| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230823081339.GK3737@thinkpad>
Date: Wed, 23 Aug 2023 13:43:39 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: Krishna chaitanya chundru <quic_krichai@...cinc.com>
Cc: helgaas@...nel.org, linux-pci@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
quic_vbadigan@...cinc.com, quic_nitegupt@...cinc.com,
quic_skananth@...cinc.com, quic_ramkri@...cinc.com,
quic_parass@...cinc.com, krzysztof.kozlowski@...aro.org,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Manivannan Sadhasivam <mani@...nel.org>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kw@...ux.com>,
Rob Herring <robh@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>
Subject: Re: [PATCH v1] PCI: qcom: Add sysfs entry to change link speed
dynamically
On Thu, Aug 17, 2023 at 08:04:43AM +0530, Krishna chaitanya chundru wrote:
> PCIe can operate on lower GEN speed if client decided based upon
> the bandwidth & latency requirements. To support dynamic GEN speed
> switch adding this sysfs support.
>
> To change the GEN speed the link should be in L0, so first disable
> L0s & L1.
>
> L0s needs to be disabled at both RC & EP because L0s entry is
> independent. For enabling L0s both ends of the link needs to support
> it, so first check if L0s is supported on both ends and then enable
> L0s.
>
> This patch is dependent on "PCI: qcom: Add support for OPP"
> https://lore.kernel.org/linux-arm-msm/1692192264-18515-1-git-send-email-quic_krichai@quicinc.com/T/#t
>
There is also an ongoing proposal to add PCIe bandwidth controller driver [1]
which more or less does the same thing. Check if you can make use of it.
- Mani
[1] https://lore.kernel.org/linux-pci/20230817121708.53213-1-ilpo.jarvinen@linux.intel.com/
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@...cinc.com>
> ---
> drivers/pci/controller/dwc/pcie-qcom.c | 141 +++++++++++++++++++++++++++++++++
> 1 file changed, 141 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 831d158..ad67d17 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -241,10 +241,150 @@ struct qcom_pcie {
> const struct qcom_pcie_cfg *cfg;
> struct dentry *debugfs;
> bool suspended;
> + bool l0s_supported;
> };
>
> #define to_qcom_pcie(x) dev_get_drvdata((x)->dev)
>
> +static void qcom_pcie_icc_update(struct qcom_pcie *pcie);
> +static void qcom_pcie_opp_update(struct qcom_pcie *pcie);
> +
> +static int qcom_pcie_disable_l0s(struct pci_dev *pdev, void *userdata)
> +{
> + int lnkctl;
> +
> + pci_read_config_dword(pdev, pci_pcie_cap(pdev) + PCI_EXP_LNKCTL, &lnkctl);
> + lnkctl &= ~(PCI_EXP_LNKCTL_ASPM_L0S);
> + pci_write_config_word(pdev, pci_pcie_cap(pdev) + PCI_EXP_LNKCTL, lnkctl);
> +
> + return 0;
> +}
> +
> +static int qcom_pcie_check_l0s_support(struct pci_dev *pdev, void *userdata)
> +{
> + struct pci_dev *parent = pdev->bus->self;
> + struct qcom_pcie *pcie = userdata;
> + struct dw_pcie *pci = pcie->pci;
> + int lnkcap;
> +
> + /* check parent supports L0s */
> + if (parent) {
> + dev_err(pci->dev, "parent\n");
> + pci_read_config_dword(parent, pci_pcie_cap(parent) + PCI_EXP_LNKCAP,
> + &lnkcap);
> + if (!(lnkcap & PCI_EXP_LNKCAP_ASPM_L0S)) {
> + dev_info(pci->dev, "Parent does not support L0s\n");
> + pcie->l0s_supported = false;
> + return 0;
> + }
> + }
> +
> + pci_read_config_dword(pdev, pci_pcie_cap(pdev) + PCI_EXP_LNKCAP,
> + &lnkcap);
> + dev_err(pci->dev, "child %x\n", lnkcap);
