Message-ID: <a34eff4b-37f2-5b96-7be1-9e32c04dd4e0@arm.com>
Date:   Fri, 11 Aug 2023 15:33:59 +0100
From:   Suzuki K Poulose <suzuki.poulose@....com>
To:     Anshuman Khandual <anshuman.khandual@....com>,
        linux-arm-kernel@...ts.infradead.org
Cc:     Mike Leach <mike.leach@...aro.org>,
        James Clark <james.clark@....com>,
        Leo Yan <leo.yan@...aro.org>,
        Alexander Shishkin <alexander.shishkin@...ux.intel.com>,
        coresight@...ts.linaro.org, linux-kernel@...r.kernel.org,
        Steve Clevenger <scclevenger@...amperecomputing.com>
Subject: Re: [PATCH] coresight: tmc: Make etr buffer mode user configurable
 from sysfs

On 28/07/2023 09:48, Anshuman Khandual wrote:
> Currently TMC-ETR automatically selects the buffer mode from all available
> methods in the following sequentially fallback manner - also in that order.
> 
> 1. FLAT mode with or without IOMMU
> 2. TMC-ETR-SG (scatter gather) mode when available
> 3. CATU mode when available
> 
> But this order might not be ideal for all situations. For example if there
> is a CATU connected to ETR, it may be better to use TMC-ETR scatter gather
> method, rather than CATU. 

The statement is wrong.

But hard coding such order changes will prevent
> us from testing or using a particular mode. This change provides following
> new sysfs tunables for the user to control TMC-ETR buffer mode explicitly,
> if required.
> 
> /sys/bus/coresight/devices/tmc_etr<N>/etr_buf_modes_available
> /sys/bus/coresight/devices/tmc_etr<N>/etr_buf_mode_current

Given this only appears for TMC-ETR, could this be simple :

available_buf_modes and

preferred_buf_mode.

We should fall back to the auto logic to use an appropriate mode
if the "perferred" mode cannot satisfy the request. (e.g., flat mode
with a large buffer. This may be possible on a system without much
load).

> $ cat etr_buf_modes_available
> auto flat tmc-sg catu	------------------> Supported TMC-ETR buffer modes
> $ echo catu > etr_buf_mode_current -------> Explicit buffer mode request
> 
> But explicit user request has to be within supported ETR buffer modes only.
> These sysfs interface files are exclussive to ETR, and hence not available
> for other TMC devices such as ETB or ETF etc.


  This required separating out
> new 'coresight_etr_groups' from common 'coresight_tmc_groups'.

strip this, you don't need implementation commentary.

> 
> This adds a new element 'etr_mode' in 'struct tmc_drvdata' which will track
> such explicit user directives.

this too.

  'auto' mode has been added to help fallback
> to the existing default behaviour. 


ETR_MODE_FLAT mode availability follows
> existing logic as in tmc_alloc_etr_buf() creating a common helper function
> i.e etr_supports_flat_mode().

this too.

