lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5662754.31r3eYUQgx@steina-w>
Date:   Wed, 23 Aug 2023 07:33:30 +0200
From:   Alexander Stein <alexander.stein@...tq-group.com>
To:     Herbert Xu <herbert@...dor.apana.org.au>,
        linux-arm-kernel@...ts.infradead.org
Cc:     linux-crypto@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, Martin Kaiser <martin@...ser.cx>,
        Martin Kaiser <martin@...ser.cx>
Subject: Re: [PATCH 3/3] hwrng: imx-rngc - use polling to wait for end of seeding

Am Dienstag, 22. August 2023, 17:25:53 CEST schrieb Martin Kaiser:
> Use polling to wait until the imx-rngc is properly seeded.

What is the benefit of burning CPU cycles while waiting for hardware?

> We do this only in the init function when the imx-rngc becomes active.
> Polling is ok at this time, there's nothing else we could do while
> we're waiting.
> 
> We can now remove the code for the interrupt and the completion.

Please split the change to polling and IRQ removal into two patches.

> Signed-off-by: Martin Kaiser <martin@...ser.cx>
> ---
>  drivers/char/hw_random/imx-rngc.c | 81 ++++---------------------------
>  1 file changed, 9 insertions(+), 72 deletions(-)
> 
> diff --git a/drivers/char/hw_random/imx-rngc.c
> b/drivers/char/hw_random/imx-rngc.c index d2df468fd460..7ab9aada72d0 100644
> --- a/drivers/char/hw_random/imx-rngc.c
> +++ b/drivers/char/hw_random/imx-rngc.c
> @@ -63,12 +63,6 @@ struct imx_rngc {
>  	struct clk		*clk;
>  	void __iomem		*base;
>  	struct hwrng		rng;
> -	struct completion	rng_op_done;
> -	/*
> -	 * err_reg is written only by the irq handler and read only
> -	 * when interrupts are masked, we need no spinlock
> -	 */
> -	u32			err_reg;
>  };
> 
> 
> @@ -91,15 +85,6 @@ static inline void imx_rngc_irq_mask_clear(struct
> imx_rngc *rngc) writel(cmd, rngc->base + RNGC_COMMAND);
>  }
> 
> -static inline void imx_rngc_irq_unmask(struct imx_rngc *rngc)
> -{
> -	u32 ctrl;
> -
> -	ctrl = readl(rngc->base + RNGC_CONTROL);
> -	ctrl &= ~(RNGC_CTRL_MASK_DONE | RNGC_CTRL_MASK_ERROR);
> -	writel(ctrl, rngc->base + RNGC_CONTROL);
> -}
> -
>  static int imx_rngc_self_test(struct imx_rngc *rngc)
>  {
>  	u32 cmd, status;
> @@ -143,56 +128,32 @@ static int imx_rngc_read(struct hwrng *rng, void
> *data, size_t max, bool wait) return retval ? retval : -EIO;
>  }
> 
> -static irqreturn_t imx_rngc_irq(int irq, void *priv)
> -{
> -	struct imx_rngc *rngc = (struct imx_rngc *)priv;
> -	u32 status;
> -
> -	/*
> -	 * clearing the interrupt will also clear the error register
> -	 * read error and status before clearing
> -	 */
> -	status = readl(rngc->base + RNGC_STATUS);
> -	rngc->err_reg = readl(rngc->base + RNGC_ERROR);
> -
> -	imx_rngc_irq_mask_clear(rngc);
> -
> -	if (status & (RNGC_STATUS_SEED_DONE | RNGC_STATUS_ST_DONE))
> -		complete(&rngc->rng_op_done);
> -
> -	return IRQ_HANDLED;
> -}
> -
>  static int imx_rngc_init(struct hwrng *rng)
>  {
>  	struct imx_rngc *rngc = container_of(rng, struct imx_rngc, rng);
> -	u32 cmd, ctrl;
> +	u32 cmd, ctrl, status, err_reg;
>  	int ret;
> 
>  	/* clear error */
>  	cmd = readl(rngc->base + RNGC_COMMAND);
>  	writel(cmd | RNGC_CMD_CLR_ERR, rngc->base + RNGC_COMMAND);
> 
> -	imx_rngc_irq_unmask(rngc);
> -
>  	/* create seed, repeat while there is some statistical error */
>  	do {
>  		/* seed creation */
>  		cmd = readl(rngc->base + RNGC_COMMAND);
>  		writel(cmd | RNGC_CMD_SEED, rngc->base + RNGC_COMMAND);
> 
> -		ret = wait_for_completion_timeout(&rngc->rng_op_done,
> msecs_to_jiffies(RNGC_TIMEOUT)); -		if (!ret) {
> -			ret = -ETIMEDOUT;
> -			goto err;
> -		}
> +		ret = readl_poll_timeout(rngc->base + RNGC_STATUS, status,
> +					 status & 
RNGC_STATUS_SEED_DONE, 1000, RNGC_TIMEOUT * 1000);

