| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <9ba8e8c410a94022bcb1e37506a4353c12f9a7a5.camel@ljones.dev>
Date: Fri, 18 Aug 2023 10:00:25 +1200
From: Luke Jones <luke@...nes.dev>
To: Stefan Binding <sbinding@...nsource.cirrus.com>,
Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.com>
Cc: alsa-devel@...a-project.org, linux-kernel@...r.kernel.org,
patches@...nsource.cirrus.com
Subject: Re: [PATCH v1] ALSA: hda: cs35l41: Support systems with missing
_DSD properties
On Tue, 2023-08-15 at 17:10 +0100, Stefan Binding wrote:
> Some systems using CS35L41 with HDA were released without some
> required _DSD properties in ACPI. To support these special cases,
> add an api to configure the correct properties for systems with
> this issue.
>
> This initial commit moves the no _DSD support for Lenovo
> Legion Laptops (CLSA0100, CLSA0101) into a new framework which
> can be extended to support additional laptops in the future.
>
> Signed-off-by: Stefan Binding <sbinding@...nsource.cirrus.com>
> ---
> sound/pci/hda/Makefile | 2 +-
> sound/pci/hda/cs35l41_hda.c | 65 ++++++-------------------
> sound/pci/hda/cs35l41_hda.h | 1 +
> sound/pci/hda/cs35l41_hda_property.c | 73
> ++++++++++++++++++++++++++++
> sound/pci/hda/cs35l41_hda_property.h | 18 +++++++
> 5 files changed, 108 insertions(+), 51 deletions(-)
> create mode 100644 sound/pci/hda/cs35l41_hda_property.c
> create mode 100644 sound/pci/hda/cs35l41_hda_property.h
>
> diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile
> index c6e6509e7b8e..5506255be895 100644
> --- a/sound/pci/hda/Makefile
> +++ b/sound/pci/hda/Makefile
> @@ -28,7 +28,7 @@ snd-hda-codec-via-objs := patch_via.o
> snd-hda-codec-hdmi-objs := patch_hdmi.o hda_eld.o
>
> # side codecs
> -snd-hda-scodec-cs35l41-objs := cs35l41_hda.o
> +snd-hda-scodec-cs35l41-objs := cs35l41_hda.o
> cs35l41_hda_property.o
> snd-hda-scodec-cs35l41-i2c-objs := cs35l41_hda_i2c.o
> snd-hda-scodec-cs35l41-spi-objs := cs35l41_hda_spi.o
> snd-hda-scodec-cs35l56-objs := cs35l56_hda.o
> diff --git a/sound/pci/hda/cs35l41_hda.c
> b/sound/pci/hda/cs35l41_hda.c
> index 825e551be9bb..f9b77353c266 100644
> --- a/sound/pci/hda/cs35l41_hda.c
> +++ b/sound/pci/hda/cs35l41_hda.c
> @@ -19,6 +19,7 @@
> #include "hda_component.h"
> #include "cs35l41_hda.h"
> #include "hda_cs_dsp_ctl.h"
> +#include "cs35l41_hda_property.h"
>
> #define CS35L41_FIRMWARE_ROOT "cirrus/"
> #define CS35L41_PART "cs35l41"
> @@ -1315,8 +1316,7 @@ static int cs35l41_hda_apply_properties(struct
> cs35l41_hda *cs35l41)
> return cs35l41_hda_channel_map(cs35l41->dev, 0, NULL, 1,
> &hw_cfg->spk_pos);
> }
>
> -static int cs35l41_get_speaker_id(struct device *dev, int amp_index,
> - int num_amps, int fixed_gpio_id)
> +int cs35l41_get_speaker_id(struct device *dev, int amp_index, int
> num_amps, int fixed_gpio_id)
> {
> struct gpio_desc *speaker_id_desc;
> int speaker_id = -ENODEV;
> @@ -1370,49 +1370,6 @@ static int cs35l41_get_speaker_id(struct
> device *dev, int amp_index,
> return speaker_id;
> }
>
> -/*
> - * Device CLSA010(0/1) doesn't have _DSD so a gpiod_get by the label
> reset won't work.
> - * And devices created by serial-multi-instantiate don't have their
> device struct
> - * pointing to the correct fwnode, so acpi_dev must be used here.
> - * And devm functions expect that the device requesting the resource
> has the correct
> - * fwnode.
