| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <877cq42gc2.fsf@oltmanns.dev>
Date: Wed, 09 Aug 2023 20:58:21 +0200
From: Frank Oltmanns <frank@...manns.dev>
To: wens@...e.org
Cc: Maxime Ripard <mripard@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Samuel Holland <samuel@...lland.org>,
Andre Przywara <andre.przywara@....com>,
Roman Beranek <me@...y.cz>, linux-clk@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v6 00/11] clk: sunxi-ng: Consider alternative parent
rates when determining NKM clock rate
On 2023-08-10 at 00:44:53 +0800, Chen-Yu Tsai <wens@...e.org> wrote:
> On Mon, Aug 7, 2023 at 8:44 PM Frank Oltmanns <frank@...manns.dev> wrote:
>>
>> This patchset enables NKM clocks to consider alternative parent rates
>> and utilize this new feature to adjust the pll-video0 clock on Allwinner
>> A64.
>>
>> Furthermore, with this patchset pll-video0 considers rates that are
>> higher than the requested rate when finding the closest rate. In
>> consequence, higher rates are also considered by pll-video0's
>> descandents. In total, after applying this patchset, finding the closest
>> rate is supported by:
>> - ccu_nm
>> - ccu_nkm
>> - ccu_mux
>> - ccu_div
>>
>> This allows us to achieve an optimal rate for driving the board's panel.
>>
>> To provide some context, the clock structure involved in this process is
>> as follows:
>> clock clock type
>> --------------------------------------
>> pll-video0 ccu_nm
>> pll-mipi ccu_nkm
>> tcon0 ccu_mux
>> tcon-data-clock sun4i_dclk
>>
>> The divider between tcon0 and tcon-data-clock is fixed at 4. Therefore,
>> in order to achieve a rate that closely matches the desired rate of the
>> panel, pll-mipi needs to operate at a specific rate.
>>
>> Tests
>> =====
>> So far, this has been successfully tested on the A64-based Pinephone
>> using three different panel rates:
>>
>> 1. A panel rate that can be matched exactly by pll-video0.
>> 2. A panel rate that requires pll-video0 to undershoot to get the
>> closest rate.
>> 3. A panel rate that requires pll-video0 to overshoot to get the
>> closest rate.
>>
>> Test records:
>>
>> Re 1:
>> -----
>> Panel requests tcon-data-clock of 103500000 Hz, i.e., pll-mipi needs to
>> run at 414000000 Hz. This results in the following clock rates:
>> clock rate
>> -------------------------------------
>> pll-video0 207000000
>> hdmi-phy-clk 51750000
>> hdmi 207000000
>> tcon1 207000000
>> pll-mipi 414000000
>> tcon0 414000000
>> tcon-data-clock 103500000
>>
>> The results of the find_best calls:
>> ccu_nkm_find_best_with_parent_adj: rate=414000000, best_rate=414000000, best_parent_rate=207000000, n=1, k=2, m=1
>> ccu_nkm_find_best_with_parent_adj: rate=414000000, best_rate=414000000, best_parent_rate=207000000, n=1, k=2, m=1
>> ccu_nkm_find_best_with_parent_adj: rate=414000000, best_rate=414000000, best_parent_rate=207000000, n=1, k=2, m=1
>> ccu_nkm_find_best_with_parent_adj: rate=414000000, best_rate=414000000, best_parent_rate=207000000, n=1, k=2, m=1
>> ccu_nkm_find_best: rate=414000000, best_rate=414000000, parent_rate=207000000, n=1, k=2, m=1
>>
>> Re 2:
>> -----
>> Panel requests tcon-data-clock of 103650000 Hz, i.e., pll-mipi needs to
>> run at 414600000 Hz. This results in the following clock rates:
>> clock rate
>> -------------------------------------
>> pll-video0 282666666
>> hdmi-phy-clk 70666666
>> hdmi 282666666
>> tcon1 282666666
>> pll-mipi 414577776
>> tcon0 414577776
