[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1692306801-13191-1-git-send-email-justin.chen@broadcom.com>
Date: Thu, 17 Aug 2023 14:13:18 -0700
From: Justin Chen <justin.chen@...adcom.com>
To: linux-serial@...r.kernel.org
Cc: Justin Chen <justin.chen@...adcom.com>,
Al Cooper <alcooperx@...il.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@...adcom.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>,
Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Florian Fainelli <f.fainelli@...il.com>,
John Ogness <john.ogness@...utronix.de>,
Jiaqing Zhao <jiaqing.zhao@...ux.intel.com>,
linux-kernel@...r.kernel.org (open list:TTY LAYER)
Subject: [PATCH v2] serial: 8250_bcm7271: improve bcm7271 8250 port
The 8250 BCM7271 UART is not a direct match to PORT_16550A and other
generic ports do not match its hardware capabilities. PORT_ALTR matches
the rx trigger levels, but its vendor configurations are not compatible.
Unfortunately this means we need to create another port to fully capture
the hardware capabilities of the BCM7271 UART.
To alleviate some latency pressures, we default the rx trigger level to 8.
Signed-off-by: Justin Chen <justin.chen@...adcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@...adcom.com>
Acked-by: Doug Berger <opendmb@...il.com>
---
drivers/tty/serial/8250/8250_bcm7271.c | 4 +---
drivers/tty/serial/8250/8250_port.c | 8 ++++++++
include/uapi/linux/serial_core.h | 3 +++
3 files changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c
index d4b05d7ad9e8..aa5aff046756 100644
--- a/drivers/tty/serial/8250/8250_bcm7271.c
+++ b/drivers/tty/serial/8250/8250_bcm7271.c
@@ -1042,7 +1042,7 @@ static int brcmuart_probe(struct platform_device *pdev)
dev_dbg(dev, "DMA is %senabled\n", priv->dma_enabled ? "" : "not ");
memset(&up, 0, sizeof(up));
- up.port.type = PORT_16550A;
+ up.port.type = PORT_BCM7271;
up.port.uartclk = clk_rate;
up.port.dev = dev;
up.port.mapbase = mapbase;
@@ -1056,8 +1056,6 @@ static int brcmuart_probe(struct platform_device *pdev)
| UPF_FIXED_PORT | UPF_FIXED_TYPE;
up.port.dev = dev;
up.port.private_data = priv;
- up.capabilities = UART_CAP_FIFO | UART_CAP_AFE;
- up.port.fifosize = 32;
/* Check for a fixed line number */
ret = of_alias_get_id(np, "serial");
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 16aeb1420137..9f05745e221b 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -322,6 +322,14 @@ static const struct serial8250_config uart_config[] = {
.rxtrig_bytes = {2, 66, 130, 194},
.flags = UART_CAP_FIFO,
},
+ [PORT_BCM7271] = {
+ .name = "Broadcom BCM7271 UART",
+ .fifo_size = 32,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01,
+ .rxtrig_bytes = {1, 8, 16, 30},
+ .flags = UART_CAP_FIFO | UART_CAP_AFE
+ },
};
/* Uart divisor latch read */
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 281fa286555c..9646629496ab 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -144,6 +144,9 @@
/* Blackfin bf5xx */
#define PORT_BFIN 75
+/* Broadcom BCM7271 UART */
+#define PORT_BCM7271 76
+
/* Broadcom SB1250, etc. SOC */
#define PORT_SB1250_DUART 77
--
2.7.4
Download attachment "smime.p7s" of type "application/pkcs7-signature" (4206 bytes)
Powered by blists - more mailing lists