So you want to poll for up to 3s?

Best regards,
Alexander

> +		if (ret < 0)
> +			return ret;
> 
> -	} while (rngc->err_reg == RNGC_ERROR_STATUS_STAT_ERR);
> +		err_reg = readl(rngc->base + RNGC_ERROR);
> +	} while (err_reg == RNGC_ERROR_STATUS_STAT_ERR);
> 
> -	if (rngc->err_reg) {
> -		ret = -EIO;
> -		goto err;
> -	}
> +	if (err_reg)
> +		return -EIO;
> 
>  	/*
>  	 * enable automatic seeding, the rngc creates a new seed 
automatically
> @@ -202,23 +163,7 @@ static int imx_rngc_init(struct hwrng *rng)
>  	ctrl |= RNGC_CTRL_AUTO_SEED;
>  	writel(ctrl, rngc->base + RNGC_CONTROL);
> 
> -	/*
> -	 * if initialisation was successful, we keep the interrupt
> -	 * unmasked until imx_rngc_cleanup is called
> -	 * we mask the interrupt ourselves if we return an error
> -	 */
>  	return 0;
> -
> -err:
> -	imx_rngc_irq_mask_clear(rngc);
> -	return ret;
> -}
> -
> -static void imx_rngc_cleanup(struct hwrng *rng)
> -{
> -	struct imx_rngc *rngc = container_of(rng, struct imx_rngc, rng);
> -
> -	imx_rngc_irq_mask_clear(rngc);
>  }
> 
>  static int __init imx_rngc_probe(struct platform_device *pdev)
> @@ -254,12 +199,9 @@ static int __init imx_rngc_probe(struct platform_device
> *pdev) if (rng_type != RNGC_TYPE_RNGC && rng_type != RNGC_TYPE_RNGB)
>  		return -ENODEV;
> 
> -	init_completion(&rngc->rng_op_done);
> -
>  	rngc->rng.name = pdev->name;
>  	rngc->rng.init = imx_rngc_init;
>  	rngc->rng.read = imx_rngc_read;
> -	rngc->rng.cleanup = imx_rngc_cleanup;
>  	rngc->rng.quality = 19;
> 
>  	rngc->dev = &pdev->dev;
> @@ -267,11 +209,6 @@ static int __init imx_rngc_probe(struct platform_device
> *pdev)
> 
>  	imx_rngc_irq_mask_clear(rngc);
> 
> -	ret = devm_request_irq(&pdev->dev,
> -			irq, imx_rngc_irq, 0, pdev->name, (void *)rngc);
> -	if (ret)
> -		return dev_err_probe(&pdev->dev, ret, "Can't get interrupt 
working.\n");
> -
>  	if (self_test) {
>  		ret = imx_rngc_self_test(rngc);
>  		if (ret)


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