>> tcon-data-clock 103644444
>>
>> The results of the find_best calls:
>> ccu_nkm_find_best_with_parent_adj: rate=414600000, best_rate=414577776, best_parent_rate=282666666, n=11, k=2, m=15
>> ccu_nkm_find_best_with_parent_adj: rate=414600000, best_rate=414577776, best_parent_rate=282666666, n=11, k=2, m=15
>> ccu_nkm_find_best_with_parent_adj: rate=414577776, best_rate=414577776, best_parent_rate=282666666, n=11, k=2, m=15
>> ccu_nkm_find_best_with_parent_adj: rate=414577776, best_rate=414577776, best_parent_rate=282666666, n=11, k=2, m=15
>> ccu_nkm_find_best: rate=414577776, best_rate=414577776, parent_rate=282666666, n=11, k=2, m=15
>>
>> Re 3:
>> -----
>> Panel requests tcon-data-clock of 112266000 Hz, i.e., pll-mipi needs to
>> run at 449064000 Hz. This results in the following clock rates:
>> clock rate
>> -------------------------------------
>> pll-video0 207272727
>> hdmi-phy-clk 51818181
>> hdmi 207272727
>> tcon1 207272727
>> pll-mipi 449090908
>> tcon0 449090908
>> tcon-data-clock 112272727
>>
>> The results of the find_best calls:
>> ccu_nkm_find_best_with_parent_adj: rate=449064000, best_rate=449090908, best_parent_rate=207272727, n=13, k=2, m=12
>> ccu_nkm_find_best_with_parent_adj: rate=449064000, best_rate=449090908, best_parent_rate=207272727, n=13, k=2, m=12
>> ccu_nkm_find_best_with_parent_adj: rate=449090908, best_rate=449090908, best_parent_rate=207272727, n=13, k=2, m=12
>> ccu_nkm_find_best_with_parent_adj: rate=449090908, best_rate=449090908, best_parent_rate=207272727, n=13, k=2, m=12
>> ccu_nkm_find_best: rate=449090908, best_rate=449090908, parent_rate=207272727, n=13, k=2, m=12
>>
>> Changelog:
>> ----------
>> Changes in v6:
>> - Removed unnecessary #include from ccu_nkm.c
>> - Link to v5: https://lore.kernel.org/r/20230806-pll-mipi_set_rate_parent-v5-0-db4f5ca33fc3@oltmanns.dev
>>
>> Changes in v5:
>> - Remove the dedicated function for calculating the optimal parent rate
>> for nkm clocks that was introduced in v2 and again in v4. Instead use
>> a simple calculation and require the parent clock to select the
>> closest rate to achieve optimal results.
>> - Change the order of parameters of nkm_best_rate and
>> nkm_best_rate_with_parent_adj as requested my Maxime Ripard.
>> - Prefer to not reset the rate of the nkm clock's parent if the ideal
>> rate can be reached using the parent's current rate, copying the
>> behavior of ccu_mp.
>> - Link to v4: https://lore.kernel.org/r/20230717-pll-mipi_set_rate_parent-v4-0-04acf1d39765@oltmanns.dev
>>
>> Changes in v4:
>> - Re-introduce a dedicated function for calculating the optimal parent
>> rate for nkm clocks that was introduced in v2 and removed in v3. It
>> turned out that not having this functionality introduces a bug when
>> the parent does not support finding the closest rate:
>> https://lore.kernel.org/all/87pm4xg2ub.fsf@oltmanns.dev/
>> - Incorporate review remarks:
>> - Correcting the parameter name for ccu_nkm_round_rate()'s parent HW
>> is now in a separate patch.
>> - Use correct parameter order in ccu_nkm_find_best_with_parent_adj.
>> - Add ccu_is_better_rate() and use it for determining the best rate
>> for nm and nkm, as well as ccu_mux_helper_determine_rate.
>> - Consistently introduce new macros for clock variants that support
>> finding the closest rate instead of updating existing macros.
>> - Use wrapper function for determining a ccu_mux's rate in order to
>> support finding the closest rate.
