linux-kernel - [PATCH v3 02/13] arm64: dts: ti: k3-j7200: Enable SDHCI nodes at the board level

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230810003814.85450-3-afd@ti.com>
Date:   Wed, 9 Aug 2023 19:38:03 -0500
From:   Andrew Davis <afd@...com>
To:     Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>,
        Tero Kristo <kristo@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>, Dhruva Gole <d-gole@...com>
CC:     <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Andrew Davis <afd@...com>
Subject: [PATCH v3 02/13] arm64: dts: ti: k3-j7200: Enable SDHCI nodes at the board level

SDHCI nodes defined in the top-level J7200 SoC dtsi files are incomplete
and will not be functional unless they are extended.

As the attached SD/eMMC is only known about at the board integration level,
these nodes should only be enabled when provided with this information.

Disable the SDHCI nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd@...com>
---
 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 2 ++
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi             | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 92a5414911729..dee9056f56051 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -326,6 +326,7 @@ exp3: gpio@20 {
 
 &main_sdhci0 {
 	/* eMMC */
+	status = "okay";
 	non-removable;
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
@@ -333,6 +334,7 @@ &main_sdhci0 {
 
 &main_sdhci1 {
 	/* SD card */
+	status = "okay";
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	pinctrl-names = "default";
 	vmmc-supply = <&vdd_mmc1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 6eaade5aeb423..5d7542ba41b93 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -654,6 +654,7 @@ main_sdhci0: mmc@...0000 {
 		mmc-hs200-1_8v;
 		mmc-hs400-1_8v;
 		dma-coherent;
+		status = "disabled";
 	};
 
 	main_sdhci1: mmc@...0000 {
@@ -677,6 +678,7 @@ main_sdhci1: mmc@...0000 {
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
+		status = "disabled";
 	};
 
 	serdes_wiz0: wiz@...0000 {
-- 
2.39.2