[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230813160936.1082758-1-sashal@kernel.org>
Date: Sun, 13 Aug 2023 12:09:12 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: Adrien Thierry <athierry@...hat.com>,
Vinod Koul <vkoul@...nel.org>, Sasha Levin <sashal@...nel.org>,
agross@...nel.org, andersson@...nel.org, konrad.dybcio@...aro.org,
kishon@...nel.org, linux-arm-msm@...r.kernel.org,
linux-phy@...ts.infradead.org
Subject: [PATCH AUTOSEL 5.10 01/25] phy: qcom-snps-femto-v2: keep cfg_ahb_clk enabled during runtime suspend
From: Adrien Thierry <athierry@...hat.com>
[ Upstream commit 45d89a344eb46db9dce851c28e14f5e3c635c251 ]
In the dwc3 core, both system and runtime suspend end up calling
dwc3_suspend_common(). From there, what happens for the PHYs depends on
the USB mode and whether the controller is entering system or runtime
suspend.
HOST mode:
(1) system suspend on a non-wakeup-capable controller
The [1] if branch is taken. dwc3_core_exit() is called, which ends up
calling phy_power_off() and phy_exit(). Those two functions decrease the
PM runtime count at some point, so they will trigger the PHY runtime
sleep (assuming the count is right).
(2) runtime suspend / system suspend on a wakeup-capable controller
The [1] branch is not taken. dwc3_suspend_common() calls
phy_pm_runtime_put_sync(). Assuming the ref count is right, the PHY
runtime suspend op is called.
DEVICE mode:
dwc3_core_exit() is called on both runtime and system sleep
unless the controller is already runtime suspended.
OTG mode:
(1) system suspend : dwc3_core_exit() is called
(2) runtime suspend : do nothing
In host mode, the code seems to make a distinction between 1) runtime
sleep / system sleep for wakeup-capable controller, and 2) system sleep
for non-wakeup-capable controller, where phy_power_off() and phy_exit()
are only called for the latter. This suggests the PHY is not supposed to
be in a fully powered-off state for runtime sleep and system sleep for
wakeup-capable controller.
Moreover, downstream, cfg_ahb_clk only gets disabled for system suspend.
The clocks are disabled by phy->set_suspend() [2] which is only called
in the system sleep path through dwc3_core_exit() [3].
With that in mind, don't disable the clocks during the femto PHY runtime
suspend callback. The clocks will only be disabled during system suspend
for non-wakeup-capable controllers, through dwc3_core_exit().
[1] https://elixir.bootlin.com/linux/v6.4/source/drivers/usb/dwc3/core.c#L1988
[2] https://git.codelinaro.org/clo/la/kernel/msm-5.4/-/blob/LV.AU.1.2.1.r2-05300-gen3meta.0/drivers/usb/phy/phy-msm-snps-hs.c#L524
[3] https://git.codelinaro.org/clo/la/kernel/msm-5.4/-/blob/LV.AU.1.2.1.r2-05300-gen3meta.0/drivers/usb/dwc3/core.c#L1915
Signed-off-by: Adrien Thierry <athierry@...hat.com>
Link: https://lore.kernel.org/r/20230629144542.14906-2-athierry@redhat.com
Signed-off-by: Vinod Koul <vkoul@...nel.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
index 7e61202aa234e..a107f98c662d5 100644
--- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
+++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
@@ -122,22 +122,13 @@ static int qcom_snps_hsphy_suspend(struct qcom_snps_hsphy *hsphy)
0, USB2_AUTO_RESUME);
}
- clk_disable_unprepare(hsphy->cfg_ahb_clk);
return 0;
}
static int qcom_snps_hsphy_resume(struct qcom_snps_hsphy *hsphy)
{
- int ret;
-
dev_dbg(&hsphy->phy->dev, "Resume QCOM SNPS PHY, mode\n");
- ret = clk_prepare_enable(hsphy->cfg_ahb_clk);
- if (ret) {
- dev_err(&hsphy->phy->dev, "failed to enable cfg ahb clock\n");
- return ret;
- }
-
return 0;
}
--
2.40.1
Powered by blists - more mailing lists