| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZOOAUlPEMWG4LrUI@lizhi-Precision-Tower-5810>
Date: Mon, 21 Aug 2023 11:23:42 -0400
From: Frank Li <Frank.li@....com>
To: Manivannan Sadhasivam <mani@...nel.org>
Cc: Lorenzo Pieralisi <lpieralisi@...nel.org>,
manivannan.sadhasivam@...aro.org, helgaas@...nel.org,
bhelgaas@...gle.com, devicetree@...r.kernel.org,
gustavo.pimentel@...opsys.com, imx@...ts.linux.dev, kw@...ux.com,
leoyang.li@....com, linux-arm-kernel@...ts.infradead.org,
linux-imx@....com, linux-kernel@...r.kernel.org,
linux-pci@...r.kernel.org, lorenzo.pieralisi@....com,
minghuan.lian@....com, mingkai.hu@....com, robh+dt@...nel.org,
roy.zang@....com, shawnguo@...nel.org, zhiqiang.hou@....com
Subject: Re: [PATCH v11 3/3] PCI: layerscape: Add power management support
for ls1028a
On Mon, Aug 21, 2023 at 04:03:57PM +0530, Manivannan Sadhasivam wrote:
> On Mon, Aug 21, 2023 at 10:21:05AM +0200, Lorenzo Pieralisi wrote:
> > On Thu, Aug 17, 2023 at 06:42:50PM -0400, Frank Li wrote:
> > > On Wed, Aug 16, 2023 at 05:30:10PM +0200, Lorenzo Pieralisi wrote:
> > > > On Wed, Aug 09, 2023 at 11:35:40AM -0400, Frank Li wrote:
> > > > > From: Hou Zhiqiang <Zhiqiang.Hou@....com>
> > > > >
> > > > > Add PME_Turn_off/PME_TO_Ack handshake sequence for ls1028a platform. Call
> > > > > common dwc dw_pcie_suspend(resume)_noirq() function when system enter/exit
> > > > > suspend state.
> > > > >
> > > > > Acked-by: Manivannan Sadhasivam <mani@...nel.org>
> > > > > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@....com>
> > > > > Signed-off-by: Frank Li <Frank.Li@....com>
> > > > > ---
> > > > > drivers/pci/controller/dwc/pci-layerscape.c | 130 ++++++++++++++++++--
> > > > > 1 file changed, 121 insertions(+), 9 deletions(-)
> > > > >
> > > > > diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> > > > > index ed5fb492fe084..b49f654335fd7 100644
> > > > > --- a/drivers/pci/controller/dwc/pci-layerscape.c
> > > > > +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> > > > > @@ -8,9 +8,11 @@
> > > > > * Author: Minghuan Lian <Minghuan.Lian@...escale.com>
> > > > > */
> > > > >
> > > > > +#include <linux/delay.h>
> > > > > #include <linux/kernel.h>
> > > > > #include <linux/interrupt.h>
> > > > > #include <linux/init.h>
> > > > > +#include <linux/iopoll.h>
> > > > > #include <linux/of_pci.h>
> > > > > #include <linux/of_platform.h>
> > > > > #include <linux/of_address.h>
> > > > > @@ -20,6 +22,7 @@
> > > > > #include <linux/mfd/syscon.h>
> > > > > #include <linux/regmap.h>
> > > > >
> > > > > +#include "../../pci.h"
> > > > > #include "pcie-designware.h"
> > > > >
> > > > > /* PEX Internal Configuration Registers */
> > > > > @@ -27,12 +30,26 @@
> > > > > #define PCIE_ABSERR 0x8d0 /* Bridge Slave Error Response Register */
> > > > > #define PCIE_ABSERR_SETTING 0x9401 /* Forward error of non-posted request */
> > > > >
> > > > > +/* PF Message Command Register */
> > > > > +#define LS_PCIE_PF_MCR 0x2c
> > > > > +#define PF_MCR_PTOMR BIT(0)
> > > > > +#define PF_MCR_EXL2S BIT(1)
> > > > > +
> > > > > #define PCIE_IATU_NUM 6
> > > > >
> > > > > +struct ls_pcie_drvdata {
> > > > > + const u32 pf_off;
> > > > > + bool pm_support;
> > > > > +};
> > > > > +
> > > > > struct ls_pcie {
> > > > > struct dw_pcie *pci;
> > > > > + const struct ls_pcie_drvdata *drvdata;
> > > > > + void __iomem *pf_base;
> > > > > + bool big_endian;
> > > > > };
> > > > >
> > > > > +#define ls_pcie_pf_readl_addr(addr) ls_pcie_pf_readl(pcie, addr)
> > > > > #define to_ls_pcie(x) dev_get_drvdata((x)->dev)
> > > > >
> > > > > static bool ls_pcie_is_bridge(struct ls_pcie *pcie)
> > > > > @@ -73,6 +90,60 @@ static void ls_pcie_fix_error_response(struct ls_pcie *pcie)
> > > > > iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR);
> > > > > }
> > > > >
> > > > > +static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off)
> > > > > +{
> > > > > + if (pcie->big_endian)
> > > > > + return ioread32be(pcie->pf_base + off);
> > > > > +
> > > > > + return ioread32(pcie->pf_base + off);
> > > > > +}
> > > > > +
> > > > > +static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val)
