lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGXv+5EnbovYSfw=_wSKyKTSbDQYu6UW8u8L5bm9PKjN1dVGyQ@mail.gmail.com>
Date:   Thu, 17 Aug 2023 17:19:22 +0800
From:   Chen-Yu Tsai <wenst@...omium.org>
To:     Nícolas F. R. A. Prado 
        <nfraprado@...labora.com>
Cc:     Matthias Brugger <matthias.bgg@...il.com>, kernel@...labora.com,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>,
        Conor Dooley <conor+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH v3] arm64: dts: mediatek: cherry: Configure eDP and
 internal display

On Thu, Aug 17, 2023 at 3:04 AM Nícolas F. R. A. Prado
<nfraprado@...labora.com> wrote:
>
> From: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
>
> Add the required nodes to enable the DisplayPort interface, connected
> to the Embedded DisplayPort port, where we have an internal display.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
> [nfraprado: removed always-on, added vin-supply and enable delay]
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@...labora.com>

Reviewed-by: Chen-Yu Tsai <wenst@...omium.org>
Tested-by: Chen-Yu Tsai <wenst@...omium.org>

> ---
> The MediaTek DRM changes needed for MT8195 have already been queued for
> v6.6 [1], so this DT patch is the last missing piece needed to get
> a working display on MT8195 Tomato.
>
> [1] https://lore.kernel.org/all/20230813152726.14802-1-chunkuang.hu@kernel.org/
>
> Changes in v3:
> - Split from "MT8195 Acer Tomato - devicetrees Part 3" series

The platform thermal patch from that series hasn't been merged either?

> - Removed regulator-always-on as it's no longer needed
> - Added missing vin-supply and regulator-enable-delay
>
>  .../boot/dts/mediatek/mt8195-cherry.dtsi      | 33 +++++++++++++++++++
>  1 file changed, 33 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
> index 37a3e9de90ff..dd5b89b73190 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
> @@ -47,6 +47,19 @@ memory@...00000 {
>                 reg = <0 0x40000000 0 0x80000000>;
>         };
>
> +       pp3300_disp_x: regulator-pp3300-disp-x {
> +               compatible = "regulator-fixed";
> +               regulator-name = "pp3300_disp_x";
> +               regulator-min-microvolt = <3300000>;
> +               regulator-max-microvolt = <3300000>;
> +               regulator-enable-ramp-delay = <2500>;
> +               enable-active-high;
> +               gpio = <&pio 55 GPIO_ACTIVE_HIGH>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&panel_fixed_pins>;
> +               vin-supply = <&pp3300_z2>;
> +       };
> +
>         /* system wide LDO 3.3V power rail */
>         pp3300_z5: regulator-pp3300-ldo-z5 {
>                 compatible = "regulator-fixed";
> @@ -217,6 +230,20 @@ port@1 {
>                         reg = <1>;
>                         edp_out: endpoint {
>                                 data-lanes = <0 1 2 3>;
> +                               remote-endpoint = <&panel_in>;
> +                       };
> +               };
> +       };
> +
> +       aux-bus {
> +               panel {
> +                       compatible = "edp-panel";
> +                       power-supply = <&pp3300_disp_x>;
> +                       backlight = <&backlight_lcd0>;
> +                       port {
> +                               panel_in: endpoint {
> +                                       remote-endpoint = <&edp_out>;
> +                               };
>                         };
>                 };
>         };
> @@ -881,6 +908,12 @@ pins-bus {
>                 };
>         };
>
> +       panel_fixed_pins: panel-pwr-default-pins {
> +               pins-vreg-en {
> +                       pinmux = <PINMUX_GPIO55__FUNC_GPIO55>;
> +               };
> +       };
> +
>         pio_default: pio-default-pins {
>                 pins-wifi-enable {
>                         pinmux = <PINMUX_GPIO58__FUNC_GPIO58>;
> --
> 2.41.0
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