lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230811-upstream_csi-v9-5-8943f7a68a81@ti.com>
Date:   Fri, 11 Aug 2023 16:17:27 +0530
From:   Jai Luthra <j-luthra@...com>
To:     Mauro Carvalho Chehab <mchehab@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Sakari Ailus <sakari.ailus@...ux.intel.com>,
        Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
CC:     <linux-media@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
        Maxime Ripard <mripard@...nel.org>,
        <niklas.soderlund+renesas@...natech.se>,
        Benoit Parrot <bparrot@...com>,
        Vaishnav Achath <vaishnav.a@...com>,
        Vignesh Raghavendra <vigneshr@...com>, <nm@...com>,
        <devarsht@...com>, <j-luthra@...com>, <a-bhatia1@...com>,
        Martyn Welch <martyn.welch@...labora.com>,
        Julien Massot <julien.massot@...labora.com>
Subject: [PATCH v9 05/13] media: cadence: csi2rx: Add get_fmt and set_fmt pad ops

From: Pratyush Yadav <p.yadav@...com>

The format is needed to calculate the link speed for the external DPHY
configuration. It is not right to query the format from the source
subdev. Add get_fmt and set_fmt pad operations so that the format can be
configured and correct bpp be selected.

Initialize and use the v4l2 subdev active state to keep track of the
active formats. Also propagate the new format from the sink pad to all
the source pads.

Signed-off-by: Pratyush Yadav <p.yadav@...com>
Co-authored-by: Jai Luthra <j-luthra@...com>
Reviewed-by: Maxime Ripard <mripard@...nel.org>
Signed-off-by: Jai Luthra <j-luthra@...com>
---
Changes from v8:
    - Squash the patch adding RAW8 and RAW10 formats within this one
    - Single line struct entries in formats[] array
    - Skip specifiying redundant format.which entry in init_cfg()

 drivers/media/platform/cadence/cdns-csi2rx.c | 101 ++++++++++++++++++++++++++-
 1 file changed, 100 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c
index 9de3240e261c..047e74ee2443 100644
--- a/drivers/media/platform/cadence/cdns-csi2rx.c
+++ b/drivers/media/platform/cadence/cdns-csi2rx.c
@@ -61,6 +61,11 @@ enum csi2rx_pads {
 	CSI2RX_PAD_MAX,
 };
 
+struct csi2rx_fmt {
+	u32				code;
+	u8				bpp;
+};
+
 struct csi2rx_priv {
 	struct device			*dev;
 	unsigned int			count;
@@ -95,6 +100,32 @@ struct csi2rx_priv {
 	int				source_pad;
 };
 
+static const struct csi2rx_fmt formats[] = {
+	{ .code	= MEDIA_BUS_FMT_YUYV8_1X16, .bpp = 16, },
+	{ .code	= MEDIA_BUS_FMT_UYVY8_1X16, .bpp = 16, },
+	{ .code	= MEDIA_BUS_FMT_YVYU8_1X16, .bpp = 16, },
+	{ .code	= MEDIA_BUS_FMT_VYUY8_1X16, .bpp = 16, },
+	{ .code	= MEDIA_BUS_FMT_SBGGR8_1X8, .bpp = 8, },
+	{ .code	= MEDIA_BUS_FMT_SGBRG8_1X8, .bpp = 8, },
+	{ .code	= MEDIA_BUS_FMT_SGRBG8_1X8, .bpp = 8, },
+	{ .code	= MEDIA_BUS_FMT_SRGGB8_1X8, .bpp = 8, },
+	{ .code	= MEDIA_BUS_FMT_SBGGR10_1X10, .bpp = 10, },
+	{ .code	= MEDIA_BUS_FMT_SGBRG10_1X10, .bpp = 10, },
+	{ .code	= MEDIA_BUS_FMT_SGRBG10_1X10, .bpp = 10, },
+	{ .code	= MEDIA_BUS_FMT_SRGGB10_1X10, .bpp = 10, },
+};
+
+static const struct csi2rx_fmt *csi2rx_get_fmt_by_code(u32 code)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(formats); i++)
+		if (formats[i].code == code)
+			return &formats[i];
+
+	return NULL;
+}
+
 static inline
 struct csi2rx_priv *v4l2_subdev_to_csi2rx(struct v4l2_subdev *subdev)
 {
@@ -303,12 +334,73 @@ static int csi2rx_s_stream(struct v4l2_subdev *subdev, int enable)
 	return ret;
 }
 