> > > > > +{
> > > > > + if (pcie->big_endian)
> > > > > + iowrite32be(val, pcie->pf_base + off);
> > > > > + else
> > > > > + iowrite32(val, pcie->pf_base + off);
> > > > > +}
> > > > > +
> > > > > +static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> > > > > +{
> > > > > + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > > > > + struct ls_pcie *pcie = to_ls_pcie(pci);
> > > > > + u32 val;
> > > > > + int ret;
> > > > > +
> > > > > + val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> > > > > + val |= PF_MCR_PTOMR;
> > > > > + ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> > > > > +
> > > > > + ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> > > > > + val, !(val & PF_MCR_PTOMR),
> > > > > + PCIE_PME_TO_L2_TIMEOUT_US/10,
> > > > > + PCIE_PME_TO_L2_TIMEOUT_US);
> > > > > + if (ret)
> > > > > + dev_err(pcie->pci->dev, "PME_Turn_off timeout\n");
> > > > > +}
> > > > > +
> > > > > +static void ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> > > > > +{
> > > > > + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > > > > + struct ls_pcie *pcie = to_ls_pcie(pci);
> > > > > + u32 val;
> > > > > + int ret;
> > > > > +
> > > > > + val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> > > > > + val |= PF_MCR_EXL2S;
> > > > > + ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> > > >
> > > > What is this write transaction generating in HW ?
> > >
> > > I don't think send anything to to pci bus because it was called before
> > > host init.
> > >
> > > The spec of ls1028 is not clear enough.
> > >
> > > `EXL2S: exit l2 state command. when set to 1, an L2 exit command is
> > > generated. The bit is self clearing. Once the bit is set. SW needs to wait
> > > for the bit to selfclear before sending a new command'
> > >
> > > >
> > > > Why is it needed ? Shouldn't L2 exit happen automatically
> > > > in HW ?
> > >
> > > I tried remove this, PCI can't resume. I think this is specific for ls1028
> > > chip to clear internal logic.
> >
> > Well, if you don't even know what this does how can you write a sane
> > device driver ?
> >
> > Can you ask designers a more detailed description please ?
> >
>
> I often encounter hw quirks like this one and the hw designers will just say
> that "set bit X to make Y happpen". IMO a comment saying that the driver need to
> set PF_MCR_EXL2S bit in LS_PCIE_PF_MCR register for the link to exit L2 state is
> good enough.
>
> > > > > +
> > > > > + ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> > > > > + val, !(val & PF_MCR_EXL2S),
> > > > > + PCIE_PME_TO_L2_TIMEOUT_US/10,
> > > > > + PCIE_PME_TO_L2_TIMEOUT_US);
> > > >
> > > > And why is the timeout value the same used for the PME_turn_off message ?
> > >
> > > I think No spec define it, just reused it. use PCIE_PME_TO_L2_TIMEOUT_US
> > > may cause confuse. What's do you prefered? Just use number,such as 10ms.
> >
> > This delay value is misleading, it is not good to reuse a value for
> > a delay that is most certainly controller specific.
> >
> > From this discussion I would say that having pme_turn_off() and
> > exit_from_l2() hooks is generalizing something we don't know yet
> > it is needed for all DWC based controllers.
> >
> > It is probably worth keeping the layerscape specific changes in
> > the layerscape driver and from there call the "generic" DWC
> > suspend/resume functions:
> >
> > dw_pcie_suspend_noirq()
> > dw_pcie_resume_noirq()
> >
> > rather than adding hooks that we barely know what they are needed for.
> >
> > Mani, what do you think ?
> >
>
> PME_Turn_off procedure may vary between controllers and is really required
> from core DWC perspective. So I'd prefer to keep the pme_turn_off() callback
> and leave exit_from_l2() since later seems to be only required for layerscape.
There are at least two chips that need use exit_from_l2 at layerscape
platform. I think not all dwc platforms implement suspend/resume yet.
Maybe some platform need it also. Of course I can leave it to layerscape
driver. we can change when new platform really need it.
Frank
>
> - Mani
>
> --
> மணிவண்ணன் சதாசிவம்
Powered by blists - more mailing lists