linux-kernel - [PATCH v4 2/3] dt-bindings: usb: snps,dwc3: Add runtime-suspend-on-usb-suspend property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230814185043.9252-3-quic_eserrao@quicinc.com>
Date:   Mon, 14 Aug 2023 11:50:42 -0700
From:   Elson Roy Serrao <quic_eserrao@...cinc.com>
To:     gregkh@...uxfoundation.org, Thinh.Nguyen@...opsys.com,
        rogerq@...nel.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
        devicetree@...r.kernel.org
Cc:     linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
        Elson Roy Serrao <quic_eserrao@...cinc.com>
Subject: [PATCH v4 2/3] dt-bindings: usb: snps,dwc3: Add runtime-suspend-on-usb-suspend property

This property allows dwc3 runtime suspend when bus suspend interrupt
is received even with cable connected. This would allow the dwc3
controller to enter low power mode during bus suspend scenario.

This property would particularly benefit dwc3 IPs where hibernation is
not enabled and the dwc3 low power mode entry/exit is handled by the
glue driver. The assumption here is that the platform using this dt
property is capable of detecting resume events to bring the controller
out of suspend.

Signed-off-by: Elson Roy Serrao <quic_eserrao@...cinc.com>
---
 Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index a696f23730d3..e19a60d06d2b 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -403,6 +403,11 @@ properties:
     description:
       Enable USB remote wakeup.
 
+  snps,runtime-suspend-on-usb-suspend:
+    description:
+      If True then dwc3 runtime suspend is allowed during bus suspend
+      case even with the USB cable connected.
+
 unevaluatedProperties: false
 
 required:
-- 
2.17.1