+static int csi2rx_set_fmt(struct v4l2_subdev *subdev,
+			  struct v4l2_subdev_state *state,
+			  struct v4l2_subdev_format *format)
+{
+	struct v4l2_mbus_framefmt *fmt;
+	unsigned int i;
+
+	/* No transcoding, source and sink formats must match. */
+	if (format->pad != CSI2RX_PAD_SINK)
+		return v4l2_subdev_get_fmt(subdev, state, format);
+
+	if (!csi2rx_get_fmt_by_code(format->format.code))
+		format->format.code = formats[0].code;
+
+	format->format.field = V4L2_FIELD_NONE;
+
+	/* Set sink format */
+	fmt = v4l2_subdev_get_pad_format(subdev, state, format->pad);
+	if (!fmt)
+		return -EINVAL;
+
+	*fmt = format->format;
+
+	/* Propagate to source formats */
+	for (i = CSI2RX_PAD_SOURCE_STREAM0; i < CSI2RX_PAD_MAX; i++) {
+		fmt = v4l2_subdev_get_pad_format(subdev, state, i);
+		if (!fmt)
+			return -EINVAL;
+		*fmt = format->format;
+	}
+
+	return 0;
+}
+
+static int csi2rx_init_cfg(struct v4l2_subdev *subdev,
+			   struct v4l2_subdev_state *state)
+{
+	struct v4l2_subdev_format format = {
+		.pad = CSI2RX_PAD_SINK,
+		.format = {
+			.width = 640,
+			.height = 480,
+			.code = MEDIA_BUS_FMT_UYVY8_1X16,
+			.field = V4L2_FIELD_NONE,
+			.colorspace = V4L2_COLORSPACE_SRGB,
+			.ycbcr_enc = V4L2_YCBCR_ENC_601,
+			.quantization = V4L2_QUANTIZATION_LIM_RANGE,
+			.xfer_func = V4L2_XFER_FUNC_SRGB,
+		},
+	};
+
+	return csi2rx_set_fmt(subdev, state, &format);
+}
+
+static const struct v4l2_subdev_pad_ops csi2rx_pad_ops = {
+	.get_fmt	= v4l2_subdev_get_fmt,
+	.set_fmt	= csi2rx_set_fmt,
+	.init_cfg	= csi2rx_init_cfg,
+};
+
 static const struct v4l2_subdev_video_ops csi2rx_video_ops = {
 	.s_stream	= csi2rx_s_stream,
 };
 
 static const struct v4l2_subdev_ops csi2rx_subdev_ops = {
 	.video		= &csi2rx_video_ops,
+	.pad		= &csi2rx_pad_ops,
 };
 
 static int csi2rx_async_bound(struct v4l2_async_notifier *notifier,
@@ -532,9 +624,13 @@ static int csi2rx_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_cleanup;
 
+	ret = v4l2_subdev_init_finalize(&csi2rx->subdev);
+	if (ret)
+		goto err_cleanup;
+
 	ret = v4l2_async_register_subdev(&csi2rx->subdev);
 	if (ret < 0)
-		goto err_cleanup;
+		goto err_free_state;
 
 	dev_info(&pdev->dev,
 		 "Probed CSI2RX with %u/%u lanes, %u streams, %s D-PHY\n",
@@ -544,6 +640,8 @@ static int csi2rx_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_free_state:
+	v4l2_subdev_cleanup(&csi2rx->subdev);
 err_cleanup:
 	v4l2_async_nf_unregister(&csi2rx->notifier);
 	v4l2_async_nf_cleanup(&csi2rx->notifier);
@@ -560,6 +658,7 @@ static void csi2rx_remove(struct platform_device *pdev)
 	v4l2_async_nf_unregister(&csi2rx->notifier);
 	v4l2_async_nf_cleanup(&csi2rx->notifier);
 	v4l2_async_unregister_subdev(&csi2rx->subdev);
+	v4l2_subdev_cleanup(&csi2rx->subdev);
 	media_entity_cleanup(&csi2rx->subdev.entity);
 	kfree(csi2rx);
 }

-- 
2.41.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