[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230821144151.207339-1-xingyu.wu@starfivetech.com>
Date: Mon, 21 Aug 2023 22:41:46 +0800
From: Xingyu Wu <xingyu.wu@...rfivetech.com>
To: Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Claudiu Beznea <Claudiu.Beznea@...rochip.com>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
Maxim Kochetkov <fido_max@...ox.ru>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor.dooley@...rochip.com>,
Emil Renner Berthing <emil.renner.berthing@...onical.com>
CC: Jose Abreu <joabreu@...opsys.com>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
Walker Chen <walker.chen@...rfivetech.com>,
"Xingyu Wu" <xingyu.wu@...rfivetech.com>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<alsa-devel@...a-project.org>, <linux-riscv@...ts.infradead.org>
Subject: [PATCH v2 0/5] Add I2S support for the StarFive JH7110 SoC
This patch series adds I2S support for the StarFive JH7110 RISC-V
SoC based on Designware I2S controller. There has three I2S channels
(RX/TX0/TX1) on the JH7110 SoC, one of which is for record(RX) and
two for playback(TX).
The first patch adds support for the StarFive JH7110 SoC in the
Designware I2S bindings.
The second patch adds the ops to get data from platform bus in the
I2S driver.
The third patch adds support for the StarFive JH7110 SoC in
the Designware I2S driver.
The fourth patch fixes the name of I2STX1 pinmux.
The last patch adds device node of I2S RX/TX0/TX1 in JH7110 dts.
This patch series is based on Linux-next(20230818) which is merge
clock, syscon and dma nodes for the StarFive JH7110 SoC.
The series has been tested and works normally on the VisionFive 2
board by plugging an audio expansion board.
Changes since v1:
- Added the maxItems of clocks, clock-names and resets on each
I2S controllers in the binding.
- Dropped the useless settings about dma bus width in the I2S driver.
- Used the 'i2s@' instead of 'i2stx@' or 'i2srx@' in the JH7110 dts.
v1: https://lore.kernel.org/all/20230802084301.134122-1-xingyu.wu@starfivetech.com/
Xingyu Wu (5):
ASoC: dt-bindings: snps,designware-i2s: Add StarFive JH7110 SoC
support
ASoC: dwc: Use ops to get platform data
ASoC: dwc: i2s: Add StarFive JH7110 SoC support
riscv: dts: starfive: pinfunc: Fix the pins name of I2STX1
riscv: dts: starfive: Add the nodes and pins of I2Srx/I2Stx0/I2Stx1
.../bindings/sound/snps,designware-i2s.yaml | 108 ++++++-
arch/riscv/boot/dts/starfive/jh7110-pinfunc.h | 4 +-
.../jh7110-starfive-visionfive-2.dtsi | 58 ++++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 65 ++++
include/sound/designware_i2s.h | 3 +
sound/soc/dwc/dwc-i2s.c | 306 ++++++++++++++++--
sound/soc/dwc/local.h | 1 +
7 files changed, 518 insertions(+), 27 deletions(-)
--
2.25.1
Powered by blists - more mailing lists