[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <076196e4-36e5-4a90-b3cc-b0ffd61627a3@quicinc.com>
Date: Wed, 16 Aug 2023 11:54:13 +0530
From: Pavan Kondeti <quic_pkondeti@...cinc.com>
To: Krishna chaitanya chundru <quic_krichai@...cinc.com>
CC: <manivannan.sadhasivam@...aro.org>, <helgaas@...nel.org>,
<linux-pci@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <quic_vbadigan@...cinc.com>,
<quic_nitegupt@...cinc.com>, <quic_skananth@...cinc.com>,
<quic_ramkri@...cinc.com>, <quic_parass@...cinc.com>,
<krzysztof.kozlowski@...aro.org>, Andy Gross <agross@...nel.org>,
"Bjorn Andersson" <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Manivannan Sadhasivam <mani@...nel.org>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Rob Herring <robh@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>
Subject: Re: [PATCH v1 3/3] PCI: qcom: Add OPP suuport for speed based
performance state of RPMH
On Tue, Aug 15, 2023 at 05:56:48PM +0530, Krishna chaitanya chundru wrote:
> Before link training vote for the maximum performance state of RPMH
> and once the link is up, vote for the performance state based upon
> the link speed.
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@...cinc.com>
> ---
> drivers/pci/controller/dwc/pcie-qcom.c | 61 ++++++++++++++++++++++++++++++++++
> 1 file changed, 61 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 7a87a47..e29a986 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -22,6 +22,7 @@
> #include <linux/of_device.h>
> #include <linux/of_gpio.h>
> #include <linux/pci.h>
> +#include <linux/pm_opp.h>
> #include <linux/pm_runtime.h>
> #include <linux/platform_device.h>
> #include <linux/phy/pcie.h>
> @@ -1357,6 +1358,51 @@ static int qcom_pcie_icc_init(struct qcom_pcie *pcie)
> return 0;
> }
>
> +static void qcom_pcie_opp_update(struct qcom_pcie *pcie)
> +{
> + struct dw_pcie *pci = pcie->pci;
> + struct dev_pm_opp *opp;
> + u32 offset, status;
> + uint32_t freq;
> + int speed;
> + int ret = 0;
> +
> + offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> + status = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA);
> +
> + /* Only update constraints if link is up. */
> + if (!(status & PCI_EXP_LNKSTA_DLLLA))
> + return;
> +
> + speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, status);
> +
> + switch (speed) {
> + case 1:
> + freq = 2500000;
> + break;
> + case 2:
> + freq = 5000000;
> + break;
> + case 3:
> + freq = 8000000;
> + break;
> + default:
> + WARN_ON_ONCE(1);
> + fallthrough;
> + case 4:
> + freq = 16000000;
> + break;
> + }
> +
> + opp = dev_pm_opp_find_freq_exact(pci->dev, freq, true);
> +
> + if (!IS_ERR(opp)) {
> + ret = dev_pm_opp_get_voltage(opp);
> + dev_pm_opp_put(opp);
> + }
> +
Where are we setting the OPP here?
> +}
> +
> static void qcom_pcie_icc_update(struct qcom_pcie *pcie)
> {
> struct dw_pcie *pci = pcie->pci;
> @@ -1439,8 +1485,10 @@ static void qcom_pcie_init_debugfs(struct qcom_pcie *pcie)
> static int qcom_pcie_probe(struct platform_device *pdev)
> {
> const struct qcom_pcie_cfg *pcie_cfg;
> + unsigned long max_freq = INT_MAX;
> struct device *dev = &pdev->dev;
> struct qcom_pcie *pcie;
> + struct dev_pm_opp *opp;
> struct dw_pcie_rp *pp;
> struct resource *res;
> struct dw_pcie *pci;
> @@ -1511,6 +1559,17 @@ static int qcom_pcie_probe(struct platform_device *pdev)
> if (ret)
> goto err_pm_runtime_put;
>
> + /* OPP table is optional */
> + ret = devm_pm_opp_of_add_table(dev);
> + if (ret && ret != -ENODEV) {
> + dev_err(dev, "Invalid OPP table in Device tree\n");
> + goto err_pm_runtime_put;
> + }
> +
> + opp = dev_pm_opp_find_freq_floor(dev, &max_freq);
> + if (!IS_ERR(opp))
> + dev_pm_opp_put(opp);
> +
This OPP (corresponding to max freq) is not used, so how are we voting
for max perf state during probe?
> ret = pcie->cfg->ops->get_resources(pcie);
> if (ret)
> goto err_pm_runtime_put;
> @@ -1531,6 +1590,8 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>
> qcom_pcie_icc_update(pcie);
>
> + qcom_pcie_opp_update(pcie);
> +
commit description says, OPP voting is done as per the link speed after
probe? I don't see any calls to qcom_pcie_opp_update() outside probe.
> if (pcie->mhi)
> qcom_pcie_init_debugfs(pcie);
>
>
Thanks,
Pavan
Powered by blists - more mailing lists