lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <97764bad-7091-e9ed-6f49-d31861fc622f@linux.intel.com>
Date:   Fri, 11 Aug 2023 16:17:41 +0300 (EEST)
From:   Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To:     Arnd Bergmann <arnd@...nel.org>
cc:     Hans de Goede <hdegoede@...hat.com>,
        Mark Gross <markgross@...nel.org>,
        "xingtong.wu" <xingtong.wu@...mens.com>,
        Arnd Bergmann <arnd@...db.de>,
        Nathan Chancellor <nathan@...nel.org>,
        Nick Desaulniers <ndesaulniers@...gle.com>,
        Tom Rix <trix@...hat.com>,
        Henning Schild <henning.schild@...mens.com>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Lee Jones <lee@...nel.org>,
        platform-driver-x86@...r.kernel.org, linux-kernel@...r.kernel.org,
        llvm@...ts.linux.dev
Subject: Re: [PATCH] platform/x86/siemens: simatic-ipc: fix nonsensical
 condition

On Fri, 11 Aug 2023, Arnd Bergmann wrote:

> From: Arnd Bergmann <arnd@...db.de>
> 
> The condition checking for a constant SIMATIC_IPC_DEVICE_BX_59A value
> clearly makes no sense, as clang warns:
> 
> drivers/platform/x86/siemens/simatic-ipc.c:132:42: error: use of logical '||' with constant operand [-Werror,-Wconstant-logical-operand]
>                 if (ledmode == SIMATIC_IPC_DEVICE_227G || SIMATIC_IPC_DEVICE_BX_59A)
>                                                        ^  ~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/platform/x86/siemens/simatic-ipc-batt.c:197:49: error: use of logical '||' with constant operand [-Werror,-Wconstant-logical-operand]
>                 if (priv.devmode == SIMATIC_IPC_DEVICE_BX_21A || SIMATIC_IPC_DEVICE_BX_59A)
>                                                               ^  ~~~~~~~~~~~~~~~~~~~~~~~~~
> 
> Most likely, this was meant to check ledmode to be one of the two values,
> so change it to that.
> 
> Fixes: b8af77951941e ("platform/x86/siemens: simatic-ipc: add new models BX-56A/BX-59A")
> Fixes: c56beff203754 ("platform/x86/siemens: simatic-ipc-batt: add support for module BX-59A")
> Signed-off-by: Arnd Bergmann <arnd@...db.de>
> ---
>  drivers/platform/x86/siemens/simatic-ipc-batt.c | 3 ++-
>  drivers/platform/x86/siemens/simatic-ipc.c      | 3 ++-
>  2 files changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/platform/x86/siemens/simatic-ipc-batt.c b/drivers/platform/x86/siemens/simatic-ipc-batt.c
> index d66b9969234bf..e6c12c52843ca 100644
> --- a/drivers/platform/x86/siemens/simatic-ipc-batt.c
> +++ b/drivers/platform/x86/siemens/simatic-ipc-batt.c
> @@ -194,7 +194,8 @@ int simatic_ipc_batt_probe(struct platform_device *pdev, struct gpiod_lookup_tab
>  
>  	if (table->table[2].key) {
>  		flags = GPIOD_OUT_HIGH;
> -		if (priv.devmode == SIMATIC_IPC_DEVICE_BX_21A || SIMATIC_IPC_DEVICE_BX_59A)
> +		if (priv.devmode == SIMATIC_IPC_DEVICE_BX_21A ||
> +		    priv.devmode == SIMATIC_IPC_DEVICE_BX_59A)
>  			flags = GPIOD_OUT_LOW;
>  		priv.gpios[2] = devm_gpiod_get_index(dev, "CMOSBattery meter", 2, flags);
>  		if (IS_ERR(priv.gpios[2])) {
> diff --git a/drivers/platform/x86/siemens/simatic-ipc.c b/drivers/platform/x86/siemens/simatic-ipc.c
> index 02c540cf40702..e11d28ffac604 100644
> --- a/drivers/platform/x86/siemens/simatic-ipc.c
> +++ b/drivers/platform/x86/siemens/simatic-ipc.c
> @@ -129,7 +129,8 @@ static int register_platform_devices(u32 station_id)
>  		pdevname = KBUILD_MODNAME "_leds";
>  		if (ledmode == SIMATIC_IPC_DEVICE_127E)
>  			pdevname = KBUILD_MODNAME "_leds_gpio_apollolake";
> -		if (ledmode == SIMATIC_IPC_DEVICE_227G || SIMATIC_IPC_DEVICE_BX_59A)
> +		if (ledmode == SIMATIC_IPC_DEVICE_227G ||
> +		    ledmode == SIMATIC_IPC_DEVICE_BX_59A)
>  			pdevname = KBUILD_MODNAME "_leds_gpio_f7188x";
>  		if (ledmode == SIMATIC_IPC_DEVICE_BX_21A)
>  			pdevname = KBUILD_MODNAME "_leds_gpio_elkhartlake";

Thank you for the patch but these are already fixed by commits:

7abf253afa5c ("platform/x86/siemens: simatic-ipc-batt: fix logical error for BX-59A")
b01c1e022f7f ("platform/x86/siemens: simatic-ipc: fix logical error for BX-59A")


-- 
 i.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