[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230814150534.epuluw2gfldrtgnl@skbuf>
Date: Mon, 14 Aug 2023 18:05:34 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: Arınç ÜNAL <arinc.unal@...nc9.com>
Cc: Daniel Golle <daniel@...rotopia.org>,
Landen Chao <Landen.Chao@...iatek.com>,
DENG Qingfang <dqfext@...il.com>,
Sean Wang <sean.wang@...iatek.com>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Bartel Eerdekens <bartel.eerdekens@...stell8.be>,
mithat.guner@...ont.com, erkin.bozoglu@...ont.com,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH net] net: dsa: mt7530: fix handling of 802.1X PAE frames
On Sun, Aug 13, 2023 at 01:59:17PM +0300, Arınç ÜNAL wrote:
> 802.1X PAE frames are link-local frames, therefore they must be trapped to
> the CPU port. Currently, the MT753X switches treat 802.1X PAE frames as
> regular multicast frames, therefore flooding them to user ports. To fix
> this, set 802.1X PAE frames to be trapped to the CPU port(s).
>
> Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
> Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
> ---
> drivers/net/dsa/mt7530.c | 4 ++++
> drivers/net/dsa/mt7530.h | 2 ++
> 2 files changed, 6 insertions(+)
>
> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
> index 38b3c6dda386..b8bb9f3b3609 100644
> --- a/drivers/net/dsa/mt7530.c
> +++ b/drivers/net/dsa/mt7530.c
> @@ -1006,6 +1006,10 @@ mt753x_trap_frames(struct mt7530_priv *priv)
> mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
> MT753X_BPDU_CPU_ONLY);
>
> + /* Trap 802.1X PAE frames to the CPU port(s) */
> + mt7530_rmw(priv, MT753X_BPC, MT753X_PAE_PORT_FW_MASK,
> + MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY));
> +
In the interest of efficiency, this could have been merged with the
previous write to MT753X_BPC, which would save some MDIO transactions:
mt7530_rmw(priv, MT753X_BPC,
MT753X_BPDU_PORT_FW_MASK | MT753X_PAE_PORT_FW_MASK,
MT753X_BPDU_CPU_ONLY |
MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY));
In the interest of readability, this is probably fine too.
Reviewed-by: Vladimir Oltean <olteanv@...il.com>
> /* Trap LLDP frames with :0E MAC DA to the CPU port(s) */
> mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_PORT_FW_MASK,
> MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY));
> diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
> index 08045b035e6a..17e42d30fff4 100644
> --- a/drivers/net/dsa/mt7530.h
> +++ b/drivers/net/dsa/mt7530.h
> @@ -66,6 +66,8 @@ enum mt753x_id {
> /* Registers for BPDU and PAE frame control*/
> #define MT753X_BPC 0x24
> #define MT753X_BPDU_PORT_FW_MASK GENMASK(2, 0)
> +#define MT753X_PAE_PORT_FW_MASK GENMASK(18, 16)
> +#define MT753X_PAE_PORT_FW(x) FIELD_PREP(MT753X_PAE_PORT_FW_MASK, x)
>
> /* Register for :03 and :0E MAC DA frame control */
> #define MT753X_RGAC2 0x2c
> --
> 2.39.2
>
Powered by blists - more mailing lists