linux-kernel - Re: [PATCH 3/3] arm64: dts: rockchip: Add Orange Pi 5

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <czvylysw2shlmvryimwtaquz747jel5k4dzfel6kgijmome7py@d4exzabfp3ig>
Date:   Thu, 17 Aug 2023 17:30:03 +0200
From:   Ondřej Jirman <megi@....cz>
To:     Muhammed Efe Cetin <efectn@...l.net>
Cc:     conor+dt@...nel.org, devicetree@...r.kernel.org, heiko@...ech.de,
        krzysztof.kozlowski+dt@...aro.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-rockchip@...ts.infradead.org, robh+dt@...nel.org,
        sebastian.reichel@...labora.com
Subject: Re: [PATCH 3/3] arm64: dts: rockchip: Add Orange Pi 5

On Thu, Aug 17, 2023 at 05:57:55PM +0300, Muhammed Efe Cetin wrote:
> 
> Hi, Ondřej
> 
> On 17.08.2023 16:57, Ondřej Jirman wrote:
> > Hi Muhammed,
> > 
> >>>> [...]
> >>>
> >>>> +	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
> >>>> +		compatible = "regulator-fixed";
> >>>> +		regulator-name = "vcc_1v1_nldo_s3";
> >>>> +		regulator-always-on;
> >>>> +		regulator-boot-on;
> >>>> +		regulator-min-microvolt = <1100000>;
> >>>> +		regulator-max-microvolt = <1100000>;
> >>>> +		vin-supply = <&vcc5v0_sys>;
> >>>> +	};
> >>>
> >>> There's no such regulator on the board.
> >>
> >> It's connected to PMIC https://i.imgur.com/sVJdC5K.png
> > 
> > It's not a separate fixed regulator. It's a PMIC output from buck6 https://megous.com/dl/tmp/8630fa17407c75b9.png
> > 
> 
> I think it should be fixed regulator. It's used as vcc13-supply and
> vcc14-supply regulator on PMIC and it's same as other rk3588 boards.

Yes, BUCK6 output is input to some LDOs. If you make this a regulator-fixed,
BUCK6 will not get enabled when those LDOs are enabled, and the LDOs will not
work because they'll lack input power.

Your regulator-fixed does nothing to enable BUCK6 which is where vcc_1v1_nldo_s3
power rail is connected.

It only works for you now, because dcdc-reg6 is marked as regulator-always-on,
so it's already enabled when you need those dependent LDOs.

regards,
	o.

> > So this is VDD2_DDR_S3. If you want to keep the alias, just add extra alias to
> > dcdc-reg6 like this:
> > 
> > 		...
> > 	vcc_1v1_nldo_s3: vdd2_ddr_s3: dcdc-reg6 {
> > 		...
> > 
> >>>