| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230815064917.387235-2-quic_fenglinw@quicinc.com>
Date: Tue, 15 Aug 2023 14:49:15 +0800
From: Fenglin Wu <quic_fenglinw@...cinc.com>
To: <linux-arm-msm@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <robh+dt@...nel.org>,
<agross@...nel.org>, <andersson@...nel.org>,
<dmitry.baryshkov@...aro.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
<linux-input@...r.kernel.org>
CC: <quic_collinsd@...cinc.com>, <quic_subbaram@...cinc.com>,
<quic_fenglinw@...cinc.com>, <quic_kamalw@...cinc.com>,
<jestar@....qualcomm.com>
Subject: [PATCH v6 1/3] input: pm8xxx-vib: refactor to easily support new SPMI vibrator
Currently, all vibrator control register addresses are hard coded,
including the base address and the offset, it's not flexible to support
new SPMI vibrator module which is usually included in different PMICs
with different base address. Refactor this by defining register offset
with HW type combination, and register base address which is defined
in 'reg' property is added for SPMI vibrators.
Signed-off-by: Fenglin Wu <quic_fenglinw@...cinc.com>
---
drivers/input/misc/pm8xxx-vibrator.c | 122 ++++++++++++++++-----------
1 file changed, 73 insertions(+), 49 deletions(-)
diff --git a/drivers/input/misc/pm8xxx-vibrator.c b/drivers/input/misc/pm8xxx-vibrator.c
index 04cb87efd799..d6b468324c77 100644
--- a/drivers/input/misc/pm8xxx-vibrator.c
+++ b/drivers/input/misc/pm8xxx-vibrator.c
@@ -12,36 +12,44 @@
#include <linux/regmap.h>
#include <linux/slab.h>
+#define SSBL_VIB_DRV_REG 0x4A
+#define SSBI_VIB_DRV_EN_MANUAL_MASK GENMASK(7, 2)
+#define SSBI_VIB_DRV_LEVEL_MASK GENMASK(7, 3)
+#define SSBI_VIB_DRV_SHIFT 3
+
+#define SPMI_VIB_DRV_REG 0x41
+#define SPMI_VIB_DRV_LEVEL_MASK GENMASK(4, 0)
+#define SPMI_VIB_DRV_SHIFT 0
+
+#define SPMI_VIB_EN_REG 0x46
+#define SPMI_VIB_EN_BIT BIT(7)
+
#define VIB_MAX_LEVEL_mV (3100)
#define VIB_MIN_LEVEL_mV (1200)
#define VIB_MAX_LEVELS (VIB_MAX_LEVEL_mV - VIB_MIN_LEVEL_mV)
#define MAX_FF_SPEED 0xff
-struct pm8xxx_regs {
- unsigned int enable_addr;
- unsigned int enable_mask;
+enum vib_hw_type {
+ SSBI_VIB,
+ SPMI_VIB,
+};
- unsigned int drv_addr;
- unsigned int drv_mask;
- unsigned int drv_shift;
- unsigned int drv_en_manual_mask;
+struct pm8xxx_vib_data {
+ enum vib_hw_type hw_type;
+ unsigned int enable_addr;
+ unsigned int drv_addr;
};
-static const struct pm8xxx_regs pm8058_regs = {
- .drv_addr = 0x4A,
- .drv_mask = 0xf8,
- .drv_shift = 3,
- .drv_en_manual_mask = 0xfc,
+static const struct pm8xxx_vib_data ssbi_vib_data = {
+ .hw_type = SSBI_VIB,
+ .drv_addr = SSBL_VIB_DRV_REG,
};
-static struct pm8xxx_regs pm8916_regs = {
- .enable_addr = 0xc046,
- .enable_mask = BIT(7),
- .drv_addr = 0xc041,
- .drv_mask = 0x1F,
- .drv_shift = 0,
- .drv_en_manual_mask = 0,
+static const struct pm8xxx_vib_data spmi_vib_data = {
+ .hw_type = SPMI_VIB,
+ .enable_addr = SPMI_VIB_EN_REG,
+ .drv_addr = SPMI_VIB_DRV_REG,
};
/**
@@ -49,7 +57,8 @@ static struct pm8xxx_regs pm8916_regs = {
* @vib_input_dev: input device supporting force feedback
* @work: work structure to set the vibration parameters
* @regmap: regmap for register read/write
- * @regs: registers' info
+ * @data: vibrator HW info
+ * @reg_base: the register base of the module
* @speed: speed of vibration set from userland
* @active: state of vibrator
* @level: level of vibration to set in the chip
@@ -59,7 +68,8 @@ struct pm8xxx_vib {
struct input_dev *vib_input_dev;
struct work_struct work;
struct regmap *regmap;
- const struct pm8xxx_regs *regs;
+ const struct pm8xxx_vib_data *data;
+ unsigned int reg_base;
int speed;
int level;
bool active;
