[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230809144005.n3uq5yjusrrtjhqz@churn>
Date: Wed, 9 Aug 2023 09:40:05 -0500
From: Nishanth Menon <nm@...com>
To: Aradhya Bhatia <a-bhatia1@...com>
CC: Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Catalin Marinas <catalin.marinas@....com>,
Conor Dooley <conor+dt@...nel.org>,
Will Deacon <will@...nel.org>,
Francesco Dolcini <francesco@...cini.it>,
Devicetree List <devicetree@...r.kernel.org>,
Linux Kernel List <linux-kernel@...r.kernel.org>,
Linux ARM Kernel List <linux-arm-kernel@...ts.infradead.org>,
Tomi Valkeinen <tomi.valkeinen@...asonboard.com>,
Rahul T R <r-ravikumar@...com>,
Devarsh Thakkar <devarsht@...com>,
Jai Luthra <j-luthra@...com>,
Jayesh Choudhary <j-choudhary@...com>
Subject: Re: [PATCH v5 0/6] arm64: ti: k3-am62: Add display support
On 14:15-20230809, Aradhya Bhatia wrote:
> Hi all,
>
> The patch series adds DT nodes for Display SubSystem (DSS) and other
> peripherals required to enable the HDMI audio and video on the AM625 SK,
> AM62-LP SK, as well as the AM625 based Beagle-Play platforms. An HDMI
> monitor can be connected to the boards for the audio/video outputs.
>
> The series adding the compatible and basic driver support[0] is in the
> drm-misc-next and linux-next queues and is expected to be in the
> mainline by v6.6-rc1. Patch 5/6 also requires Nishanth Menon's patch[1]
> that introduces debounce select mux macros. This patch too is not in
> v6.5-rc1 but has been picked up in ti-next[2] and hence, is present in
> linux-next.
>
> Patches 4 and 5 have been picked up from TI's vendor tree[3] based off
> linux-kernel v6.1.
>
> Regards
> Aradhya
>
> Change Log:
> V4 -> V5:
> - Cosmetic changes as suggested by Jayesh.
> - Fixed the mis-represented DSS VP1 clock, and added a
> fixed-factor-clock.
>
> V3 -> V4:
> - Added "Fixes" tag for patch 1/6.
> - Rebased to linux-next.
> - Enabled display at board level and disabled at SoC level.
> - Dropped OLDI pinmux configuration as OLDI output comes directly from
> the SoC and muxing is not required.
> - Squashed DSS pinmux patches into their platform specific HDMI
> support patches, because it did not make sense to have only one set
> of pinmux config separated in a patch.
>
> V2 -> V3:
> - Updated the compatible from "ti,am65x-dss" to "ti,am625-dss".
> - Peripheral nodes like HDMI TX, HDMI connector are now added to
> k3-am62x-sk-common.dtsi instead of k3-am625-sk.dts, in order to
> support AM62-LP SK-EVM as well.
> - Dropped the HDMI master clock node as it is not connected on the
> EVM, and should not have been added in the first place.
> - Re-worded and Re-ordered commits.
> - Dropped Rahul Ravikumar's R-bs because of the changes.
> - Added AM625 based Beagle-Play for HDMI support.
> - Added HDMI audio support as well.
>
> V1 -> V2:
> - Removed repetitive data in dss_ports
>
> V4: https://lore.kernel.org/all/20230807153307.22174-1-a-bhatia1@ti.com/
> V3: https://lore.kernel.org/all/20230728173438.12995-1-a-bhatia1@ti.com/
> V2: https://lore.kernel.org/all/20220505134303.23208-1-a-bhatia1@ti.com/
> V1: https://lore.kernel.org/all/20220427090850.32280-1-a-bhatia1@ti.com/
>
> [0]: https://lore.kernel.org/all/20230616150900.6617-1-a-bhatia1@ti.com/
> [1]: https://lore.kernel.org/all/20230619131620.3286650-1-nm@ti.com/
> [2]: https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git/commit/?id=0bec3d7ecc7493b0e530f6f34539841ef6779006
> [3]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/log/?h=ti-linux-6.1.y-cicd
>
>
> Aradhya Bhatia (4):
> arm64: dts: ti: k3-am62x-sk-common: Update main-i2c1 frequency
> arm64: dts: ti: k3-am62-main: Add node for DSS
> arm64: dts: ti: k3-am62x-sk-common: Add HDMI support
> arm64: defconfig: Enable ITE_IT66121 HDMI transmitter
>
> Jai Luthra (1):
> arm64: dts: ti: am62x-sk: Add overlay for HDMI audio
>
> Nishanth Menon (1):
> arm64: dts: ti: k3-am625-beagleplay: Add HDMI support
>
> arch/arm64/boot/dts/ti/Makefile | 3 +
> arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 25 +++
> arch/arm64/boot/dts/ti/k3-am62.dtsi | 8 +
> .../arm64/boot/dts/ti/k3-am625-beagleplay.dts | 150 ++++++++++++++++++
> .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 93 ++++++++++-
> .../boot/dts/ti/k3-am62x-sk-hdmi-audio.dtso | 40 +++++
> arch/arm64/configs/defconfig | 1 +
> 7 files changed, 319 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm64/boot/dts/ti/k3-am62x-sk-hdmi-audio.dtso
>
>
> base-commit: 71cd4fc492ec41e4acd85e98bbf7a13753fc1e03
> --
> 2.40.1
>
Can you help cleanup the following before we start introducing new oldi
and dss support? I am not sure if these were introduced due to yaml
updates or something pre-existing.
linux/build/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dtb: dss-oldi-io-ctrl@...0: compatible: 'anyOf' conditional failed, one must be fixed:
linux/build/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dtb: dss-oldi-io-ctrl@...0: compatible: 'anyOf' conditional failed, one must be fixed:
linux/build/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dtb: dss-oldi-io-ctrl@...0: compatible: 'anyOf' conditional failed, one must be fixed:
linux/build/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dtb: dss-oldi-io-ctrl@...0: compatible: 'anyOf' conditional failed, one must be fixed:
linux/build/arch/arm64/boot/dts/ti/k3-am654-base-board.dtb: dss-oldi-io-ctrl@...0: compatible: 'anyOf' conditional failed, one must be fixed:
linux/build/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dtb: dss-oldi-io-ctrl@...0: compatible: 'anyOf' conditional failed, one must be fixed:
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Powered by blists - more mailing lists