> - */
> -static int cs35l41_no_acpi_dsd(struct cs35l41_hda *cs35l41, struct
> device *physdev, int id,
> - const char *hid)
> -{
> - struct cs35l41_hw_cfg *hw_cfg = &cs35l41->hw_cfg;
> -
> - /* check I2C address to assign the index */
> - cs35l41->index = id == 0x40 ? 0 : 1;
> - cs35l41->channel_index = 0;
> - cs35l41->reset_gpio = gpiod_get_index(physdev, NULL, 0,
> GPIOD_OUT_HIGH);
> - cs35l41->speaker_id = cs35l41_get_speaker_id(physdev, 0, 0,
> 2);
> - hw_cfg->spk_pos = cs35l41->index;
> - hw_cfg->gpio2.func = CS35L41_INTERRUPT;
> - hw_cfg->gpio2.valid = true;
> - hw_cfg->valid = true;
> -
> - if (strncmp(hid, "CLSA0100", 8) == 0) {
> - hw_cfg->bst_type = CS35L41_EXT_BOOST_NO_VSPK_SWITCH;
> - } else if (strncmp(hid, "CLSA0101", 8) == 0) {
> - hw_cfg->bst_type = CS35L41_EXT_BOOST;
> - hw_cfg->gpio1.func = CS35l41_VSPK_SWITCH;
> - hw_cfg->gpio1.valid = true;
> - } else {
> - /*
> - * Note: CLSA010(0/1) are special cases which use a
> slightly different design.
> - * All other HIDs e.g. CSC3551 require valid ACPI
> _DSD properties to be supported.
> - */
> - dev_err(cs35l41->dev, "Error: ACPI _DSD Properties
> are missing for HID %s.\n", hid);
> - hw_cfg->valid = false;
> - hw_cfg->gpio1.valid = false;
> - hw_cfg->gpio2.valid = false;
> - return -EINVAL;
> - }
> -
> - return 0;
> -}
> -
> static int cs35l41_hda_read_acpi(struct cs35l41_hda *cs35l41, const
> char *hid, int id)
> {
> struct cs35l41_hw_cfg *hw_cfg = &cs35l41->hw_cfg;
> @@ -1438,12 +1395,17 @@ static int cs35l41_hda_read_acpi(struct
> cs35l41_hda *cs35l41, const char *hid, i
> sub = NULL;
> cs35l41->acpi_subsystem_id = sub;
>
> + ret = cs35l41_add_dsd_properties(cs35l41, physdev, id, hid);
> + if (!ret) {
> + dev_info(cs35l41->dev, "Using extra _DSD properties,
> bypassing _DSD in ACPI\n");
> + goto put_physdev;
> + }
> +
> property = "cirrus,dev-index";
> ret = device_property_count_u32(physdev, property);
> - if (ret <= 0) {
> - ret = cs35l41_no_acpi_dsd(cs35l41, physdev, id, hid);
> - goto err_put_physdev;
> - }
> + if (ret <= 0)
> + goto err;
> +
> if (ret > ARRAY_SIZE(values)) {
> ret = -EINVAL;
> goto err;
> @@ -1533,7 +1495,10 @@ static int cs35l41_hda_read_acpi(struct
> cs35l41_hda *cs35l41, const char *hid, i
>
> err:
> dev_err(cs35l41->dev, "Failed property %s: %d\n", property,
> ret);
> -err_put_physdev:
> + hw_cfg->valid = false;
> + hw_cfg->gpio1.valid = false;
> + hw_cfg->gpio2.valid = false;
> +put_physdev:
> put_device(physdev);
>
> return ret;
> diff --git a/sound/pci/hda/cs35l41_hda.h
> b/sound/pci/hda/cs35l41_hda.h
> index bdb35f3be68a..b93bf762976e 100644
> --- a/sound/pci/hda/cs35l41_hda.h
> +++ b/sound/pci/hda/cs35l41_hda.h
> @@ -83,5 +83,6 @@ extern const struct dev_pm_ops cs35l41_hda_pm_ops;
> int cs35l41_hda_probe(struct device *dev, const char *device_name,
> int id, int irq,
> struct regmap *regmap);
> void cs35l41_hda_remove(struct device *dev);
> +int cs35l41_get_speaker_id(struct device *dev, int amp_index, int
> num_amps, int fixed_gpio_id);
>
> #endif /*__CS35L41_HDA_H__*/
> diff --git a/sound/pci/hda/cs35l41_hda_property.c
> b/sound/pci/hda/cs35l41_hda_property.c
> new file mode 100644
> index 000000000000..673f23257a09
> --- /dev/null
> +++ b/sound/pci/hda/cs35l41_hda_property.c
> @@ -0,0 +1,73 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// CS35L41 ALSA HDA Property driver
> +//
> +// Copyright 2023 Cirrus Logic, Inc.