>> - Link to v3: https://lore.kernel.org/r/20230702-pll-mipi_set_rate_parent-v3-0-46dcb8aa9cbc@oltmanns.dev
>>
>> Changes in v3:
>> - Use dedicated function for finding the best rate in cases where an
>> nkm clock supports setting its parent's rate, streamlining it with
>> the structure that is used in other sunxi-ng ccus such as ccu_mp
>> (PATCH 1).
>> - Therefore, remove the now obsolete comments that were introduced in
>> v2 (PATCH 1).
>> - Remove the dedicated function for calculating the optimal parent rate
>> for nkm clocks that was introduced in v2. Instead use a simple
>> calculation and require the parent clock to select the closest rate to
>> achieve optimal results (PATCH 1).
>> - Therefore, add support to set the closest rate for nm clocks (because
>> pll-mipi's parent pll-video0 is an nm clock) and all clock types that
>> are descendants of a64's pll-video0, i.e., nkm, mux, and div (PATCH 3
>> et. seq.).
>> - Link to v2: https://lore.kernel.org/all/20230611090143.132257-1-frank@oltmanns.dev/
>>
>> Changes in V2:
>> - Move optimal parent rate calculation to dedicated function
>> - Choose a parent rate that does not to overshoot requested rate
>> - Add comments to ccu_nkm_find_best
>> - Make sure that best_parent_rate stays at original parent rate in the unlikely
>> case that all combinations overshoot.
>>
>> Link to V1:
>> https://lore.kernel.org/lkml/20230605190745.366882-1-frank@oltmanns.dev/
>>
>> ---
>> Frank Oltmanns (11):
>> clk: sunxi-ng: nkm: Use correct parameter name for parent HW
>> clk: sunxi-ng: nkm: consider alternative parent rates when determining rate
>> clk: sunxi-ng: a64: allow pll-mipi to set parent's rate
>> clk: sunxi-ng: Add feature to find closest rate
>> clk: sunxi-ng: Add helper function to find closest rate
>> clk: sunxi-ng: nm: Support finding closest rate
>> clk: sunxi-ng: nkm: Support finding closest rate
>> clk: sunxi-ng: mux: Support finding closest rate
>> clk: sunxi-ng: div: Support finding closest rate
>> clk: sunxi-ng: a64: select closest rate for pll-video0
>> clk: sunxi-ng: nkm: Prefer current parent rate
>
> Whole series applied. There were some conflicts on patch 10 I had to
> fix up. I also took the liberty of realigning some of the lines.
> Please check if things are correct:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git/commit/?h=sunxi/clk-for-6.6&id=bf8eb12f52c49e10ca1d86564bfa096e09c51c38
>
Thank you. I'm sorry, I used the wrong base-commit. Yours looks perfect!
Also thank you for re-indenting. Looks cleaner.
Best regards,
Frank
>
> ChenYu
>
>> drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 36 ++++++++++-------------
>> drivers/clk/sunxi-ng/ccu_common.c | 12 ++++++++
>> drivers/clk/sunxi-ng/ccu_common.h | 6 ++++
>> drivers/clk/sunxi-ng/ccu_div.h | 30 +++++++++++++++++++
>> drivers/clk/sunxi-ng/ccu_mux.c | 15 ++++++++--
>> drivers/clk/sunxi-ng/ccu_mux.h | 38 +++++++++++++++++-------
>> drivers/clk/sunxi-ng/ccu_nkm.c | 55 ++++++++++++++++++++++++++++++-----
>> drivers/clk/sunxi-ng/ccu_nm.c | 13 ++++-----
>> drivers/clk/sunxi-ng/ccu_nm.h | 48 ++++++++++++++++++++++++++++--
>> 9 files changed, 202 insertions(+), 51 deletions(-)
>> ---
>> base-commit: 6995e2de6891c724bfeb2db33d7b87775f913ad1
>> change-id: 20230626-pll-mipi_set_rate_parent-3363fc0d6e6f
>>
>> Best regards,
>> --
>> Frank Oltmanns <frank@...manns.dev>
>>
Powered by blists - more mailing lists