linux-kernel - Re: [PATCH 2/3] ARM: dts: st: move leds out of soc in stih418-b2264.dts

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <35b63303-07ee-9c8c-6e33-f970fc244441@foss.st.com>
Date:   Wed, 16 Aug 2023 09:16:35 +0200
From:   Patrice CHOTARD <patrice.chotard@...s.st.com>
To:     Alain Volmat <avolmat@...com>, Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>
CC:     <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/3] ARM: dts: st: move leds out of soc in
 stih418-b2264.dts



On 8/16/23 09:16, Patrice CHOTARD wrote:
> 
> 
> On 7/2/23 18:19, Alain Volmat wrote:
>> Move the leds node out of the soc section
>> and correct the following warning:
>> Warning (simple_bus_reg): /soc/leds: missing or empty reg/ranges property
>>
>> Signed-off-by: Alain Volmat <avolmat@...com>
>> ---
>>  arch/arm/boot/dts/st/stih418-b2264.dts | 14 +++++++-------
>>  1 file changed, 7 insertions(+), 7 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/st/stih418-b2264.dts b/arch/arm/boot/dts/st/stih418-b2264.dts
>> index f496ca28850d..d4874282cfba 100644
>> --- a/arch/arm/boot/dts/st/stih418-b2264.dts
>> +++ b/arch/arm/boot/dts/st/stih418-b2264.dts
>> @@ -73,15 +73,15 @@ aliases {
>>  		ethernet0 = &ethernet0;
>>  	};
>>  
>> -	soc {
>> -		leds {
>> -			compatible = "gpio-leds";
>> -			led-green {
>> -				gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
>> -				default-state = "off";
>> -			};
>> +	leds {
>> +		compatible = "gpio-leds";
>> +		led-green {
>> +			gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
>> +			default-state = "off";
>>  		};
>> +	};
>>  
>> +	soc {
>>  		pin-controller-sbc@...f080 {
>>  			gmac1 {
>>  				rgmii1-0 {
> Applied on sti-next
> 
> Thanks
> Patrice
Applied on sti-next

Thanks
Patrice