> +//
> +// Author: Stefan Binding <sbinding@...nsource.cirrus.com>
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/string.h>
> +#include "cs35l41_hda_property.h"
> +
> +/*
> + * Device CLSA010(0/1) doesn't have _DSD so a gpiod_get by the label
> reset won't work.
> + * And devices created by serial-multi-instantiate don't have their
> device struct
> + * pointing to the correct fwnode, so acpi_dev must be used here.
> + * And devm functions expect that the device requesting the resource
> has the correct
> + * fwnode.
> + */
> +static int lenovo_legion_no_acpi(struct cs35l41_hda *cs35l41, struct
> device *physdev, int id,
> + const char *hid)
> +{
> + struct cs35l41_hw_cfg *hw_cfg = &cs35l41->hw_cfg;
> +
> + /* check I2C address to assign the index */
> + cs35l41->index = id == 0x40 ? 0 : 1;
> + cs35l41->channel_index = 0;
> + cs35l41->reset_gpio = gpiod_get_index(physdev, NULL, 0,
> GPIOD_OUT_HIGH);
> + cs35l41->speaker_id = cs35l41_get_speaker_id(physdev, 0, 0,
> 2);
> + hw_cfg->spk_pos = cs35l41->index;
> + hw_cfg->gpio2.func = CS35L41_INTERRUPT;
> + hw_cfg->gpio2.valid = true;
> + hw_cfg->valid = true;
> +
> + if (strcmp(hid, "CLSA0100") == 0) {
> + hw_cfg->bst_type = CS35L41_EXT_BOOST_NO_VSPK_SWITCH;
> + } else if (strcmp(hid, "CLSA0101") == 0) {
> + hw_cfg->bst_type = CS35L41_EXT_BOOST;
> + hw_cfg->gpio1.func = CS35l41_VSPK_SWITCH;
> + hw_cfg->gpio1.valid = true;
> + }
> +
> + return 0;
> +}
> +
> +struct cs35l41_prop_model {
> + const char *hid;
> + const char *ssid;
> + int (*add_prop)(struct cs35l41_hda *cs35l41, struct device
> *physdev, int id,
> + const char *hid);
> +};
> +
> +const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
> + { "CLSA0100", NULL, lenovo_legion_no_acpi },
> + { "CLSA0101", NULL, lenovo_legion_no_acpi },
> + {}
> +};
> +
> +int cs35l41_add_dsd_properties(struct cs35l41_hda *cs35l41, struct
> device *physdev, int id,
> + const char *hid)
> +{
> + const struct cs35l41_prop_model *model;
> +
> + for (model = cs35l41_prop_model_table; model->hid > 0;
> model++) {
> + if (!strcmp(model->hid, hid) &&
> + (!model->ssid ||
> + (cs35l41->acpi_subsystem_id &&
> + !strcmp(model->ssid, cs35l41-
> >acpi_subsystem_id))))
> + return model->add_prop(cs35l41, physdev, id,
> hid);
> + }
> +
> + return -ENOENT;
> +}
> diff --git a/sound/pci/hda/cs35l41_hda_property.h
> b/sound/pci/hda/cs35l41_hda_property.h
> new file mode 100644
> index 000000000000..fd834042e2fd
> --- /dev/null
> +++ b/sound/pci/hda/cs35l41_hda_property.h
> @@ -0,0 +1,18 @@
> +/* SPDX-License-Identifier: GPL-2.0
> + *
> + * CS35L41 ALSA HDA Property driver
> + *
> + * Copyright 2023 Cirrus Logic, Inc.
> + *
> + * Author: Stefan Binding <sbinding@...nsource.cirrus.com>
> + */
> +
> +#ifndef CS35L41_HDA_PROP_H
> +#define CS35L41_HDA_PROP_H
> +
> +#include <linux/device.h>
> +#include "cs35l41_hda.h"
> +
> +int cs35l41_add_dsd_properties(struct cs35l41_hda *cs35l41, struct
> device *physdev, int id,
> + const char *hid);
> +#endif /* CS35L41_HDA_PROP_H */
Hi Stefan,
It's great to see progress here. I've had only a brief look and I
haven't applied the patch as of yet since I have only SPI connected
devices, so I must ask - are you planning any kind of extra support for
the SPI connected devices?
My understanding of these SPI devs are that they are still missing the
"cs-gpios" block in the ACPI and that they likely won't wok without it
even with this patch.
Cheers,
Luke.
Powered by blists - more mailing lists