++--
.../pci/controller/dwc/pcie-designware-host.c | 76 ++++++++++
drivers/pci/controller/dwc/pcie-designware.h | 28 ++++
drivers/pci/pci.h | 6 +
4 files changed, 231 insertions(+), 9 deletions(-)
--
2.34.1
Powered by blists - more mailing lists