[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <7c05f889-acee-4ef7-7fce-c30baa760138@linaro.org>
Date: Mon, 14 Aug 2023 12:01:59 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Varadarajan Narayanan <quic_varada@...cinc.com>, agross@...nel.org,
andersson@...nel.org, konrad.dybcio@...aro.org, vkoul@...nel.org,
kishon@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
catalin.marinas@....com, will@...nel.org, p.zabel@...gutronix.de,
arnd@...db.de, geert+renesas@...der.be, nfraprado@...labora.com,
rafal@...ecki.pl, peng.fan@....com, quic_srichara@...cinc.com,
linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v7 3/5] arm64: dts: qcom: ipq5332: Add USB related nodes
On 10/08/2023 11:56, Varadarajan Narayanan wrote:
> Add USB phy and controller nodes.
>
> Signed-off-by: Varadarajan Narayanan <quic_varada@...cinc.com>
> ---
> v6:
> Remove clock names
> Move the nodes to address sorted location
> v5:
> Use generic phy instead of usb-phy
> 'make CHECK_DTBS=y DT_SCHEMA_FILES=qcom dtbs_check' passed
> 'DT_CHECKER_FLAGS='-v -m' DT_SCHEMA_FILES=qcom dt_binding_check' passed
> v4:
> Change node name
> Remove blank line
> 'make CHECK_DTBS=y DT_SCHEMA_FILES=qcom qcom/ipq5332-rdp441.dtb' passed
> v1:
> Rename phy node
> Change compatible from m31,ipq5332-usb-hsphy -> qcom,ipq5332-usb-hsphy
> Remove 'qscratch' from phy node
> Fix alignment and upper-case hex no.s
> Add clock definition for the phy
> Remove snps,ref-clock-period-ns as it is not used. dwc3_ref_clk_period()
> in dwc3/core.c takes the frequency from ref clock and calculates fladj
> as appropriate.
> ---
> arch/arm64/boot/dts/qcom/ipq5332.dtsi | 55 +++++++++++++++++++++++++++++++++++
> 1 file changed, 55 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> index 8bfc2db..c45d9d4 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> @@ -145,6 +145,19 @@
> #size-cells = <1>;
> ranges = <0 0 0 0xffffffff>;
>
> + usbphy0: phy@...00 {
> + compatible = "qcom,ipq5332-usb-hsphy";
> + reg = <0x0007b000 0x12c>;
> +
> + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
> +
> + resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
> +
> + #phy-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> qfprom: efuse@...00 {
> compatible = "qcom,ipq5332-qfprom", "qcom,qfprom";
> reg = <0x000a4000 0x721>;
> @@ -290,6 +303,48 @@
> status = "disabled";
> };
>
> + usb: usb2@...0000 {
usb@
Node names must be generic.
> + compatible = "qcom,ipq5332-dwc3", "qcom,dwc3";
> + reg = <0x08af8800 0x400>;
OK, so this was not really checked for any warnings.
It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).
Best regards,
Krzysztof
Powered by blists - more mailing lists