lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230810160806.335674426@linutronix.de>
Date:   Thu, 10 Aug 2023 20:38:01 +0200 (CEST)
From:   Thomas Gleixner <tglx@...utronix.de>
To:     LKML <linux-kernel@...r.kernel.org>
Cc:     x86@...nel.org, Borislav Petkov <bp@...en8.de>,
        Ashok Raj <ashok.raj@...el.com>,
        Arjan van de Ven <arjan@...ux.intel.com>
Subject: [patch 24/30] x86/microcode: Replace the all in one rendevouz handler

From: Thomas Gleixner <tglx@...utronix.de>

with a new handler which just separates the control flow of primary and
secondary CPUs.

Signed-off-by: Thomas Gleixner <tglx@...utronix.de>

---
 arch/x86/kernel/cpu/microcode/core.c |   51 ++++++-----------------------------
 1 file changed, 9 insertions(+), 42 deletions(-)
---
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -337,7 +337,7 @@ struct ucode_ctrl {
 };
 
 static DEFINE_PER_CPU(struct ucode_ctrl, ucode_ctrl);
-static atomic_t late_cpus_in, late_cpus_out;
+static atomic_t late_cpus_in;
 
 static bool wait_for_cpus(atomic_t *cnt)
 {
@@ -371,7 +371,7 @@ static bool wait_for_ctrl(void)
 	return false;
 }
 
-static __maybe_unused void ucode_load_secondary(unsigned int cpu)
+static void ucode_load_secondary(unsigned int cpu)
 {
 	unsigned int ctrl_cpu = this_cpu_read(ucode_ctrl.ctrl_cpu);
 	enum ucode_state ret;
@@ -407,7 +407,7 @@ static __maybe_unused void ucode_load_se
 	this_cpu_write(ucode_ctrl.ctrl, SCTRL_DONE);
 }
 
-static __maybe_unused void ucode_load_primary(unsigned int cpu)
+static void ucode_load_primary(unsigned int cpu)
 {
 	struct cpumask *secondaries = topology_sibling_cpumask(cpu);
 	enum sibling_ctrl ctrl;
@@ -445,46 +445,14 @@ static __maybe_unused void ucode_load_pr
 
 static int ucode_load_cpus_stopped(void *unused)
 {
-	int cpu = smp_processor_id();
-	enum ucode_state ret;
-
-	/*
-	 * Wait for all CPUs to arrive. A load will not be attempted unless all
-	 * CPUs show up.
-	 * */
-	if (!wait_for_cpus(&late_cpus_in)) {
-		this_cpu_write(ucode_ctrl.result, UCODE_TIMEOUT);
-		return 0;
-	}
-
-	/*
-	 * On an SMT system, it suffices to load the microcode on one sibling of
-	 * the core because the microcode engine is shared between the threads.
-	 * Synchronization still needs to take place so that no concurrent
-	 * loading attempts happen on multiple threads of an SMT core. See
-	 * below.
-	 */
-	if (cpumask_first(topology_sibling_cpumask(cpu)) != cpu)
-		goto wait_for_siblings;
+	unsigned int cpu = smp_processor_id();
 
-	ret = microcode_ops->apply_microcode(cpu);
-	this_cpu_write(ucode_ctrl.result, ret);
-
-wait_for_siblings:
-	if (!wait_for_cpus(&late_cpus_out))
-		panic("Timeout during microcode update!\n");
-
-	/*
-	 * At least one thread has completed update on each core.
-	 * For others, simply call the update to make sure the
-	 * per-cpu cpuinfo can be updated with right microcode
-	 * revision.
-	 */
-	if (cpumask_first(topology_sibling_cpumask(cpu)) == cpu)
-		return 0;
+	if (this_cpu_read(ucode_ctrl.ctrl_cpu) == cpu)
+		ucode_load_primary(cpu);
+	else
+		ucode_load_secondary(cpu);
 
-	ret = microcode_ops->apply_microcode(cpu);
-	this_cpu_write(ucode_ctrl.result, ret);
+	/* No point to wait here. The CPUs will all wait in stop_machine(). */
 	return 0;
 }
 
@@ -498,7 +466,6 @@ static int ucode_load_late_stop_cpus(voi
 	pr_err("You should switch to early loading, if possible.\n");
 
 	atomic_set(&late_cpus_in, num_online_cpus());
-	atomic_set(&late_cpus_out, num_online_cpus());
 
 	/*
 	 * Take a snapshot before the microcode update in order to compare and

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