[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230817150644.3605105-2-vladimir.oltean@nxp.com>
Date: Thu, 17 Aug 2023 18:06:37 +0300
From: Vladimir Oltean <vladimir.oltean@....com>
To: netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-phy@...ts.infradead.org
Cc: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>,
Heiner Kallweit <hkallweit1@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Madalin Bucur <madalin.bucur@....com>,
Ioana Ciornei <ioana.ciornei@....com>,
Camelia Groza <camelia.groza@....com>,
Li Yang <leoyang.li@....com>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor@...nel.org>,
Sean Anderson <sean.anderson@...o.com>,
Maxime Chevallier <maxime.chevallier@...tlin.com>,
Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>
Subject: [RFC PATCH net-next 1/8] phy: introduce the phy_check_cdr_lock() function
Some modules, like the MTIP AN/LT block used as a copper backplane PHY
driver, need this extra information from the SerDes PHY as another
source of "link up" information.
Namely, at 25Gbps, the PCS does not have a MDIO_CTRL1_LPOWER bit
implemented in its MDIO_MMD_PCS:MDIO_CTRL1 register, so a phy_suspend()
procedure will not power down the link, and will not cause a link drop
event on the link partner.
By implementing the networking phy_suspend() as phy_power_off() in the
SerDes and introducing phy_check_cdr_lock() as a link indication, we are
able to detect that condition and signal it to upper layers of the
network stack.
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
drivers/phy/phy-core.c | 18 ++++++++++++++++++
include/linux/phy/phy.h | 22 ++++++++++++++++++++++
2 files changed, 40 insertions(+)
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index 96a0b1e111f3..e611ebe993c7 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -553,6 +553,24 @@ int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
}
EXPORT_SYMBOL_GPL(phy_validate);
+int phy_check_cdr_lock(struct phy *phy, bool *cdr_locked)
+{
+ int ret;
+
+ if (!phy)
+ return -EINVAL;
+
+ if (!phy->ops->check_cdr_lock)
+ return -EOPNOTSUPP;
+
+ mutex_lock(&phy->mutex);
+ ret = phy->ops->check_cdr_lock(phy, cdr_locked);
+ mutex_unlock(&phy->mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phy_check_cdr_lock);
+
/**
* _of_phy_get() - lookup and obtain a reference to a phy by phandle
* @np: device_node for which to get the phy
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index f6d607ef0e80..456d21c67e4f 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -122,6 +122,19 @@ struct phy_ops {
union phy_configure_opts *opts);
int (*reset)(struct phy *phy);
int (*calibrate)(struct phy *phy);
+
+ /**
+ * @check_cdr_lock:
+ *
+ * Optional.
+ *
+ * Check that the CDR (Clock and Data Recovery) logic has locked onto
+ * bit transitions in the RX stream.
+ *
+ * Returns: 0 if the operation was successful, negative error code
+ * otherwise.
+ */
+ int (*check_cdr_lock)(struct phy *phy, bool *cdr_locked);
void (*release)(struct phy *phy);
struct module *owner;
};
@@ -236,6 +249,7 @@ int phy_set_speed(struct phy *phy, int speed);
int phy_configure(struct phy *phy, union phy_configure_opts *opts);
int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
union phy_configure_opts *opts);
+int phy_check_cdr_lock(struct phy *phy, bool *cdr_locked);
static inline enum phy_mode phy_get_mode(struct phy *phy)
{
@@ -414,6 +428,14 @@ static inline int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
return -ENOSYS;
}
+static inline int phy_check_cdr_lock(struct phy *phy, bool *cdr_locked)
+{
+ if (!phy)
+ return 0;
+
+ return -ENOSYS;
+}
+
static inline int phy_get_bus_width(struct phy *phy)
{
return -ENOSYS;
--
2.34.1
Powered by blists - more mailing lists