linux-kernel - [PATCH RESEND] tty: serial: qcom-geni-serial: Poll primary sequencer irq status after cancel

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1691583100-15689-1-git-send-email-quic_vnivarth@quicinc.com>
Date:   Wed,  9 Aug 2023 17:41:40 +0530
From:   Vijaya Krishna Nivarthi <quic_vnivarth@...cinc.com>
To:     agross@...nel.org, bjorn.andersson@...nel.org,
        konrad.dybcio@...aro.org, gregkh@...uxfoundation.org,
        jirislaby@...nel.org, bartosz.golaszewski@...aro.org,
        linux-arm-msm@...r.kernel.org, linux-serial@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     quic_msavaliy@...cinc.com, dianders@...omium.org, mka@...omium.org,
        swboyd@...omium.org, quic_vtanuku@...cinc.com,
        Vijaya Krishna Nivarthi <quic_vnivarth@...cinc.com>
Subject: [PATCH RESEND] tty: serial: qcom-geni-serial: Poll primary sequencer irq status after cancel_tx

TX is handled by primary sequencer. After cancelling primary command, poll
primary sequencer's irq status instead of that of secondary.
While at it, also remove a couple of redundant lines that read from IRQ_EN
register and write back same.

Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@...cinc.com>
---
 drivers/tty/serial/qcom_geni_serial.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 3ca5db2..b8aa4c1 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -591,7 +591,6 @@ static void qcom_geni_serial_stop_tx_dma(struct uart_port *uport)
 {
 	struct qcom_geni_serial_port *port = to_dev_port(uport);
 	bool done;
-	u32 m_irq_en;
 
 	if (!qcom_geni_serial_main_active(uport))
 		return;
@@ -603,12 +602,10 @@ static void qcom_geni_serial_stop_tx_dma(struct uart_port *uport)
 		port->tx_remaining = 0;
 	}
 
-	m_irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
-	writel(m_irq_en, uport->membase + SE_GENI_M_IRQ_EN);
 	geni_se_cancel_m_cmd(&port->se);
 
-	done = qcom_geni_serial_poll_bit(uport, SE_GENI_S_IRQ_STATUS,
-					 S_CMD_CANCEL_EN, true);
+	done = qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
+					 M_CMD_CANCEL_EN, true);
 	if (!done) {
 		geni_se_abort_m_cmd(&port->se);
 		done = qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
-- 
2.7.4