linux-kernel - Re: [PATCH V3 2/2] mmc: sdhci-pci-o2micro: add Bayhub new chip GG8 support for express card

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAPDyKFry_UPapSSbM2tH7=HcWd5ZSFqNj=ytjwK77jSbKpUgGg@mail.gmail.com>
Date:   Fri, 11 Aug 2023 12:45:39 +0200
From:   Ulf Hansson <ulf.hansson@...aro.org>
To:     Chevron Li <chevron_li@....com>
Cc:     adrian.hunter@...el.com, linux-mmc@...r.kernel.org,
        linux-kernel@...r.kernel.org, shirley.her@...hubtech.com,
        xiaoguang.yu@...hubtech.com, shaper.liu@...hubtech.com,
        Chevron Li <chevron.li@...hubtech.com>
Subject: Re: [PATCH V3 2/2] mmc: sdhci-pci-o2micro: add Bayhub new chip GG8
 support for express card

On Fri, 11 Aug 2023 at 05:36, Chevron Li <chevron_li@....com> wrote:
>
> From: Chevron Li <chevron.li@...hubtech.com>
>
> Add Bayhub new chip GG8 support for SD express card.
> This patch depends on patch 1/2.
>
> Signed-off-by: Chevron Li <chevron.li@...hubtech.com>
> Acked-by: Adrian Hunter <adrian.hunter@...el.com>

Applied for next, thanks!

Kind regards
Uffe


> ---
> Change in V1:
> 1.Implement the SD express card callback routine.
> 2.Add SD express card support for Bayhub GG8 chip.
>
> Change in V2:
> 1.updated some typo in patch and modified title.
> 2.updated patch format according to reviewer's comments.
> 3.updated the logical to try UHSI when express card initializatio failed.
>
> Change in V3:
> Fix the redefine issue.
> ---
>  drivers/mmc/host/sdhci-pci-o2micro.c | 65 +++++++++++++++++++++++++++-
>  1 file changed, 64 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
> index ae2707fbd119..7bfee28116af 100644
> --- a/drivers/mmc/host/sdhci-pci-o2micro.c
> +++ b/drivers/mmc/host/sdhci-pci-o2micro.c
> @@ -21,6 +21,7 @@
>   * O2Micro device registers
>   */
>
> +#define O2_SD_PCIE_SWITCH      0x54
>  #define O2_SD_MISC_REG5                0x64
>  #define O2_SD_LD0_CTRL         0x68
>  #define O2_SD_DEV_CTRL         0x88
> @@ -631,6 +632,67 @@ static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
>         sdhci_o2_enable_clk(host, clk);
>  }
>
> +static int sdhci_pci_o2_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> +       struct sdhci_host *host = mmc_priv(mmc);
> +       struct sdhci_pci_slot *slot = sdhci_priv(host);
> +       struct sdhci_pci_chip *chip = slot->chip;
> +       u8 scratch8;
> +       u16 scratch16;
> +       int ret;
> +
> +       /* Disable clock */
> +       sdhci_writeb(host, 0, SDHCI_CLOCK_CONTROL);
> +
> +       /* Set VDD2 voltage*/
> +       scratch8 = sdhci_readb(host, SDHCI_POWER_CONTROL);
> +       scratch8 &= 0x0F;
> +       if (host->mmc->ios.timing == MMC_TIMING_SD_EXP_1_2V &&
> +           host->mmc->caps2 & MMC_CAP2_SD_EXP_1_2V) {
> +               scratch8 |= SDHCI_VDD2_POWER_ON | SDHCI_VDD2_POWER_120;
> +       } else {
> +               scratch8 |= SDHCI_VDD2_POWER_ON | SDHCI_VDD2_POWER_180;
> +       }
> +
> +       sdhci_writeb(host, scratch8, SDHCI_POWER_CONTROL);
> +
> +       /* UnLock WP */
> +       pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch8);
> +       scratch8 &= 0x7f;
> +       pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch8);
> +
> +       /* Wait for express card clkreqn assert */
> +       ret = read_poll_timeout(sdhci_readb, scratch8, !(scratch8 & BIT(0)),
> +                               1, 30000, false, host, O2_SD_EXP_INT_REG);
> +
> +       if (!ret) {
> +               /* Switch to PCIe mode */
> +               scratch16 = sdhci_readw(host, O2_SD_PCIE_SWITCH);
> +               scratch16 |= BIT(8);
> +               sdhci_writew(host, scratch16, O2_SD_PCIE_SWITCH);
> +       } else {
> +               /* Power off VDD2 voltage*/
> +               scratch8 = sdhci_readb(host, SDHCI_POWER_CONTROL);
> +               scratch8 &= 0x0F;
> +               sdhci_writeb(host, scratch8, SDHCI_POWER_CONTROL);
> +
> +               /* Keep mode as UHSI */
> +               pci_read_config_word(chip->pdev, O2_SD_PARA_SET_REG1, &scratch16);
> +               scratch16 &= ~BIT(11);
> +               pci_write_config_word(chip->pdev, O2_SD_PARA_SET_REG1, scratch16);
> +
> +               host->mmc->ios.timing = MMC_TIMING_LEGACY;
> +               pr_info("%s: Express card initialization failed, falling back to Legacy\n",
> +                       mmc_hostname(host->mmc));
> +       }
> +       /* Lock WP */
> +       pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch8);
> +       scratch8 |= 0x80;
> +       pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch8);
> +
> +       return 0;
> +}
> +
>  static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
>  {
>         struct sdhci_pci_chip *chip;
> @@ -703,10 +765,11 @@ static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
>         case PCI_DEVICE_ID_O2_GG8_9861:
>         case PCI_DEVICE_ID_O2_GG8_9862:
>         case PCI_DEVICE_ID_O2_GG8_9863:
> -               host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
> +               host->mmc->caps2 |= MMC_CAP2_NO_SDIO | MMC_CAP2_SD_EXP | MMC_CAP2_SD_EXP_1_2V;
>                 host->mmc->caps |= MMC_CAP_HW_RESET;
>                 host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
>                 slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd;
> +               host->mmc_host_ops.init_sd_express = sdhci_pci_o2_init_sd_express;
>                 break;
>         default:
>                 break;
> --
> 2.25.1
>