| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230823151005.v6.2.I8f20fdfe34a2e8a38373bbd65587754b324f3dcb@changeid>
Date: Wed, 23 Aug 2023 15:13:06 +0800
From: Sheng-Liang Pan <sheng-liang.pan@...nta.corp-partner.google.com>
To: LKML <linux-kernel@...r.kernel.org>
Cc: dianders@...omium.org,
Sheng-Liang Pan <sheng-liang.pan@...nta.corp-partner.google.com>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
cros-qcom-dts-watchers@...omium.org, devicetree@...r.kernel.org,
linux-arm-msm@...r.kernel.org
Subject: [PATCH v6 2/2] arm64: dts: qcom: sc7180: Add sku_id and board id for lazor/limozeen
SKU ID 10: Lazor LTE+Wifi, no-esim (Strapped 0 X 0)
SKU ID 15: Limozeen LTE+Wifi, TS, no esim (Strapped 1 X 0)
SKU ID 18: Limozeen LTE+Wifi, no TS, no esim (Strapped X 0 0)
Even though the "no esim" boards are strapped differently than
ones that have an esim, the esim isn't represented in the
device tree so the same device tree can be used for LTE w/ esim
and LTE w/out esim.
add BRD_ID(0, Z, 0) = 10 for new board with ALC5682i-VS
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@...nta.corp-partner.google.com>
---
This patch base on patch[1] which move trogdor rt5682s bits to a fragment.
[1] https://lore.kernel.org/r/20230816112143.1.I7227efd47e0dc42b6ff243bd22aa1a3e01923220@changeid/
Changes in v6:
- commit update, add dependent patch link
- remove unnecessary symbol
- sort out the order of properties
Changes in v5:
- include rt5682s node for new board version 10
Changes in v4:
- combine pathc2 and patch3
Changes in v3:
- sort out the node order alphabetically
Changes in v2:
- add new entry rev9 with Parade bridge chip
- correct newly create dts files
arch/arm64/boot/dts/qcom/Makefile | 5 +++
...sc7180-trogdor-lazor-limozeen-nots-r10.dts | 29 ++++++++++++
.../sc7180-trogdor-lazor-limozeen-nots-r9.dts | 6 +--
.../sc7180-trogdor-lazor-limozeen-r10.dts | 45 +++++++++++++++++++
.../qcom/sc7180-trogdor-lazor-limozeen-r9.dts | 10 ++---
.../dts/qcom/sc7180-trogdor-lazor-r10-kb.dts | 23 ++++++++++
.../dts/qcom/sc7180-trogdor-lazor-r10-lte.dts | 27 +++++++++++
.../dts/qcom/sc7180-trogdor-lazor-r10.dts | 19 ++++++++
.../dts/qcom/sc7180-trogdor-lazor-r9-kb.dts | 4 +-
.../dts/qcom/sc7180-trogdor-lazor-r9-lte.dts | 4 +-
.../boot/dts/qcom/sc7180-trogdor-lazor-r9.dts | 4 +-
11 files changed, 162 insertions(+), 14 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r10.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 337abc4ceb17..73e745fb1ff0 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -109,11 +109,16 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9-kb.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r9-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r10.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r10-kb.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r10-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r4.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r9.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r10.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r4.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r5.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r9.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r10.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-parade.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-ti.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-parade.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts
new file mode 100644
index 000000000000..eba15535e1c7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor Limozeen board device tree source
+ *
+ * Copyright 2023 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+#include "sc7180-trogdor-rt5682s-sku.dtsi"
+
+/ {
+ model = "Google Lazor Limozeen without Touchscreen (rev10+)";
+ compatible = "google,lazor-sku6", "google,lazor-sku18", "qcom,sc7180";
+};
+
+/delete-node/ &ap_ts;
+
+&panel {
+ compatible = "edp-panel";
+};
+
+&sdhc_2 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
index 400f9e18977f..a609a2651549 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
@@ -14,11 +14,11 @@
#include "sc7180-trogdor-rt5682i-sku.dtsi"
/ {
- model = "Google Lazor Limozeen without Touchscreen (rev9+)";
- compatible = "google,lazor-sku6", "qcom,sc7180";
+ model = "Google Lazor Limozeen without Touchscreen (rev9)";
+ compatible = "google,lazor-rev9-sku6", "google,lazor-rev9-sku18", "qcom,sc7180";
