lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <46594a4d-d61f-b374-9ea5-78022d99c3db@ti.com>
Date:   Wed, 9 Aug 2023 22:43:50 +0530
From:   Vaishnav Achath <vaishnav.a@...com>
To:     Udit Kumar <u-kumar1@...com>, <nm@...com>, <vigneshr@...com>,
        <t-konduru@...com>, <b-kapoor@...com>
CC:     <kristo@...nel.org>, <robh+dt@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] arm64: dts: ti: k3-j784s4-evm: Correct Pin mux offset for
 ADC

Hi Udit,

On 09/08/23 10:31, Udit Kumar wrote:
> After splitting wkup_pmx pin mux for J784S4 into four regions.
> Pin mux offset for ADC nodes were not updated to align with new
> regions, due to this while probing ADC driver out of range
> error was seen.
> 
> Pin mux offsets for ADC nodes are corrected in this patch.
> 
> Fixes: 14462bd0b247 ("arm64: dts: ti: k3-j784s4: Fix wakeup pinmux range and pinctrl node offsets")
> Signed-off-by: Udit Kumar <u-kumar1@...com>
> ---
> Reviewed pin mux for J784S4-EVM, AM69, J721S2-EVM and AM68
> ADC seems to be last one to be fixed.
> 
> In order to test this patch
> following drivers were built in as part of kernel
> CONFIG_MFD_TI_AM335X_TSCADC=y
> CONFIG_TI_AM335X_ADC=y
> 
> dtbs_check is done after applying
> https://lore.kernel.org/all/20230721082654.27036-1-tony@atomide.com/
> 
> logs with patch
> https://gist.github.com/uditkumarti/54db4d5e49467442e1698e5af82d787b#file-with_patch
> (line 1128 and 1130)
> 
> Original logs
> https://gist.github.com/uditkumarti/54db4d5e49467442e1698e5af82d787b#file-original_logs
> (line 942 and 946)
> 
>  arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 32 ++++++++++++------------
>  1 file changed, 16 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> index edc1009b2d1e..b4ffa720209c 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> @@ -340,27 +340,27 @@ J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */
>  
>  	mcu_adc0_pins_default: mcu-adc0-default-pins {
>  		pinctrl-single,pins = <
> -			J784S4_WKUP_IOPAD(0x134, PIN_INPUT, 0) /* (P36) MCU_ADC0_AIN0 */
> -			J784S4_WKUP_IOPAD(0x138, PIN_INPUT, 0) /* (V36) MCU_ADC0_AIN1 */
> -			J784S4_WKUP_IOPAD(0x13c, PIN_INPUT, 0) /* (T34) MCU_ADC0_AIN2 */
> -			J784S4_WKUP_IOPAD(0x140, PIN_INPUT, 0) /* (T36) MCU_ADC0_AIN3 */
> -			J784S4_WKUP_IOPAD(0x144, PIN_INPUT, 0) /* (P34) MCU_ADC0_AIN4 */
> -			J784S4_WKUP_IOPAD(0x148, PIN_INPUT, 0) /* (R37) MCU_ADC0_AIN5 */
> -			J784S4_WKUP_IOPAD(0x14c, PIN_INPUT, 0) /* (R33) MCU_ADC0_AIN6 */
> -			J784S4_WKUP_IOPAD(0x150, PIN_INPUT, 0) /* (V38) MCU_ADC0_AIN7 */
> +			J784S4_WKUP_IOPAD(0x0cc, PIN_INPUT, 0) /* (P36) MCU_ADC0_AIN0 */
> +			J784S4_WKUP_IOPAD(0x0d0, PIN_INPUT, 0) /* (V36) MCU_ADC0_AIN1 */
> +			J784S4_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (T34) MCU_ADC0_AIN2 */
> +			J784S4_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /* (T36) MCU_ADC0_AIN3 */
> +			J784S4_WKUP_IOPAD(0x0dc, PIN_INPUT, 0) /* (P34) MCU_ADC0_AIN4 */
> +			J784S4_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (R37) MCU_ADC0_AIN5 */
> +			J784S4_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (R33) MCU_ADC0_AIN6 */
> +			J784S4_WKUP_IOPAD(0x0e8, PIN_INPUT, 0) /* (V38) MCU_ADC0_AIN7 */
>  		>;
>  	};
>  
>  	mcu_adc1_pins_default: mcu-adc1-default-pins {
>  		pinctrl-single,pins = <
> -			J784S4_WKUP_IOPAD(0x154, PIN_INPUT, 0) /* (Y38) MCU_ADC1_AIN0 */
> -			J784S4_WKUP_IOPAD(0x158, PIN_INPUT, 0) /* (Y34) MCU_ADC1_AIN1 */
> -			J784S4_WKUP_IOPAD(0x15c, PIN_INPUT, 0) /* (V34) MCU_ADC1_AIN2 */
> -			J784S4_WKUP_IOPAD(0x160, PIN_INPUT, 0) /* (W37) MCU_ADC1_AIN3 */
> -			J784S4_WKUP_IOPAD(0x164, PIN_INPUT, 0) /* (AA37) MCU_ADC1_AIN4 */
> -			J784S4_WKUP_IOPAD(0x168, PIN_INPUT, 0) /* (W33) MCU_ADC1_AIN5 */
> -			J784S4_WKUP_IOPAD(0x16c, PIN_INPUT, 0) /* (U33) MCU_ADC1_AIN6 */
> -			J784S4_WKUP_IOPAD(0x170, PIN_INPUT, 0) /* (Y36) MCU_ADC1_AIN7 */
> +			J784S4_WKUP_IOPAD(0x0ec, PIN_INPUT, 0) /* (Y38) MCU_ADC1_AIN0 */
> +			J784S4_WKUP_IOPAD(0x0f0, PIN_INPUT, 0) /* (Y34) MCU_ADC1_AIN1 */
> +			J784S4_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /* (V34) MCU_ADC1_AIN2 */
> +			J784S4_WKUP_IOPAD(0x0f8, PIN_INPUT, 0) /* (W37) MCU_ADC1_AIN3 */
> +			J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA37) MCU_ADC1_AIN4 */
> +			J784S4_WKUP_IOPAD(0x100, PIN_INPUT, 0) /* (W33) MCU_ADC1_AIN5 */
> +			J784S4_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (U33) MCU_ADC1_AIN6 */
> +			J784S4_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (Y36) MCU_ADC1_AIN7 */

Thank you for the fix,

Reviewed-by: Vaishnav Achath <vaishnav.a@...com>

Thanks and Regards,
Vaishnav


>  		>;
>  	};
>  };

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