> 
> Cc: Suzuki K Poulose <suzuki.poulose@....com>
> Cc: Mike Leach <mike.leach@...aro.org>
> Cc: James Clark <james.clark@....com>
> Cc: Leo Yan <leo.yan@...aro.org>
> Cc: Alexander Shishkin <alexander.shishkin@...ux.intel.com>
> Cc: coresight@...ts.linaro.org
> Cc: linux-arm-kernel@...ts.infradead.org
> Cc: linux-kernel@...r.kernel.org
> Signed-off-by: Anshuman Khandual <anshuman.khandual@....com>
> ---
>   .../testing/sysfs-bus-coresight-devices-tmc   |  16 +++
>   .../hwtracing/coresight/coresight-tmc-core.c  | 103 +++++++++++++++++-
>   .../hwtracing/coresight/coresight-tmc-etr.c   |  27 +++--
>   drivers/hwtracing/coresight/coresight-tmc.h   |  10 ++
>   4 files changed, 143 insertions(+), 13 deletions(-)
> 
> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc
> index 6aa527296c71..956a2f090950 100644
> --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc
> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc
> @@ -91,3 +91,19 @@ Contact:	Mathieu Poirier <mathieu.poirier@...aro.org>
>   Description:	(RW) Size of the trace buffer for TMC-ETR when used in SYSFS
>   		mode. Writable only for TMC-ETR configurations. The value
>   		should be aligned to the kernel pagesize.
> +
> +What:		/sys/bus/coresight/devices/<memory_map>.tmc/etr_buf_modes_available
> +Date:		July 2023
> +KernelVersion:	6.6
> +Contact:	Anshuman Khandual <anshuman.khandual@....com>
> +Description:	(Read) Shows all supported Coresight TMC-ETR buffer modes available
> +		for the users to configure explicitly. This file is avaialble only
> +		for TMC ETR devices.
> +
> +What:		/sys/bus/coresight/devices/<memory_map>.tmc/etr_buf_mode_current
> +Date:		July 2023
> +KernelVersion:	6.6
> +Contact:	Anshuman Khandual <anshuman.khandual@....com>
> +Description:	(RW) Current Coresight TMC-ETR buffer mode selected. But user could
> +		only provide a mode which is supported for a given ETR device. This
> +		file is available only for TMC ETR devices.
> diff --git a/drivers/hwtracing/coresight/coresight-tmc-core.c b/drivers/hwtracing/coresight/coresight-tmc-core.c
> index c106d142e632..ce97ff5e0997 100644
> --- a/drivers/hwtracing/coresight/coresight-tmc-core.c
> +++ b/drivers/hwtracing/coresight/coresight-tmc-core.c
> @@ -10,6 +10,7 @@
>   #include <linux/device.h>
>   #include <linux/idr.h>
>   #include <linux/io.h>
> +#include <linux/iommu.h>
>   #include <linux/err.h>
>   #include <linux/fs.h>
>   #include <linux/miscdevice.h>
> @@ -329,6 +330,85 @@ static ssize_t buffer_size_store(struct device *dev,
>   
>   static DEVICE_ATTR_RW(buffer_size);
>   
> +static const char *const buf_modes_str[] = {
> +	[ETR_MODE_FLAT]		= "flat",
> +	[ETR_MODE_ETR_SG]	= "tmc-sg",
> +	[ETR_MODE_CATU]		= "catu",
> +	[ETR_MODE_AUTO]		= "auto",
> +};
> +
> +void get_etr_buf_hw(struct device *dev, struct etr_buf_hw *buf_hw)
> +{
> +	struct tmc_drvdata *drvdata = dev_get_drvdata(dev->parent);
> +
> +	buf_hw->has_iommu = iommu_get_domain_for_dev(dev->parent);
> +	buf_hw->has_etr_sg = tmc_etr_has_cap(drvdata, TMC_ETR_SG);
> +	buf_hw->has_catu = !!tmc_etr_get_catu_device(drvdata);
> +}
> +
> +bool etr_supports_flat_mode(struct etr_buf_hw *buf_hw, ssize_t etr_buf_size)
> +{
> +	bool has_sg = buf_hw->has_catu || buf_hw->has_etr_sg;
> +
> +	return !has_sg || buf_hw->has_iommu || etr_buf_size < SZ_1M;
> +}
> +

Flat mode is always supported and the user must be allowed to "prefer"
it. This logic can be applied to the "auto mode" though and should be
renamed to

etr_can_use_flat_mode(buf_hw, size)



> +static ssize_t etr_buf_modes_available_show(struct device *dev,
> +					    struct device_attribute *attr, char *buf)
> +{
> +	struct tmc_drvdata *drvdata = dev_get_drvdata(dev->parent);
> +	struct etr_buf_hw buf_hw;
> +	ssize_t size = 0;
> +
> +	get_etr_buf_hw(dev, &buf_hw);
> +	size += sysfs_emit(buf, "%s ", buf_modes_str[ETR_MODE_AUTO]);
> +	if (etr_supports_flat_mode(&buf_hw, drvdata->size))
> +		size += sysfs_emit_at(buf, size, "%s ", buf_modes_str[ETR_MODE_FLAT]);

