| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230816101120.885812-1-abel.vesa@linaro.org>
Date: Wed, 16 Aug 2023 13:11:20 +0300
From: Abel Vesa <abel.vesa@...aro.org>
To: Mike Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>
Cc: NXP Linux Team <linux-imx@....com>, linux-clk@...r.kernel.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: [GIT PULL] clk: imx: Updates for v6.6
The following changes since commit 06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5:
Linux 6.5-rc1 (2023-07-09 13:53:13 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux.git/ tags/clk-imx-6.6
for you to fetch changes up to 72d00e560d10665e6139c9431956a87ded6e9880:
clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz (2023-08-14 12:52:32 +0300)
----------------------------------------------------------------
i.MX clocks changes for 6.6
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() for GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from PLL14xx rate table to allow
glitch free switching
----------------------------------------------------------------
Ahmad Fatoum (2):
clk: imx: composite-8m: fix clock pauses when set_rate would be a no-op
clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz
Chancel Liu (2):
dt-bindings: clock: imx93: Add PDM IPG clk
clk: imx93: Add PDM IPG clk
Christophe JAILLET (1):
clk: imx: clk-gpr-mux: Simplify .determine_rate()
Jacky Bai (1):
clk: imx: Add 519.75MHz frequency support for imx9 pll
Marco Felsch (3):
clk: imx8mp: fix sai4 clock
dt-bindings: clocks: imx8mp: make sai4 a dummy clock
clk: imx: pll14xx: align pdiv with reference manual
Martin Kaiser (2):
clk: imx25: print silicon revision during init
clk: imx25: make __mx25_clocks_init return void
Peng Fan (1):
clk: imx: imx8ulp: update SPLL2 type
Shengjiu Wang (2):
dt-bindings: clock: fsl,imx8-acm: Add audio clock mux support
clk: imx: imx8: add audio clock mux driver
Yangtao Li (1):
clk: imx: clk-imx8qxp-lpcg: Convert to devm_platform_ioremap_resource()
Ye Li (1):
clk: imx: pllv4: Fix SPLL2 MULT range
.../devicetree/bindings/clock/fsl,imx8-acm.yaml | 282 ++++++++++++
drivers/clk/imx/Makefile | 3 +-
drivers/clk/imx/clk-composite-8m.c | 12 +-
drivers/clk/imx/clk-fracn-gppll.c | 1 +
drivers/clk/imx/clk-gpr-mux.c | 8 +-
drivers/clk/imx/clk-imx25.c | 5 +-
drivers/clk/imx/clk-imx8-acm.c | 476 +++++++++++++++++++++
drivers/clk/imx/clk-imx8mp.c | 5 -
drivers/clk/imx/clk-imx8qxp-lpcg.c | 4 +-
drivers/clk/imx/clk-imx8ulp.c | 2 +-
drivers/clk/imx/clk-imx93.c | 4 +-
drivers/clk/imx/clk-pll14xx.c | 13 +-
drivers/clk/imx/clk-pllv4.c | 46 +-
drivers/clk/imx/clk.h | 1 +
include/dt-bindings/clock/imx8-clock.h | 28 ++
include/dt-bindings/clock/imx8mp-clock.h | 2 +-
include/dt-bindings/clock/imx93-clock.h | 3 +-
include/soc/imx/revision.h | 1 +
18 files changed, 851 insertions(+), 45 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/fsl,imx8-acm.yaml
create mode 100644 drivers/clk/imx/clk-imx8-acm.c
Powered by blists - more mailing lists