linux-kernel - [PATCH v4 0/9] Add legacy i.MX PCIe EP mode supports

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1691991767-15809-1-git-send-email-hongxing.zhu@nxp.com>
Date:   Mon, 14 Aug 2023 13:42:38 +0800
From:   Richard Zhu <hongxing.zhu@....com>
To:     frank.li@....com, l.stach@...gutronix.de, shawnguo@...nel.org,
        lpieralisi@...nel.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org
Cc:     hongxing.zhu@....com, linux-pci@...r.kernel.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, kernel@...gutronix.de,
        linux-imx@....com
Subject: [PATCH v4 0/9] Add legacy i.MX PCIe EP mode supports

Add legacy 32bit i.MX PCIe EP mode support

The PCI controller contained in i.MX6/7 legacy SOCs is one dual mode
PCIe controller, and can work either as RC or EP.

This series add i.MX6/7 PCIe EP mode supports. And had been verified
on i.MX6 sabresd and i.MX7 SDB boards.

In the verification, one board PCIe is used as RC, the other one is used
as EP.
Use the cross TX/RX differential cable connect the two PCIe ports of
these two boards.

+-----------+                +------------+
|   PCIe TX |<-------------->|PCIe RX     |
|           |                |            |
|    Board  |                |    Board   |
|           |                |            |
|   PCIe RX |<-------------->|PCIe TX     |
+-----------+                +------------+

Changes from v3 to v4:
Add Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
into number 8 and 9 patches. Thanks.

Changes from v2 to v3:
Add Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
into dt-binding patches. Thanks.

Changes from v1 to v2:
Refer to Frank's comments:
To simple .get_features codes, add "const struct pci_epc_features"
*epc_features in drvdata. Thanks.

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml | 50 +++++++++++++++++++++++++++++++++++++++++----
arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi                       | 14 +++++++++++++
arch/arm/boot/dts/nxp/imx/imx6qp.dtsi                        |  4 ++++
arch/arm/boot/dts/nxp/imx/imx6sx.dtsi                        | 17 +++++++++++++++
arch/arm/boot/dts/nxp/imx/imx7d.dtsi                         | 27 ++++++++++++++++++++++++
drivers/pci/controller/dwc/pci-imx6.c                        | 93 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
6 files changed, 201 insertions(+), 4 deletions(-)

[PATCH v4 1/9] dt-bindings: PCI: fsl,imx6q: Add i.MX6Q and i.MX6QP
[PATCH v4 2/9] dt-bindings: PCI: fsl,imx6q: Add i.MX6SX PCIe EP
[PATCH v4 3/9] dt-bindings: PCI: fsl,imx6q: Add i.MX7D PCIe EP
[PATCH v4 4/9] arm: dts: nxp: Add i.MX6QDL and i.MX6QP PCIe EP
[PATCH v4 5/9] arm: dts: nxp: Add i.MX6SX PCIe EP support
[PATCH v4 6/9] arm: dts: nxp: Add i.MX7D PCIe EP support
[PATCH v4 7/9] PCI: imx6: Add i.MX6Q and i.MX6QP PCIe EP supports
[PATCH v4 8/9] PCI: imx6: Add i.MX6SX PCIe EP support
[PATCH v4 9/9] PCI: imx6: Add i.MX7D PCIe EP support