@@ -75,24 +85,31 @@ static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on)
{
int rc;
unsigned int val = vib->reg_vib_drv;
- const struct pm8xxx_regs *regs = vib->regs;
+ u32 mask = SPMI_VIB_DRV_LEVEL_MASK;
+ u32 shift = SPMI_VIB_DRV_SHIFT;
+
+ if (vib->data->hw_type == SSBI_VIB) {
+ mask = SSBI_VIB_DRV_LEVEL_MASK;
+ shift = SSBI_VIB_DRV_SHIFT;
+ }
if (on)
- val |= (vib->level << regs->drv_shift) & regs->drv_mask;
+ val |= (vib->level << shift) & mask;
else
- val &= ~regs->drv_mask;
+ val &= ~mask;
- rc = regmap_write(vib->regmap, regs->drv_addr, val);
+ rc = regmap_update_bits(vib->regmap, vib->reg_base + vib->data->drv_addr, mask, val);
if (rc < 0)
return rc;
vib->reg_vib_drv = val;
- if (regs->enable_mask)
- rc = regmap_update_bits(vib->regmap, regs->enable_addr,
- regs->enable_mask, on ? ~0 : 0);
+ if (vib->data->hw_type == SSBI_VIB)
+ return 0;
- return rc;
+ mask = SPMI_VIB_EN_BIT;
+ val = on ? SPMI_VIB_EN_BIT : 0;
+ return regmap_update_bits(vib->regmap, vib->reg_base + vib->data->enable_addr, mask, val);
}
/**
@@ -102,13 +119,6 @@ static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on)
static void pm8xxx_work_handler(struct work_struct *work)
{
struct pm8xxx_vib *vib = container_of(work, struct pm8xxx_vib, work);
- const struct pm8xxx_regs *regs = vib->regs;
- int rc;
- unsigned int val;
-
- rc = regmap_read(vib->regmap, regs->drv_addr, &val);
- if (rc < 0)
- return;
/*
* pmic vibrator supports voltage ranges from 1.2 to 3.1V, so
@@ -168,9 +178,9 @@ static int pm8xxx_vib_probe(struct platform_device *pdev)
{
struct pm8xxx_vib *vib;
struct input_dev *input_dev;
+ const struct pm8xxx_vib_data *data;
int error;
- unsigned int val;
- const struct pm8xxx_regs *regs;
+ unsigned int val, reg_base;
vib = devm_kzalloc(&pdev->dev, sizeof(*vib), GFP_KERNEL);
if (!vib)
@@ -187,19 +197,33 @@ static int pm8xxx_vib_probe(struct platform_device *pdev)
INIT_WORK(&vib->work, pm8xxx_work_handler);
vib->vib_input_dev = input_dev;
- regs = of_device_get_match_data(&pdev->dev);
+ data = of_device_get_match_data(&pdev->dev);
+ if (!data)
+ return -EINVAL;
- /* operate in manual mode */
- error = regmap_read(vib->regmap, regs->drv_addr, &val);
- if (error < 0)
- return error;
+ if (data->hw_type != SSBI_VIB) {
+ error = fwnode_property_read_u32(pdev->dev.fwnode, "reg", ®_base);
+ if (error < 0) {
+ dev_err(&pdev->dev, "Failed to read reg address, rc=%d\n", error);
+ return error;
+ }
+
+ vib->reg_base += reg_base;
+ }
- val &= regs->drv_en_manual_mask;
- error = regmap_write(vib->regmap, regs->drv_addr, val);
+ error = regmap_read(vib->regmap, vib->reg_base + data->drv_addr, &val);
if (error < 0)
return error;
- vib->regs = regs;
+ /* operate in manual mode */
+ if (data->hw_type == SSBI_VIB) {
+ val &= SSBI_VIB_DRV_EN_MANUAL_MASK;
+ error = regmap_write(vib->regmap, vib->reg_base + data->drv_addr, val);
+ if (error < 0)
+ return error;
+ }
+
+ vib->data = data;
vib->reg_vib_drv = val;
input_dev->name = "pm8xxx_vib_ffmemless";
@@ -239,9 +263,9 @@ static int pm8xxx_vib_suspend(struct device *dev)
static DEFINE_SIMPLE_DEV_PM_OPS(pm8xxx_vib_pm_ops, pm8xxx_vib_suspend, NULL);
static const struct of_device_id pm8xxx_vib_id_table[] = {
- { .compatible = "qcom,pm8058-vib", .data = &pm8058_regs },
- { .compatible = "qcom,pm8921-vib", .data = &pm8058_regs },
- { .compatible = "qcom,pm8916-vib", .data = &pm8916_regs },
+ { .compatible = "qcom,pm8058-vib", .data = &ssbi_vib_data },
+ { .compatible = "qcom,pm8921-vib", .data = &ssbi_vib_data },
+ { .compatible = "qcom,pm8916-vib", .data = &spmi_vib_data },
{ }
};
MODULE_DEVICE_TABLE(of, pm8xxx_vib_id_table);
--
2.25.1
Powered by blists - more mailing lists