};
-/delete-node/&ap_ts;
+/delete-node/ &ap_ts;
&panel {
compatible = "edp-panel";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r10.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r10.dts
new file mode 100644
index 000000000000..5cc7c0d8e70b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r10.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor Limozeen board device tree source
+ *
+ * Copyright 2023 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+#include "sc7180-trogdor-rt5682s-sku.dtsi"
+
+/ {
+ model = "Google Lazor Limozeen (rev10+)";
+ compatible = "google,lazor-sku4", "google,lazor-sku15", "qcom,sc7180";
+};
+
+/delete-node/ &ap_ts;
+
+&ap_ts_pen_1v8 {
+ ap_ts: touchscreen@10 {
+ compatible = "elan,ekth3500";
+ reg = <0x10>;
+ pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+ pinctrl-names = "default";
+
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&tlmm>;
+
+ vcc33-supply = <&pp3300_ts>;
+
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&panel {
+ compatible = "auo,b116xa01";
+};
+
+&sdhc_2 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts
index 09a4ff13f072..dd377209dec3 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts
@@ -14,21 +14,21 @@
#include "sc7180-trogdor-rt5682i-sku.dtsi"
/ {
- model = "Google Lazor Limozeen (rev9+)";
- compatible = "google,lazor-sku4", "qcom,sc7180";
+ model = "Google Lazor Limozeen (rev9)";
+ compatible = "google,lazor-rev9-sku4", "google,lazor-rev9-sku15", "qcom,sc7180";
};
-/delete-node/&ap_ts;
+/delete-node/ &ap_ts;
&ap_ts_pen_1v8 {
ap_ts: touchscreen@10 {
compatible = "elan,ekth3500";
reg = <0x10>;
- pinctrl-names = "default";
pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+ pinctrl-names = "default";
- interrupt-parent = <&tlmm>;
interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&tlmm>;
vcc33-supply = <&pp3300_ts>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts
new file mode 100644
index 000000000000..45d34718a1bc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2023 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-lite.dtsi"
+#include "sc7180-trogdor-rt5682s-sku.dtsi"
+
+/ {
+ model = "Google Lazor (rev10+) with KB Backlight";
+ compatible = "google,lazor-sku2", "qcom,sc7180";
+};
+
+&keyboard_backlight {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts
new file mode 100644
index 000000000000..79028d0dd1b0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2023 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+#include "sc7180-trogdor-rt5682s-sku.dtsi"
+
+/ {
+ model = "Google Lazor (rev10+) with LTE";
+ compatible = "google,lazor-sku0", "google,lazor-sku10", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+ status = "okay";
+};
+
+&keyboard_backlight {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10.dts
new file mode 100644
index 000000000000..045827341ea0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2023 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-lite.dtsi"
+#include "sc7180-trogdor-rt5682s-sku.dtsi"
+
+/ {
+ model = "Google Lazor (rev10+)";
+ compatible = "google,lazor", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts
index 1c4f0773a242..faf527972977 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts
@@ -14,8 +14,8 @@
#include "sc7180-lite.dtsi"
/ {
- model = "Google Lazor (rev9+) with KB Backlight";
- compatible = "google,lazor-sku2", "qcom,sc7180";
+ model = "Google Lazor (rev9) with KB Backlight";
+ compatible = "google,lazor-rev9-sku2", "qcom,sc7180";
};
&keyboard_backlight {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts
index ec73943abc4c..d737fd0637fb 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts
@@ -14,8 +14,8 @@
#include "sc7180-trogdor-rt5682i-sku.dtsi"
/ {
- model = "Google Lazor (rev9+) with LTE";
- compatible = "google,lazor-sku0", "qcom,sc7180";
+ model = "Google Lazor (rev9) with LTE";
+ compatible = "google,lazor-rev9-sku0", "google,lazor-rev9-sku10", "qcom,sc7180";
};
&ap_sar_sensor_i2c {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts
index 6cedc0ba9653..8daad32ff53b 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts
@@ -14,6 +14,6 @@
#include "sc7180-lite.dtsi"
/ {
- model = "Google Lazor (rev9+)";
- compatible = "google,lazor", "qcom,sc7180";
+ model = "Google Lazor (rev9)";
+ compatible = "google,lazor-rev9", "qcom,sc7180";
};
--
2.34.1
Powered by blists - more mailing lists