linux-kernel - [PATCH v2] USB: serial: option: add FOXCONN T99W368/T99W373 product

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230823075751.4437-1-slark_xiao@163.com>
Date:   Wed, 23 Aug 2023 15:57:51 +0800
From:   Slark Xiao <slark_xiao@....com>
To:     johan@...nel.org, gregkh@...uxfoundation.org
Cc:     linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
        Slark Xiao <slark_xiao@....com>
Subject: [PATCH v2] USB: serial: option: add FOXCONN T99W368/T99W373 product

The difference of T99W368 and T99W373 is the chip solution.
T99W368 is designed based on Qualcomm SDX65 and T99W373 is SDX62.

Test evidence as below:
T:  Bus=01 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#=  7 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e0f0 Rev=05.04
S:  Manufacturer=FII
S:  Product=OLYMPIC USB WWAN Adapter
S:  SerialNumber=78ada8c4
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

T:  Bus=01 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#=  8 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e0ee Rev=05.04
S:  Manufacturer=FII
S:  Product=OLYMPIC USB WWAN Adapter
S:  SerialNumber=78ada8d5
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

Both of them share the same port configuration:
0&1: MBIM, 2: Modem, 3:GNSS, 4:NMEA, 5:Diag
GNSS port don't use serial driver.

Signed-off-by: Slark Xiao <slark_xiao@....com>
---
v2: Remove defines of Foxconn vendor and product name.
---
 drivers/usb/serial/option.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 8ac98e60fff5..d53ebe6ab2a5 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2232,6 +2232,10 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0db, 0xff),			/* Foxconn T99W265 MBIM */
 	  .driver_info = RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0ee, 0xff),			/* Foxconn T99W368 MBIM */
+	  .driver_info = RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0f0, 0xff),			/* Foxconn T99W373 MBIM */
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE(0x1508, 0x1001),						/* Fibocom NL668 (IOT version) */
 	  .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
 	{ USB_DEVICE(0x1782, 0x4d10) },						/* Fibocom L610 (AT mode) */
-- 
2.25.1