Message-ID: <CAPDyKFo0TYw-8Mq8eUasvh0bVM1NLcWR+QZvt-=S2Jb+S7rYBA@mail.gmail.com>
Date:   Wed, 9 Aug 2023 12:58:47 +0200
From:   Ulf Hansson <ulf.hansson@...aro.org>
To:     Liming Sun <limings@...dia.com>
Cc:     Adrian Hunter <adrian.hunter@...el.com>,
        David Thompson <davthompson@...dia.com>,
        Shawn Lin <shawn.lin@...k-chips.com>,
        linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v6] mmc: sdhci-of-dwcmshc: Add runtime PM operations

On Sat, 5 Aug 2023 at 01:30, Liming Sun <limings@...dia.com> wrote:
>
> This commit implements the runtime PM operations to disable eMMC
> card clock when idle.
>
> Reviewed-by: David Thompson <davthompson@...dia.com>
> Signed-off-by: Liming Sun <limings@...dia.com>
> ---
> v5->v6:
>     - Address Adrian's more comments and add coordination between
>       runtime PM and system PM;
> v4->v5:
>     - Address Adrian's comment to move the pm_enable to the end to
>       avoid race;
> v3->v4:
>     - Fix compiling reported by 'kernel test robot';
> v2->v3:
>     - Revise the commit message;
> v1->v2:
>     Updates for comments from Ulf:
>     - Make the runtime PM logic generic for sdhci-of-dwcmshc;
> v1: Initial version.
> ---
>  drivers/mmc/host/sdhci-of-dwcmshc.c | 72 ++++++++++++++++++++++++++++-
>  1 file changed, 70 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
> index e68cd87998c8..aaf66358f626 100644
> --- a/drivers/mmc/host/sdhci-of-dwcmshc.c
> +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
> @@ -15,6 +15,7 @@
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/of_device.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/reset.h>
>  #include <linux/sizes.h>
>
> @@ -548,9 +549,13 @@ static int dwcmshc_probe(struct platform_device *pdev)
>
>         host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
>
> +       pm_runtime_get_noresume(dev);
> +       pm_runtime_set_active(dev);
> +       pm_runtime_enable(dev);
> +
>         err = sdhci_setup_host(host);
>         if (err)
> -               goto err_clk;
> +               goto err_rpm;
>
>         if (rk_priv)
>                 dwcmshc_rk35xx_postinit(host, priv);
> @@ -559,10 +564,15 @@ static int dwcmshc_probe(struct platform_device *pdev)
>         if (err)
>                 goto err_setup_host;
>
> +       pm_runtime_put_sync(dev);
> +
>         return 0;
>
>  err_setup_host:
>         sdhci_cleanup_host(host);
> +err_rpm:
> +       pm_runtime_disable(dev);
> +       pm_runtime_put_noidle(dev);
>  err_clk:
>         clk_disable_unprepare(pltfm_host->clk);
>         clk_disable_unprepare(priv->bus_clk);
> @@ -606,6 +616,12 @@ static int dwcmshc_suspend(struct device *dev)
>         if (ret)
>                 return ret;
>

sdhci_suspend_host() is called a few lines above, which requires the
host to be runtime resumed when called. This may not be the case here.

To fix this there are in principle two options:

1) Call a pm_runtime_get_sync() around here and a corresponding
pm_runtime_put_noidle() somewhere after you have called
pm_runtime_force_suspend().

2) Move away from using sdhci_suspend|resume_host(), but use
sdhci_runtime_suspend|resume_host() instead. This requires some
additional changes, but with the benefit that we can avoid runtime
resuming the device upfront. In this case,
sdhci_runtime_suspend|resume_host() should be called from
dwcmshc_runtime_suspend|resume(). Moreover, we either need to move the
entire clock mgmt from dwcmshc_suspend|resume() into the
dwcmshc_runtime_suspend|resume() or call pm_runtime_get_noresume()
before calling pm_runtime_force_suspend() and pm_runtime_put_noidle()
just after it.

> +       ret = pm_runtime_force_suspend(dev);
> +       if (ret) {
> +               sdhci_resume_host(host);
> +               return ret;
> +       }
> +
>         clk_disable_unprepare(pltfm_host->clk);
>         if (!IS_ERR(priv->bus_clk))
>                 clk_disable_unprepare(priv->bus_clk);
> @@ -625,6 +641,10 @@ static int dwcmshc_resume(struct device *dev)
>         struct rk35xx_priv *rk_priv = priv->priv;
>         int ret;
>
> +       ret = pm_runtime_force_resume(dev);
> +       if (ret)
> +               return ret;
> +
>         ret = clk_prepare_enable(pltfm_host->clk);
>         if (ret)
>                 return ret;
> @@ -646,7 +666,55 @@ static int dwcmshc_resume(struct device *dev)
>  }
>  #endif
>
> -static SIMPLE_DEV_PM_OPS(dwcmshc_pmops, dwcmshc_suspend, dwcmshc_resume);
> +#ifdef CONFIG_PM
> +
> +static void dwcmshc_enable_card_clk(struct sdhci_host *host)
> +{
> +       u16 ctrl;
> +
> +       ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> +       if ((ctrl & SDHCI_CLOCK_INT_EN) && !(ctrl & SDHCI_CLOCK_CARD_EN)) {
> +               ctrl |= SDHCI_CLOCK_CARD_EN;
> +               sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL);
> +       }
> +}
> +
> +static void dwcmshc_disable_card_clk(struct sdhci_host *host)
> +{
> +       u16 ctrl;
> +
> +       ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> +       if (ctrl & SDHCI_CLOCK_CARD_EN) {
> +               ctrl &= ~SDHCI_CLOCK_CARD_EN;
> +               sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL);
> +       }
> +}
> +
> +static int dwcmshc_runtime_suspend(struct device *dev)
> +{
> +       struct sdhci_host *host = dev_get_drvdata(dev);
> +
> +       dwcmshc_disable_card_clk(host);
> +
> +       return 0;
> +}
> +
> +static int dwcmshc_runtime_resume(struct device *dev)
> +{
> +       struct sdhci_host *host = dev_get_drvdata(dev);
> +
> +       dwcmshc_enable_card_clk(host);
> +
> +       return 0;
> +}
> +
> +#endif
> +
> +static const struct dev_pm_ops dwcmshc_pmops = {
> +       SET_SYSTEM_SLEEP_PM_OPS(dwcmshc_suspend, dwcmshc_resume)
> +       SET_RUNTIME_PM_OPS(dwcmshc_runtime_suspend,
> +                          dwcmshc_runtime_resume, NULL)
> +};
>
>  static struct platform_driver sdhci_dwcmshc_driver = {
>         .driver = {

Kind regards
Uffe

Powered by blists - more mailing lists