linux-kernel - [PATCH 5/8] phy: exynos5-usbdrd: Add 26MHz ref clk support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 18 Aug 2023 22:17:28 -0500
From:   Sam Protsenko <semen.protsenko@...aro.org>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Thinh Nguyen <Thinh.Nguyen@...opsys.com>
Cc:     JaeHun Jung <jh0801.jung@...sung.com>,
        Marek Szyprowski <m.szyprowski@...sung.com>,
        Sylwester Nawrocki <s.nawrocki@...sung.com>,
        Conor Dooley <conor+dt@...nel.org>,
        Vinod Koul <vkoul@...nel.org>,
        Kishon Vijay Abraham I <kishon@...nel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Alim Akhtar <alim.akhtar@...sung.com>,
        Marc Kleine-Budde <mkl@...gutronix.de>,
        Heiko Stuebner <heiko@...ech.de>,
        linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-samsung-soc@...r.kernel.org
Subject: [PATCH 5/8] phy: exynos5-usbdrd: Add 26MHz ref clk support

Modern Exynos chips (like Exynos850) might have 26 MHz OSCCLK external
clock, which is also used as a PHY reference clock. For some USB PHY
controllers (e.g USB DRD PHY block on Exynos850) there is no need to set
the refclk frequency at all (and corresponding bits in CLKRSTCTRL[7:5]
are marked RESERVED), so that value won't be set in the driver. But
even in that case, 26 MHz support still has to be added, otherwise
exynos5_rate_to_clk() fails, which leads in turn to probe error.

Add the correct value for 26MHz refclk to make it possible to add
support for new Exynos USB DRD PHY controllers.

Signed-off-by: Sam Protsenko <semen.protsenko@...aro.org>
---
 drivers/phy/samsung/phy-exynos5-usbdrd.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
index 1ece4a1a1a6e..41508db87b9b 100644
--- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
@@ -30,6 +30,7 @@
 #define EXYNOS5_FSEL_19MHZ2		0x3
 #define EXYNOS5_FSEL_20MHZ		0x4
 #define EXYNOS5_FSEL_24MHZ		0x5
+#define EXYNOS5_FSEL_26MHZ		0x82
 #define EXYNOS5_FSEL_50MHZ		0x7
 
 /* Exynos5: USB 3.0 DRD PHY registers */
@@ -244,6 +245,9 @@ static unsigned int exynos5_rate_to_clk(unsigned long rate, u32 *reg)
 	case 24 * MHZ:
 		*reg = EXYNOS5_FSEL_24MHZ;
 		break;
+	case 26 * MHZ:
+		*reg = EXYNOS5_FSEL_26MHZ;
+		break;
 	case 50 * MHZ:
 		*reg = EXYNOS5_FSEL_50MHZ;
 		break;
-- 
2.39.2