Always supported and must be available

> +
> +	if (buf_hw.has_etr_sg)
> +		size += sysfs_emit_at(buf, size, "%s ", buf_modes_str[ETR_MODE_ETR_SG]);
> +
> +	if (buf_hw.has_catu)
> +		size += sysfs_emit_at(buf, size, "%s ", buf_modes_str[ETR_MODE_CATU]);
> +
> +	size += sysfs_emit_at(buf, size, "\n");
> +	return size;
> +}
> +static DEVICE_ATTR_RO(etr_buf_modes_available);
> +
> +static ssize_t etr_buf_mode_current_show(struct device *dev,
> +					 struct device_attribute *attr, char *buf)
> +{
> +	struct tmc_drvdata *drvdata = dev_get_drvdata(dev->parent);
> +
> +	return sysfs_emit(buf, "%s\n", buf_modes_str[drvdata->etr_mode]);
> +}
> +
> +static ssize_t etr_buf_mode_current_store(struct device *dev,
> +					  struct device_attribute *attr,
> +					  const char *buf, size_t size)
> +{
> +	struct tmc_drvdata *drvdata = dev_get_drvdata(dev->parent);
> +	struct etr_buf_hw buf_hw;
> +
> +	get_etr_buf_hw(dev, &buf_hw);
> +	if (sysfs_streq(buf, buf_modes_str[ETR_MODE_FLAT]) &&
> +	    etr_supports_flat_mode(&buf_hw, drvdata->size))

Please remove this check, given the input is a "preference"

> +		drvdata->etr_mode = ETR_MODE_FLAT;
> +	else if (sysfs_streq(buf, buf_modes_str[ETR_MODE_ETR_SG]) && buf_hw.has_etr_sg)
> +		drvdata->etr_mode = ETR_MODE_ETR_SG;
> +	else if (sysfs_streq(buf, buf_modes_str[ETR_MODE_CATU]) && buf_hw.has_catu)
> +		drvdata->etr_mode = ETR_MODE_CATU;
> +	else if (sysfs_streq(buf, buf_modes_str[ETR_MODE_AUTO]))
> +		drvdata->etr_mode = ETR_MODE_AUTO;
> +	else
> +		return -EINVAL;
> +
> +	return size;
> +
> +}
> +static DEVICE_ATTR_RW(etr_buf_mode_current);
> +
>   static struct attribute *coresight_tmc_attrs[] = {
>   	&dev_attr_trigger_cntr.attr,
>   	&dev_attr_buffer_size.attr,
> @@ -350,6 +430,24 @@ static const struct attribute_group *coresight_tmc_groups[] = {
>   	NULL,
>   };
>   
> +static struct attribute *coresight_etr_attrs[] = {
> +	&dev_attr_trigger_cntr.attr,
> +	&dev_attr_buffer_size.attr,

Why don't we reuse the tmc_attrs in the etr_groups ? That way,
it is much cleaner and easy to reason about. Also rename the
coresight_tmc_groups => coresight_etf_groups (inline with
the driver file name, coresight-tmc-etf.c )


> +	&dev_attr_etr_buf_modes_available.attr,
> +	&dev_attr_etr_buf_mode_current.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group coresight_etr_group = {
> +	.attrs = coresight_etr_attrs,
> +};
> +
> +static const struct attribute_group *coresight_etr_groups[] = {
> +	&coresight_etr_group,

and add:

  +	&coresight_tmc_group,

> +	&coresight_tmc_mgmt_group,
> +	NULL,
> +};
> +

All of the above functions and the coresight_etr_group and related 
attributes could live in coresight-tmc-etr.c and we could simply
expose the coresight_etr_group to the tmc-core.c

That way, the code is all contained in coresight-tmc-etr.c and
you don't have to expose the functions way at the bottom.

