[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230816145338.GIZNzi8o3d9x9bcPzX@fat_crate.local>
Date: Wed, 16 Aug 2023 16:53:38 +0200
From: Borislav Petkov <bp@...en8.de>
To: Karol Herbst <kherbst@...hat.com>
Cc: linux-kernel@...r.kernel.org, Ben Skeggs <bskeggs@...hat.com>,
Lyude Paul <lyude@...hat.com>, dri-devel@...ts.freedesktop.org,
nouveau@...ts.freedesktop.org, Takashi Iwai <tiwai@...e.de>
Subject: Re: [PATCH] drm/nouveau/disp: fix use-after-free in error handling
of nouveau_connector_create
On Wed, Aug 16, 2023 at 11:51:50AM +0200, Karol Herbst wrote:
> Mind sharing your kernel logs with that patch applied? I suspect your
> system boots up but you might just not have the connector available or
> something? It could be that you have one of those GPUs affected by the
> original change and then we'd have to figure out what to do with that.
Close. With your patch applied, the machine is up and I can log in and
use it. However, the output on the connected monitor stops after...
[ 6.815167] ACPI: \_PR_.CP05: Found 4 idle states
[ 6.825438] ACPI: \_PR_.CP06: Found 4 idle states
[ 6.835661] ACPI: \_PR_.CP07: Found 4 idle states
[ 7.280093] Freeing initrd memory: 8328K
[ 7.601986] tsc: Refined TSC clocksource calibration: 3591.346 MHz
[ 7.608360] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33c46403b59, max_idle_ns: 440795293818 ns
[ 7.620254] clocksource: Switched to clocksource tsc
[ 8.337724] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 8.350553] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 8.375311] serial 0000:00:16.3: enabling device (0000 -> 0003)
[ 8.403681] 0000:00:16.3: ttyS1 at I/O 0xf0a0 (irq = 17, base_baud = 115200) is a 16550A
[ 8.424951] Linux agpgart interface v0.103
[ 8.432456] ACPI: bus type drm_connector registered
... this line here above. It is the last one output. What you see here
below what I'm catching from serial.
[ 8.456734] Console: switching to colour dummy device 80x25
[ 8.464414] nouveau 0000:03:00.0: vgaarb: deactivate vga console
[ 8.473063] nouveau 0000:03:00.0: NVIDIA GT218 (0a8c00b1)
[ 8.594096] nouveau 0000:03:00.0: bios: version 70.18.83.00.08
[ 8.607906] nouveau 0000:03:00.0: fb: 512 MiB DDR3
[ 8.926721] nouveau 0000:03:00.0: DRM: VRAM: 512 MiB
[ 8.931763] nouveau 0000:03:00.0: DRM: GART: 1048576 MiB
[ 8.937156] nouveau 0000:03:00.0: DRM: TMDS table version 2.0
[ 8.942969] nouveau 0000:03:00.0: DRM: DCB version 4.0
[ 8.948173] nouveau 0000:03:00.0: DRM: DCB outp 00: 02000360 00000000
[ 8.954696] nouveau 0000:03:00.0: DRM: DCB outp 01: 02000362 00020010
[ 8.961211] nouveau 0000:03:00.0: DRM: DCB outp 02: 028003a6 0f220010
[ 8.967739] nouveau 0000:03:00.0: DRM: DCB outp 03: 01011380 00000000
[ 8.974261] nouveau 0000:03:00.0: DRM: DCB outp 04: 08011382 00020010
[ 8.980769] nouveau 0000:03:00.0: DRM: DCB outp 05: 088113c6 0f220010
[ 8.987293] nouveau 0000:03:00.0: DRM: DCB conn 00: 00101064
[ 8.993015] nouveau 0000:03:00.0: DRM: DCB conn 01: 00202165
[ 9.005724] nouveau 0000:03:00.0: DRM: MM: using COPY for buffer copies
[ 9.023889] [drm] Initialized nouveau 1.3.1 20120801 for 0000:03:00.0 on minor 0
[ 9.032044] nouveau 0000:03:00.0: [drm] Cannot find any crtc or sizes
[ 9.162909] megasas: 07.725.01.00-rc1
[ 9.167537] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[ 9.176058] ahci 0000:00:1f.2: version 3.0
[ 9.194078] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 9.202487] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 9.243154] scsi host0: ahci
[ 9.252090] scsi host1: ahci
[ 9.260389] scsi host2: ahci
[ 9.268061] scsi host3: ahci
[ 9.273542] scsi host4: ahci
[ 9.279071] scsi host5: ahci
...
and so on until full boot.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
Powered by blists - more mailing lists