| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230810003814.85450-9-afd@ti.com>
Date: Wed, 9 Aug 2023 19:38:09 -0500
From: Andrew Davis <afd@...com>
To: Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Dhruva Gole <d-gole@...com>
CC: <linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Andrew Davis <afd@...com>
Subject: [PATCH v3 08/13] arm64: dts: ti: k3-j721e: Enable GPIO nodes at the board level
GPIO nodes defined in the top-level J721e SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux and
device information.
Disable the GPIO nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@...com>
Reviewed-by: Dhruva Gole <d-gole@...com>
---
.../boot/dts/ti/k3-j721e-beagleboneai64.dts | 41 +++----------------
.../dts/ti/k3-j721e-common-proc-board.dts | 33 ++++-----------
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 8 ++++
.../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 2 +
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 30 ++------------
5 files changed, 27 insertions(+), 87 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
index 0b89977351c98..f06e7bda46f01 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
@@ -647,52 +647,23 @@ eeprom@50 {
};
};
-&main_gpio2 {
- /* Unused */
- status = "disabled";
-};
-
-&main_gpio3 {
- /* Unused */
- status = "disabled";
-};
-
-&main_gpio4 {
- /* Unused */
- status = "disabled";
-};
-
-&main_gpio5 {
- /* Unused */
- status = "disabled";
-};
-
-&main_gpio6 {
- /* Unused */
- status = "disabled";
-};
-
-&main_gpio7 {
- /* Unused */
- status = "disabled";
-};
-
&wkup_gpio0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_adc0_pins_default>, <&mcu_adc1_pins_default>,
<&mikro_bus_pins_default>;
};
-&wkup_gpio1 {
- /* Unused */
- status = "disabled";
-};
-
&main_gpio0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&csi1_gpio_pins_default>, <&csi0_gpio_pins_default>;
};
+&main_gpio1 {
+ status = "okay";
+};
+
&usb_serdes_mux {
idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index e9b84d2c64b26..824874a7dcb95 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -469,37 +469,18 @@ &main_uart4 {
pinctrl-0 = <&main_uart4_pins_default>;
};
-&main_gpio2 {
- status = "disabled";
-};
-
-&main_gpio3 {
- status = "disabled";
-};
-
-&main_gpio4 {
- status = "disabled";
-};
-
-&main_gpio5 {
- status = "disabled";
-};
-
-&main_gpio6 {
- status = "disabled";
-};
-
-&main_gpio7 {
- status = "disabled";
-};
-
&wkup_gpio0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&wkup_gpio_pins_default>;
};
-&wkup_gpio1 {
- status = "disabled";
+&main_gpio0 {
+ status = "okay";
+};
+
+&main_gpio1 {
+ status = "okay";
};
&main_sdhci0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 0ca31186b9b74..7f663d9280b57 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1339,6 +1339,7 @@ main_gpio0: gpio@...000 {
power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 105 0>;
clock-names = "gpio";
+ status = "disabled";
};
main_gpio1: gpio@...000 {
@@ -1355,6 +1356,7 @@ main_gpio1: gpio@...000 {
power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 106 0>;
clock-names = "gpio";
+ status = "disabled";
};
main_gpio2: gpio@...000 {
@@ -1372,6 +1374,7 @@ main_gpio2: gpio@...000 {
power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 107 0>;
clock-names = "gpio";
+ status = "disabled";
};
main_gpio3: gpio@...000 {
@@ -1388,6 +1391,7 @@ main_gpio3: gpio@...000 {
power-domains = <&k3_pds 108 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 108 0>;
clock-names = "gpio";
+ status = "disabled";
};
main_gpio4: gpio@...000 {
@@ -1405,6 +1409,7 @@ main_gpio4: gpio@...000 {
power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 109 0>;
clock-names = "gpio";
+ status = "disabled";
};
main_gpio5: gpio@...000 {
@@ -1421,6 +1426,7 @@ main_gpio5: gpio@...000 {
power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 110 0>;
clock-names = "gpio";
+ status = "disabled";
};
main_gpio6: gpio@...000 {
@@ -1438,6 +1444,7 @@ main_gpio6: gpio@...000 {
power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 111 0>;
clock-names = "gpio";
+ status = "disabled";
};
main_gpio7: gpio@...000 {
@@ -1454,6 +1461,7 @@ main_gpio7: gpio@...000 {
power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 112 0>;
clock-names = "gpio";
+ status = "disabled";
};
main_sdhci0: mmc@...0000 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index 0c01bdd9656f1..4d107eee9b341 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -281,6 +281,7 @@ wkup_gpio0: gpio@...10000 {
power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 113 0>;
clock-names = "gpio";
+ status = "disabled";
};
wkup_gpio1: gpio@...00000 {
@@ -297,6 +298,7 @@ wkup_gpio1: gpio@...00000 {
power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 114 0>;
clock-names = "gpio";
+ status = "disabled";
};
mcu_i2c0: i2c@...00000 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 4cd5346f2dd59..ed4994d264f26 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -731,41 +731,19 @@ &main_i2c5 {
};
&main_gpio0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&rpi_header_gpio0_pins_default>;
};
&main_gpio1 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&rpi_header_gpio1_pins_default>;
};
-&main_gpio2 {
- status = "disabled";
-};
-
-&main_gpio3 {
- status = "disabled";
-};
-
-&main_gpio4 {
- status = "disabled";
-};
-
-&main_gpio5 {
- status = "disabled";
-};
-
-&main_gpio6 {
- status = "disabled";
-};
-
-&main_gpio7 {
- status = "disabled";
-};
-
-&wkup_gpio1 {
- status = "disabled";
+&wkup_gpio0 {
+ status = "okay";
};
&usb_serdes_mux {
--
2.39.2
Powered by blists - more mailing lists