linux-kernel - [PATCH v3 1/4] dt-bindings: firmware: qcom,scm: support indicating SDI default state

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 16 Aug 2023 18:45:38 +0200
From:   Robert Marko <robimarko@...il.com>
To:     agross@...nel.org, andersson@...nel.org, konrad.dybcio@...aro.org,
        robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
        conor+dt@...nel.org, quic_gurus@...cinc.com,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, quic_mojha@...cinc.com
Cc:     computersforpeace@...il.com, Robert Marko <robimarko@...il.com>
Subject: [PATCH v3 1/4] dt-bindings: firmware: qcom,scm: support indicating SDI default state

IPQ5018 has SDI (Secure Debug Image) enabled by TZ by default, and that
means that WDT being asserted or just trying to reboot will hang the board
in the debug mode and only pulling the power and repowering will help.
Some IPQ4019 boards like Google WiFI have it enabled as well.

So, lets add a boolean property to indicate that SDI is enabled by default
and thus needs to be disabled by the kernel.

Signed-off-by: Robert Marko <robimarko@...il.com>
---
Changes in v3:
* Change the property so it indicates that SDI has been enabled by default
---
 Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
index 4233ea839bfc..590bbbd61de5 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -89,6 +89,14 @@ properties:
       protocol to handle sleeping SCM calls.
     maxItems: 1
 
+  qcom,sdi-enabled:
+    description:
+      Indicates that the SDI (Secure Debug Image) has been enabled by TZ
+      by default and it needs to be disabled.
+      If not disabled WDT assertion or reboot will cause the board to hang
+      in the debug mode.
+    type: boolean
+
   qcom,dload-mode:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-- 
2.41.0