>   static inline bool tmc_etr_can_use_sg(struct device *dev)
>   {
>   	return fwnode_property_present(dev->fwnode, "arm,scatter-gather");
> @@ -465,6 +563,7 @@ static int tmc_probe(struct amba_device *adev, const struct amba_id *id)
>   	drvdata->memwidth = tmc_get_memwidth(devid);
>   	/* This device is not associated with a session */
>   	drvdata->pid = -1;
> +	drvdata->etr_mode = ETR_MODE_AUTO;
>   
>   	if (drvdata->config_type == TMC_CONFIG_TYPE_ETR) {
>   		drvdata->size = tmc_etr_get_default_buffer_size(dev);
> @@ -474,16 +573,17 @@ static int tmc_probe(struct amba_device *adev, const struct amba_id *id)
>   	}
>   
>   	desc.dev = dev;
> -	desc.groups = coresight_tmc_groups;
>   
>   	switch (drvdata->config_type) {
>   	case TMC_CONFIG_TYPE_ETB:
> +		desc.groups = coresight_tmc_groups;
>   		desc.type = CORESIGHT_DEV_TYPE_SINK;
>   		desc.subtype.sink_subtype = CORESIGHT_DEV_SUBTYPE_SINK_BUFFER;
>   		desc.ops = &tmc_etb_cs_ops;
>   		dev_list = &etb_devs;
>   		break;
>   	case TMC_CONFIG_TYPE_ETR:
> +		desc.groups = coresight_etr_groups;
>   		desc.type = CORESIGHT_DEV_TYPE_SINK;
>   		desc.subtype.sink_subtype = CORESIGHT_DEV_SUBTYPE_SINK_SYSMEM;
>   		desc.ops = &tmc_etr_cs_ops;
> @@ -496,6 +596,7 @@ static int tmc_probe(struct amba_device *adev, const struct amba_id *id)
>   		dev_list = &etr_devs;
>   		break;
>   	case TMC_CONFIG_TYPE_ETF:
> +		desc.groups = coresight_tmc_groups;
>   		desc.type = CORESIGHT_DEV_TYPE_LINKSINK;
>   		desc.subtype.sink_subtype = CORESIGHT_DEV_SUBTYPE_SINK_BUFFER;
>   		desc.subtype.link_subtype = CORESIGHT_DEV_SUBTYPE_LINK_FIFO;
> diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c
> index 766325de0e29..d48455188243 100644
> --- a/drivers/hwtracing/coresight/coresight-tmc-etr.c
> +++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c
> @@ -841,23 +841,27 @@ static struct etr_buf *tmc_alloc_etr_buf(struct tmc_drvdata *drvdata,
>   					 int node, void **pages)
>   {
>   	int rc = -ENOMEM;
> -	bool has_etr_sg, has_iommu;
> -	bool has_sg, has_catu;
>   	struct etr_buf *etr_buf;
> +	struct etr_buf_hw buf_hw;
>   	struct device *dev = &drvdata->csdev->dev;
>   
> -	has_etr_sg = tmc_etr_has_cap(drvdata, TMC_ETR_SG);
> -	has_iommu = iommu_get_domain_for_dev(dev->parent);
> -	has_catu = !!tmc_etr_get_catu_device(drvdata);
> -
> -	has_sg = has_catu || has_etr_sg;
> -
> +	get_etr_buf_hw(dev, &buf_hw);
>   	etr_buf = kzalloc(sizeof(*etr_buf), GFP_KERNEL);
>   	if (!etr_buf)
>   		return ERR_PTR(-ENOMEM);
>   
>   	etr_buf->size = size;
>   
> +	/* If there is user directive for buffer mode, try that first */
> +	if (drvdata->etr_mode != ETR_MODE_AUTO) {
> +		rc = tmc_etr_mode_alloc_buf(drvdata->etr_mode, drvdata,
> +					    etr_buf, node, pages);

As mentioned above we should fall back to the AUTO mode of action if the
above fails. Given the ETR could be used in sysfs (size via sysfs) vs
perf mode (size via perf aux_buf) and the sizes controlled by different
entities, a tunable set in the sysfs could cause failures.

We should treat the user selection as a "preferred" mode and try that
first. If that is not available, we should fallback to the "auto" logic
(without resetting the preferred mode), skipping the "preferred" mode.
See below.


