[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZN9gvGTV4qXnFs3c@vergenet.net>
Date: Fri, 18 Aug 2023 14:14:52 +0200
From: Simon Horman <horms@...nel.org>
To: Vladimir Oltean <vladimir.oltean@....com>
Cc: netdev@...r.kernel.org, "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Xiaoliang Yang <xiaoliang.yang_1@....com>,
Claudiu Manoil <claudiu.manoil@....com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
UNGLinuxDriver@...rochip.com, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Michael Walle <michael@...le.cc>,
Richie Pearn <richard.pearn@....com>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH net] net: dsa: felix: fix oversize frame dropping for
always closed tc-taprio gates
On Thu, Aug 17, 2023 at 03:01:11PM +0300, Vladimir Oltean wrote:
> The blamed commit resolved a bug where frames would still get stuck at
> egress, even though they're smaller than the maxSDU[tc], because the
> driver did not take into account the extra 33 ns that the queue system
> needs for scheduling the frame.
>
> It now takes that into account, but the arithmetic that we perform in
> vsc9959_tas_remaining_gate_len_ps() is buggy, because we operate on
> 64-bit unsigned integers, so gate_len_ns - VSC9959_TAS_MIN_GATE_LEN_NS
> may become a very large integer if gate_len_ns < 33 ns.
>
> In practice, this means that we've introduced a regression where all
> traffic class gates which are permanently closed will not get detected
> by the driver, and we won't enable oversize frame dropping for them.
>
> Before:
> mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000
> mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames
> mscc_felix 0000:00:00.5: port 0 tc 1 min gate len 0, sending all frames
> mscc_felix 0000:00:00.5: port 0 tc 2 min gate len 0, sending all frames
> mscc_felix 0000:00:00.5: port 0 tc 3 min gate len 0, sending all frames
> mscc_felix 0000:00:00.5: port 0 tc 4 min gate len 0, sending all frames
> mscc_felix 0000:00:00.5: port 0 tc 5 min gate len 0, sending all frames
> mscc_felix 0000:00:00.5: port 0 tc 6 min gate len 0, sending all frames
> mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS
>
> After:
> mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000
> mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames
> mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
> mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
> mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
> mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
> mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
> mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
> mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS
>
> Fixes: 11afdc6526de ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet")
> Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
Reviewed-by: Simon Horman <horms@...nel.org>
Powered by blists - more mailing lists