[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230328-topic-msgram_mpm-v5-2-6e06278896b5@linaro.org>
Date: Wed, 23 Aug 2023 13:15:32 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Thomas Gleixner <tglx@...utronix.de>,
Marc Zyngier <maz@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Shawn Guo <shawn.guo@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: Marijn Suijten <marijn.suijten@...ainline.org>,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org,
Konrad Dybcio <konrad.dybcio@...aro.org>
Subject: [PATCH v5 2/2] irqchip: irq-qcom-mpm: Support passing a slice of
SRAM as reg space
The MPM hardware is accessible to us from the ARM CPUs through a shared
memory region (RPM MSG RAM) that's also concurrently accessed by other
kinds of cores on the system (like modem, ADSP etc.). Modeling this
relation in a (somewhat) sane manner in the device tree basically
requires us to either present the MPM as a child of said memory region
(which makes little sense, as a mapped memory carveout is not a bus),
define nodes which bleed their register spaces into one another, or
passing their slice of the MSG RAM through some kind of a property.
Go with the third option and add a way to map a region passed through
the "qcom,rpm-msg-ram" property as our register space.
The current way of using 'reg' is preserved for ABI reasons.
Acked-by: Shawn Guo <shawn.guo@...aro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
drivers/irqchip/irq-qcom-mpm.c | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/irqchip/irq-qcom-mpm.c b/drivers/irqchip/irq-qcom-mpm.c
index 7124565234a5..7115e3056aa5 100644
--- a/drivers/irqchip/irq-qcom-mpm.c
+++ b/drivers/irqchip/irq-qcom-mpm.c
@@ -14,6 +14,7 @@
#include <linux/mailbox_client.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
@@ -322,8 +323,10 @@ static int qcom_mpm_init(struct device_node *np, struct device_node *parent)
struct device *dev = &pdev->dev;
struct irq_domain *parent_domain;
struct generic_pm_domain *genpd;
+ struct device_node *msgram_np;
struct qcom_mpm_priv *priv;
unsigned int pin_cnt;
+ struct resource res;
int i, irq;
int ret;
@@ -374,9 +377,21 @@ static int qcom_mpm_init(struct device_node *np, struct device_node *parent)
raw_spin_lock_init(&priv->lock);
- priv->base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(priv->base))
- return PTR_ERR(priv->base);
+ /* If we have a handle to an RPM message ram partition, use it. */
+ msgram_np = of_parse_phandle(np, "qcom,rpm-msg-ram", 0);
+ if (msgram_np) {
+ ret = of_address_to_resource(msgram_np, 0, &res);
+ /* Don't use devm_ioremap_resource, as we're accessing a shared region. */
+ priv->base = devm_ioremap(dev, res.start, resource_size(&res));
+ of_node_put(msgram_np);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+ } else {
+ /* Otherwise, fall back to simple MMIO. */
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+ }
for (i = 0; i < priv->reg_stride; i++) {
qcom_mpm_write(priv, MPM_REG_ENABLE, i, 0);
--
2.42.0
Powered by blists - more mailing lists