> +		if (rc) {
> +			kfree(etr_buf);
> +			return ERR_PTR(rc);
> +		}
> +	}
> +
>   	/*
>   	 * If we have to use an existing list of pages, we cannot reliably
>   	 * use a contiguous DMA memory (even if we have an IOMMU). Otherwise,
> @@ -870,14 +874,13 @@ static struct etr_buf *tmc_alloc_etr_buf(struct tmc_drvdata *drvdata,
>   	 * Fallback to available mechanisms.
>   	 *
>   	 */
> -	if (!pages &&
> -	    (!has_sg || has_iommu || size < SZ_1M))
> +	if (!pages && etr_supports_flat_mode(&buf_hw, size))
>   		rc = tmc_etr_mode_alloc_buf(ETR_MODE_FLAT, drvdata,
>   					    etr_buf, node, pages);
> -	if (rc && has_etr_sg)
> +	if (rc && buf_hw.has_etr_sg)
>   		rc = tmc_etr_mode_alloc_buf(ETR_MODE_ETR_SG, drvdata,
>   					    etr_buf, node, pages);
> -	if (rc && has_catu)
> +	if (rc && buf_hw.has_catu)
>   		rc = tmc_etr_mode_alloc_buf(ETR_MODE_CATU, drvdata,
>   					    etr_buf, node, pages);

We could do :

	do {
		if (etr_mode != ETR_MODE_FLAT &&
		    !pages && etr_can_use_flat_mode(buf_hw, size))
			rc = tmc_etr_mode_alloc_buf(ETR_MODE_FLAT, drvdata,
						    etr_buf, node, pages);
		if (!rc)
			break;
		if (etr_mode != ETR_MODE_ETR_SG && buf_hw.has_etr_sg)
			rc = tmc_etr_mode_alloc_buf(ETR_MODE_ETR_SG, drvdata,
						  			    etr_buf, node, pages);
		if (!rc)
			break;
		if (etr_mode != ETR_MODE_ETR_CATU && buf_hw.has_catu)
			rc = tmc_etr_mode_alloc_buf(ETR_MODE_CATU, drvdata,
						etr_buf, node, pages);

	} while (0);



Suzuki



>   	if (rc) {
> diff --git a/drivers/hwtracing/coresight/coresight-tmc.h b/drivers/hwtracing/coresight/coresight-tmc.h
> index b97da39652d2..ca15ccb1d807 100644
> --- a/drivers/hwtracing/coresight/coresight-tmc.h
> +++ b/drivers/hwtracing/coresight/coresight-tmc.h
> @@ -135,6 +135,13 @@ enum etr_mode {
>   	ETR_MODE_FLAT,		/* Uses contiguous flat buffer */
>   	ETR_MODE_ETR_SG,	/* Uses in-built TMC ETR SG mechanism */
>   	ETR_MODE_CATU,		/* Use SG mechanism in CATU */
> +	ETR_MODE_AUTO,		/* Use the default mechanism */
> +};
> +
> +struct etr_buf_hw {
> +	bool	has_iommu;
> +	bool	has_etr_sg;
> +	bool	has_catu;
>   };
>   
>   struct etr_buf_operations;
> @@ -207,6 +214,7 @@ struct tmc_drvdata {
>   	enum tmc_mem_intf_width	memwidth;
>   	u32			trigger_cntr;
>   	u32			etr_caps;
> +	enum etr_mode		etr_mode;
>   	struct idr		idr;
>   	struct mutex		idr_mutex;
>   	struct etr_buf		*sysfs_buf;
> @@ -334,5 +342,7 @@ void tmc_etr_set_catu_ops(const struct etr_buf_operations *catu);
>   void tmc_etr_remove_catu_ops(void);
>   struct etr_buf *tmc_etr_get_buffer(struct coresight_device *csdev,
>   				   enum cs_mode mode, void *data);
> +void get_etr_buf_hw(struct device *dev, struct etr_buf_hw *buf_hw);
> +bool etr_supports_flat_mode(struct etr_buf_hw *buf_hw, ssize_t etr_buf_size);
>   
>   #endif

Powered by blists - more mailing lists