> + if (!(lnkcap & PCI_EXP_LNKCAP_ASPM_L0S)) {
> + dev_info(pci->dev, "Device does not support L0s\n");
> + pcie->l0s_supported = false;
> + return 0;
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_pcie_enable_l0s(struct pci_dev *pdev, void *userdata)
> +{
> + int lnkctl;
> +
> + pci_read_config_dword(pdev, pci_pcie_cap(pdev) + PCI_EXP_LNKCTL, &lnkctl);
> + lnkctl |= (PCI_EXP_LNKCTL_ASPM_L0S);
> + pci_write_config_word(pdev, pci_pcie_cap(pdev) + PCI_EXP_LNKCTL, lnkctl);
> +
> + return 0;
> +}
> +
> +static ssize_t qcom_pcie_speed_change_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t count)
> +{
> + unsigned int current_speed, target_speed, max_speed;
> + struct qcom_pcie *pcie = dev_get_drvdata(dev);
> + struct pci_bus *child, *root_bus = NULL;
> + struct dw_pcie_rp *pp = &pcie->pci->pp;
> + struct dw_pcie *pci = pcie->pci;
> + struct pci_dev *pdev;
> + u16 offset;
> + u32 val;
> + int ret;
> +
> + list_for_each_entry(child, &pp->bridge->bus->children, node) {
> + if (child->parent == pp->bridge->bus) {
> + root_bus = child;
> + break;
> + }
> + }
> +
> + pdev = root_bus->self;
> +
> + offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> +
> + val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP);
> + max_speed = FIELD_GET(PCI_EXP_LNKCAP_SLS, val);
> +
> + val = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA);
> + current_speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, val);
> +
> + ret = kstrtouint(buf, 10, &target_speed);
> + if (ret)
> + return ret;
> +
> + if (target_speed > max_speed)
> + return -EINVAL;
> +
> + if (current_speed == target_speed)
> + return count;
> +
> + pci_walk_bus(pp->bridge->bus, qcom_pcie_disable_l0s, pcie);
> +
> + /* Disable L1 */
> + val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCTL);
> + val &= ~(PCI_EXP_LNKCTL_ASPM_L1);
> + dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCTL, val);
> +
> + /* Set target GEN speed */
> + val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCTL2);
> + val &= ~PCI_EXP_LNKCTL2_TLS;
> + dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCTL2, val | target_speed);
> +
> + ret = pcie_retrain_link(pdev, true);
> + if (ret)
> + dev_err(dev, "Link retrain failed %d\n", ret);
> +
> + /* Enable L1 */
> + val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCTL);
> + val |= (PCI_EXP_LNKCTL_ASPM_L1);
> + dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCTL, val);
> +
> + pcie->l0s_supported = true;
> + pci_walk_bus(pp->bridge->bus, qcom_pcie_check_l0s_support, pcie);
> +
> + if (pcie->l0s_supported)
> + pci_walk_bus(pp->bridge->bus, qcom_pcie_enable_l0s, pcie);
> +
> + qcom_pcie_icc_update(pcie);
> +
> + qcom_pcie_opp_update(pcie);
> +
> + return count;
> +}
> +static DEVICE_ATTR_WO(qcom_pcie_speed_change);
> +
> +static struct attribute *qcom_pcie_attrs[] = {
> + &dev_attr_qcom_pcie_speed_change.attr,
> + NULL,
> +};
> +ATTRIBUTE_GROUPS(qcom_pcie);
> +
> static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
> {
> gpiod_set_value_cansleep(pcie->reset, 1);
> @@ -1716,6 +1856,7 @@ static struct platform_driver qcom_pcie_driver = {
> .of_match_table = qcom_pcie_match,
> .pm = &qcom_pcie_pm_ops,
> .probe_type = PROBE_PREFER_ASYNCHRONOUS,
> + .dev_groups = qcom_pcie_groups,
> },
> };
> builtin_platform_driver(qcom_pcie_driver);
> --
> 2.7.4
>
--
மணிவண்ணன் சதாசிவம்
Powered by blists - more mailing lists